Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Can I get some help please  (Read 3116 times)

wessonjb

  • WKC Ranger
  • Posts: 611
Can I get some help please
« on: January 29, 2017, 11:33:47 AM »
Picked up this gasser for $25 today. The cross tube is gone but the main tubes are good . Also , the dripping catch pan is almost rusted out. Other than that she's good to go. Where can I find these parts and is this a genesis silver A ?


Sent from my iPhone using Tapatalk

SteveMBH

  • WKC Brave
  • Posts: 436
Re: Can I get some help please
« Reply #1 on: January 29, 2017, 12:18:53 PM »
When I was looking for a crossover tube for a silver A the cheapest place was I found was Marbeck.com.  I paid $8.75 to my door.

Is the drip catch solid enough to use with the liners?


Sent from my iPhone using Weber Kettle Club mobile app

wessonjb

  • WKC Ranger
  • Posts: 611
Re: Can I get some help please
« Reply #2 on: January 29, 2017, 12:27:11 PM »
When I was looking for a crossover tube for a silver A the cheapest place was I found was Marbeck.com.  I paid $8.75 to my door.

Is the drip catch solid enough to use with the liners?


Sent from my iPhone using Weber Kettle Club mobile app
The slide out tray and the 2 brackets that holds it are about gone. The fire box is solid and so is the 2 burner tubes.


Sent from my iPhone using Tapatalk

wessonjb

  • WKC Ranger
  • Posts: 611
Re: Can I get some help please
« Reply #3 on: January 29, 2017, 12:28:04 PM »
Not too familiar with gassers. This is my first one to own.


Sent from my iPhone using Tapatalk

SteveMBH

  • WKC Brave
  • Posts: 436
Re: Can I get some help please
« Reply #4 on: January 29, 2017, 12:37:29 PM »
Ereplacementparts.com or call weber.  Weber charges a flat $7 for shipping.  I'd price it out on ereplacement then call weber to see if you can get it to your door cheaper.


Sent from my iPhone using Weber Kettle Club mobile app

wessonjb

  • WKC Ranger
  • Posts: 611
Re: Can I get some help please
« Reply #5 on: January 29, 2017, 01:41:32 PM »
Ereplacementparts.com or call weber.  Weber charges a flat $7 for shipping.  I'd price it out on ereplacement then call weber to see if you can get it to your door cheaper.


Sent from my iPhone using Weber Kettle Club mobile app
Thanks for the tip. How can you tell the age ? I can't find out on the internet. All I can find is it's a genesis silver A 


Sent from my iPhone using Tapatalk

SteveMBH

  • WKC Brave
  • Posts: 436
Can I get some help please
« Reply #6 on: January 29, 2017, 01:44:38 PM »
I believe the sticker with the model number was under the control panel.  Take a look under there.


Sent from my iPhone using Weber Kettle Club mobile app

wessonjb

  • WKC Ranger
  • Posts: 611
Re: Can I get some help please
« Reply #7 on: January 29, 2017, 03:00:20 PM »
I believe the sticker with the model number was under the control panel.  Take a look under there.


Sent from my iPhone using Weber Kettle Club mobile app
Thanks


Sent from my iPhone using Tapatalk

LightningBoldtz

  • WKC Ambassador
  • Posts: 5977
Re: Can I get some help please
« Reply #8 on: January 29, 2017, 04:28:04 PM »
Looking this up on Webers site I am thinking this is a 00/01 Genesis Silver A

Crossover tube that you need is

http://www.ereplacementparts.com/crossover-tube-p-1476895.html - 83738 Crossover tube for the Spirit 500/Silver A

The two rails holding on the tray will be much harder to find as they are not even listed in the schematics, Weber may be the best bet.

Regarding the drip try itself, if the aluminum one is missing I just buy the foil ones from Weber and double up, it does the job.

That is a very nice little gasser, they put out a lot of heat for a two burner.
I am not a collector, but I do have a small collection.
"You can have everything in life you want if you will just help enough other people get what they want"

Shoestringshop

  • WKC Performer
  • Posts: 2644
Re: Can I get some help please
« Reply #9 on: February 01, 2017, 03:19:51 PM »
@wessonjb

@wessonjb

Model # 551201
Spirit 500

http://help.weber.com/schematics/browse.aspx?model=551201

This should give you everything you need. All parts are listed.

Good luck
« Last Edit: February 01, 2017, 03:24:44 PM by Shoestringshop »
Wife said "No more GRILLS in this house!" So I bought a 2nd house!

wessonjb

  • WKC Ranger
  • Posts: 611
Re: Can I get some help please
« Reply #10 on: February 01, 2017, 03:22:53 PM »

Looking this up on Webers site I am thinking this is a 00/01 Genesis Silver A

Crossover tube that you need is

http://www.ereplacementparts.com/crossover-tube-p-1476895.html - 83738 Crossover tube for the Spirit 500/Silver A

The two rails holding on the tray will be much harder to find as they are not even listed in the schematics, Weber may be the best bet.

Regarding the drip try itself, if the aluminum one is missing I just buy the foil ones from Weber and double up, it does the job.

That is a very nice little gasser, they put out a lot of heat for a two burner.
thanks for the info. Appreciate it.


Sent from my iPhone using Weber Kettle Club mobile app

wessonjb

  • WKC Ranger
  • Posts: 611
Re: Can I get some help please
« Reply #11 on: February 01, 2017, 03:23:18 PM »

@wessonjb

http://help.weber.com/schematics/browse.aspx?model=551201

This should give you everything you need.

Good luck
thanks for the info and help. Appreciate it.


Sent from my iPhone using Weber Kettle Club mobile app

wessonjb

  • WKC Ranger
  • Posts: 611
Re: Can I get some help please
« Reply #12 on: February 01, 2017, 03:25:27 PM »
Used it for the first time today as is. Keeping it at my job trailer till I'm finished with my current apartment complex we're building. Grilled some deer burgers. she cooks really well and was impressed. Haven't used a gasser much ever.


Sent from my iPhone using Weber Kettle Club mobile app

demosthenes9

  • WKC Ranger
  • Posts: 1473
Re: Can I get some help please
« Reply #13 on: February 01, 2017, 03:31:21 PM »
Weber #88202 Catch Pan Rails for Silver A https://www.amazon.com/dp/B00JWTZ7QM/ref=cm_sw_r_cp_apa_01NKybHQQANPB

Sent from my Nexus 6 using Tapatalk


Shoestringshop

  • WKC Performer
  • Posts: 2644
Re: Can I get some help please
« Reply #14 on: February 01, 2017, 03:32:25 PM »
@wessonjb
I took a closer look at yours and this is your grill...

http://help.weber.com/schematics/browse.aspx?model=2241001

http://help.weber.com/manuals/default.aspx#description

Model #2241001
Description Genesis Silver

But the parts you are looking for should be the same on both. Happy hunting!
« Last Edit: February 01, 2017, 03:34:44 PM by Shoestringshop »
Wife said "No more GRILLS in this house!" So I bought a 2nd house!