Ok, so I couldn’t resist the thread name but I feel I should clarify some things. First, for those who understand the reference - Voltron is way better than Power Rangers, and second - it really isn’t a “red” Ranger, it is burnt orange. Anywho, a couple of months ago, I was seemingly "one with kettle karma" and scored this Ranger for free. It is actually a really great story that can be found here:
http://weberkettleclub.com/forums/weber-kettles-accessories/your-feel-good-story-of-the-day-kettle-karma-at-its-best-(lengthy-pic-heavy)/msg312401/#msg312401 .
Once I had some free time, I reached out to some of the grillfellas who I knew had Rangers with questions about restoration.
@cwestsmokin and
@glrasmussen were kind enough to respond and help me out with pictures, links, and instructions with a template so I could make a new ash pan. Also
@TheDude was kind enough to send me some replacement hubcaps. Enough talk though…on with the pictures!
I started out with the obvious scrapping.
Bowl scrapped out and off the frame.
Upon further inspection I was disappointed to see the bottom of the bowl. LOTS of pock marks. Ugly, but not the end of the world. Especially since this grill is super low to the ground anyway.
After the bowl came the dismantling of the frame.
Once everything was apart, cleaned, and sanded (if need be). The restoration process really kicked into gear starting with a fresh coat of paint for the legs (which each break down to 2 sections) and back cross beam that holds everything together and the ash pan rests on.
The lid and bowl got the Simply Green bbq cleaner with 0000 steel wool treatment and really came out nicely (LOVE that burnt orange gleam!)
The fifty + year old grates got a vinegar bath for two days with an oil drip tray from Autozone, my roti ring, and an old shower curtain combined with a huge contractor trash bag to act as the “pool liner.’
Soon it was time to start reassembly. I purchased sheet aluminum from Home Depot and got some help with my father in law cutting it and hemming/bending it with a press brake using the measurements and template I got from
@glrasmussen. I did the bowing myself, which could have been better but after a coat of paint, it still looks awesome! I even had enough metal for a second pan!
The frame went together nicely and thanks to
@cwestsmokin’s detective work with his restore, I was able to purchase some NOS bicycle grips that nearly MATCHED the old grips. (Side note, getting these dudes on was the HARDEST part of the restore.) The grips are 7/8” diameter while the Ranger legs are 1” diameter. Thanks to CWest’s suggestion of boiling water to soften the rubber and soap, I was eventually able to get the grips on the Ranger handles.
The last touch was something I came up with. The bottom of the Ranger legs, the part that rests on the ground had two elongated holes from years of being set down/scrapped across concrete. I didn’t want to make them worse so I found some coved patio furniture bumpers thinking I would either have to drill the holes a little bigger for the bumper stems, or glue the stems on if the holes were already too big. As it turned out, they were a perfect match. No more wearing down the metal!
The fifty year old grates came out of the vinegar bath and got cleaned up additionally with a steel wire brush attachment for my cordless drill and now look silver again. I WILL be using these grates, they cleaned up better than I hoped!
At last the restoration is finished and I couldn’t be more excited with the outcome! This Ranger looks great and I can’t wait to have the inaugural cook on it!
Sent from my iPad using
Weber Kettle Club