Hi all,
I purchased and recently assembled a new Genesis 330. I watched instructional videos so had a good idea of what to expect, so when I opened the box I was initially surprised to see that there was only one pin in the lid. It all looked well packed so I figured it still looked new, so I removed the other pin and carefully removed the lid before taking everything out and preparing it for the build.
Interestingly there was a spare pin in with the parts (inside the plastic with bolts), and I later found a third pin rolling around in the box - seemed a little strange, and had me wondering if this box had been opened before.
After the build I noticed a few defects.
1) Minor scratches on the outside/grey part of the right wing (near the back so I can live with it)
2) A dent in the front left corner of the left wing (small, but big enough to annoy me)
3) A defect/scratch/mark on the front left edge of the hood (also small, but right in the spot where you look).
So I'm wondering if it's normally to have defects like this and you just live with them, or is it not normal and you would try get the parts replaced?
Also is it strange that I had 3 pins for the hood, with one rolling around in the box and one in the plastic with the bolts?
Thanks!