Get a load of this Grillmaster

[Idahawk]

It's charcoal and covered in stuff but I dug into it , it has two roto motors sitting down below , the lid rolls back into the grill and the handle above t opens a bun warmer . It's in a basement so I left a deposit until it gets cleared away then it's mine .





The colors are cool it has side tables and storage underneath , sorry about the pics I did this fast and covered it back up .




Sent from my iPhone using Tapatalk - now Free

[Idahawk]

I think I posted this in the wrong spot , feel free to move it , sorry


Sent from my iPhone using Tapatalk - now Free

[addicted-to-smoke]

Of course! A glass lid. When's Weber going to do that?

Looks like a beastie.

[blackdog043]

That's a nice looking grill from what I could see. I would of had to get it out of there somehow though.

[Heyjude]

Very Cool, post more pics when you get it out.. 

[Idahawk]

I'm going to pick this up in the morning , I can't find any info about " grillmaster " ?

It looks like a Big Boy based on style and date , I'll post pictures after we get it out

[BBQmedic]

Sweet!
Well considering your new acquisitions feel free to let me know if you have something to pass along.... Lol :-)

Sent from my HTC6435LVW using Tapatalk

[Idahawk]

Sweet!
Well considering your new acquisitions feel free to let me know if you have something to pass along.... Lol :-)

Sent from my HTC6435LVW using Tapatalk

Once your back in the hood I'm sure we'll figure something out

[MartyG]

I believe Buddy L made grills under that name in that era.  Must be more identification somewhere on the unit though.

[Idahawk]

I believe Buddy L made grills under that name in that era.  Must be more identification somewhere on the unit though.

It was buried,  I couldn't get a look at much of it , but I'll know more tomorrow.

[Idahawk]

Posted pictures over in -off topic

[Idahawk]

[Idahawk]

Things are looking good for a weekend cook , after 4 days in PB blaster the vent on the charcoal bucket finally broke free and is usable now , it was stuck open so it would have ran really hot.




I had also sprayed the temp gauge plate screws with PB they came loose as well. I was able to pull out the lid thermometer , unfortunately it's all pressed together and I won't be able clean the face as I wanted , I used a lighter to test it and it moved , it's just very dirty and smokey not sure what I'm going to do yet .




I sprayed all the moving parts with a lubricant and have allowed it to soak in , I'll do a vinegar bath and then hot soap and water a few times , dry and then re season .

[OoPEZoO]

That thing is cool. I can't wait to see how it cooks for you