So here's the Cado after doing some cleanup. I was able to get the bottom vents to break free. Used a screw driver to pry around the edges. Pulled the top handle and sanded, stained and sealed.
Still need to replace the bolts on the side handle with SS. Hopefully, when I remove it some of the bowl does not come with it.
Still need to work on removing the rest of the rust from the triangle and clean up the ash pan. I hate doing that. It seams like such a waste to clean the ash pan.
Polished the vent with wd40 and 0000 steel wool. There is a little enamel missing under the lid vent. I have never seen that before.
I really like the old wheels. They are real.
Cleaned the bottom and was able to break two frozen vents free.
I found a cover with another 22 I picked up today. So the Cado is the first Weber I have to be protected with a cover.