As I said we are doing a revamp of the handle page. Right now if you order a single screw handle you will get oak with the logo. If you order a double rivet you will get a walnut handle with the logo. I can make whatever, if you need other stuff just send me a note and I can do what you want. I can do custom Lasering I generally don't charge more. It depends on what you want....maybe more for Red Wings logos....I can make handles out of any kind of wood it just might cost more depending on what you want and how expensive the wood is and how hard it is for me to get.
So right now I am making the vent tab handles, the single and double rivet style handles, the small handle for the table on the stainless performer, the rollers for any performers, the Weber name plate on the front of all performers, and a wood insert for the wheels (6"and 8"). You just swap the normally broken white wall piece of plastic and put in the wood piece. Looks awesome. I also started making the inserts for the skinny tread 8" wheels as well from the mid 70's. They always seem to be broken. I do also make white wall stickers for the old metal wheels 6" and 8". I have a skinny sticker for the skinny white walls from the 70's too. Most of the wheels I have, had a very skinny white line painted on them, the line generally didn't fill the whole space, but I think some were different, but that has been my experience.....as always if you have questions please ask, just send me a message....does this help?