Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Bisbee has gas!  (Read 6744 times)

Winz

  • WKC Ranger
  • Posts: 1714
Bisbee has gas!
« on: June 11, 2016, 05:22:35 PM »
I think Gen 1 Performers are some of the best kettles Weber has ever produced.  Quality materials and a great design.  That said, I ditched by charcoal bin a long time ago and got rid of the small propane tank as well.  I just don't like the tank hanging down in the front of the kettle.  For quite some time now, I have been using lighter cubes with Bisbee - which is kind of lame given the propane starter is one of the performer's best features.  Time for a new mod!


I started by ordering the gas regulator, piezo starter, and burner tube for a Gen 3 performer.  I wanted the spin on gas bottle feature.  To make it work with my Gen 1 performer, and to position the propane bottle in a horizontal position, I had to fabricate some brackets:








I leave my Slow N Sear in the kettle 90% of the time.  For the burner tube, I copied the idea that @ed3120 and @pbe gummi bear have pioneered - positioning the ignitor to the right of the mounting bracket.  This allows you to focus the flame right under the fuel when using the SNS.





Here you can see the basket I installed where the charcoal bin use to be.  Very handy storage.  I positioned the regulator so the tank would mount parallel to the basket.





The piezo ignitor mounted nicely next to the regulator.  Both the gas adjustment knob and the ignitor button have enough clearance to fit underneath the flip up table when it is closed.





The tip of the tube sits under the SNS perfectly





All rigged up!





Much better - Bisbee now has gas, but no tanks hanging down in front.  The basket and new gas system are pretty simple mods, but provide some good functionality.  I like the piezo ignitor - it is a nice upgrade over the stock Gen 1 unit.





Winz



In an ongoing relationship with a kettle named Bisbee.

Uncle Al

  • WKC Brave
  • Posts: 453
Re: Bisbee has gas!
« Reply #1 on: June 11, 2016, 05:24:21 PM »
Love it!!!

Travis

  • WKC Ambassador
  • Posts: 6537
Re: Bisbee has gas!
« Reply #2 on: June 11, 2016, 05:42:14 PM »
Yeah, I like how you mounted that. Clean look. Good job man!


Sent from my iPad using Tapatalk

pbe gummi bear

  • WKC Mod
  • Posts: 9059
Re: Bisbee has gas!
« Reply #3 on: June 11, 2016, 06:59:43 PM »
That's a really clean GA mod, @Winz. Nice job!
"Have you hugged your Weber today?"
Check out WKC on Facebook:
https://www.facebook.com/pages/Weber-Kettle-Club/521728011229791

jcnaz

  • WKC Performer
  • Posts: 3453
Re: Bisbee has gas!
« Reply #4 on: June 11, 2016, 08:34:45 PM »
That looks great, Winz!
A bunch of black kettles
-JC

Troy

  • Statesman
  • Posts: 9479
Re: Bisbee has gas!
« Reply #5 on: June 11, 2016, 11:42:43 PM »
@Winz that is something else buddy. I absolutely LOVE the stealth gas mod.

Winz

  • WKC Ranger
  • Posts: 1714
Re: Bisbee has gas!
« Reply #6 on: June 12, 2016, 01:47:50 AM »
@Winz that is something else buddy. I absolutely LOVE the stealth gas mod.

Thanks Troy - that's what we shall call it: "the stealth gas mod"

Winz
In an ongoing relationship with a kettle named Bisbee.

WNC

  • WKC Performer
  • Posts: 4076
Re: Bisbee has gas!
« Reply #7 on: June 12, 2016, 04:49:35 AM »
Bisbee looks great like that, super clean!

OoPEZoO

  • WKC Ranger
  • Posts: 663
Re: Bisbee has gas!
« Reply #8 on: June 12, 2016, 04:52:02 AM »
How bad did Weber nail you for the regulator assembly?  I have a SS Performer and one of the twin table OTP's I've been meaning to add new regulators/gas assist to
-Keith

Winz

  • WKC Ranger
  • Posts: 1714
Re: Bisbee has gas!
« Reply #9 on: June 12, 2016, 01:30:19 PM »
How bad did Weber nail you for the regulator assembly?  I have a SS Performer and one of the twin table OTP's I've been meaning to add new regulators/gas assist to

I usually buy stuff like this through ereplacement parts instead of Weber. I think it was around $30

Winz
In an ongoing relationship with a kettle named Bisbee.

Nate

  • WKC Ranger
  • Posts: 999
Re: Bisbee has gas!
« Reply #10 on: June 12, 2016, 01:37:51 PM »
Nice! I'm gonna have to do that to mine. 8)

@Winz do you have the part numbers from ereplacement handy?

Winz

  • WKC Ranger
  • Posts: 1714
Re: Bisbee has gas!
« Reply #11 on: June 12, 2016, 02:45:05 PM »

@Nate
Nice! I'm gonna have to do that to mine. 8)

@Winz do you have the part numbers from ereplacement handy?


Here are the part numbers from my order.   I replaced everything (it was time).
 1 X Regulator Assembly (74237)
1 X Ignition Module (85681)
1 X Burner Assembly (85683)
 1 X Retainer Clip (890415)
Winz
In an ongoing relationship with a kettle named Bisbee.

Maxmbob

  • WKC Ranger
  • Posts: 538
Re: Bisbee has gas!
« Reply #12 on: June 12, 2016, 04:10:57 PM »
Nice clean look, great job.
WTB, Westerner, glen blue,

LightningBoldtz

  • WKC Ambassador
  • Posts: 5965
Re: Bisbee has gas!
« Reply #13 on: June 13, 2016, 05:06:21 AM »
My favorite all time grill just keeps getting better.
I am not a collector, but I do have a small collection.
"You can have everything in life you want if you will just help enough other people get what they want"
8 MBH, 2 WoodDale, a SCG, and other stuff, including Pellet grills.

Jtayres

  • WKC Brave
  • Posts: 181
Re: Bisbee has gas!
« Reply #14 on: June 13, 2016, 07:34:09 AM »
Bisbee is a constant inspiration 
Kettles: 2015 Performer Deluxe (Green), 2001 One Touch Platinum, 1999 Performer gas assist, 1991 Smokey Joe Gold (Green) Gasser: Genesis Silver B