Hogsy Where's this gasser!

[zavod44]

I think I have the knob you need.  I'll post pictures of what I have.  I have a brand new leg set, for that same grill.  I also have the burner tube and maybe the burner itself.  I'm not sure what the igniter looks like...


Brian

[Hogsy]

Here's a photo of the igniter (borrowed from glrasmussen)

Those parts would be great Brian
The burner comes apart pretty easy glrasmussen
Just unscrew the indirect/direct knob and the burner pulls out then you'll see the screws and tabs that attach the bowl to the stand
I had to move the burner around a bit till I found a spot where I got a good seal
Cheers
Joel

[glrasmussen]

Here's a photo of the igniter (borrowed from glrasmussen)

Those parts would be great Brian
The burner comes apart pretty easy glrasmussen
Just unscrew the indirect/direct knob and the burner pulls out then you'll see the screws and tabs that attach the bowl to the stand
I had to move the burner around a bit till I found a spot where I got a good seal
Cheers
Joel

So if I remove the knob it all comes out through the bowl?

Greg

[Hogsy]

Yes, it's a simple set up

[zavod44]

Okay this is what I have, you tell me what it is....

















Looks kinda like the stuff you have....


Brian

[Hogsy]

Ill try and explain these parts as best i can, some are fairly obvious others I'm not quite sure of but hopefully will become a little clearer when the manual arrives. The triangle is the base with axle for the wheels, the round black steel part holds the gas bottle in place on top of the triangle, the 2 pronged piece with nuts on the end is the front leg, the square metal piece that your holding in the photo is a cover that fits half way up the side of the cylindrical stand,the knob with weber written on it is for controlling the flame and the tube it's attached to sits inside the cylinder and the burner with the SS shaft with knob attached sits inside of it. The knob is used to shift from indirect to direct cooking positions
I hope that makes sense
Brian if your happy to part with those parts I'm interested
I'll send you a PM
Cheers
Joel

[reillyranch]

I found the parts list and digram for the gas kettles.  The position of the ignitor and burners are drawn, maybe this can help. 

http://imageshack.us/a/img856/5792/ngkettle.png
http://imageshack.us/a/img809/8564/gaskettlepartslist.png
http://imageshack.us/a/img9/8739/lpkettle.png

[Hogsy]

I found the parts list and digram for the gas kettles.  The position of the ignitor and burners are drawn, maybe this can help. 

http://imageshack.us/a/img856/5792/ngkettle.png
http://imageshack.us/a/img809/8564/gaskettlepartslist.png
http://imageshack.us/a/img9/8739/lpkettle.png

Thanks for the photos. That really helps
Any chance you could take another pic of the list of parts.
I can only see the parts list up to 31
Cheers
Joel

[reillyranch]

Hogsy,

Sorry for the delay.  Hope these help

http://imageshack.us/a/img803/9626/gkcoverm.jpg
http://imageshack.us/a/img855/8856/photo2bame.jpg
http://imageshack.us/a/img18/8963/photo3zvf.jpg
http://imageshack.us/photo/my-images/208/photo1ufq.jpg/

[Golly]

I best be getting one of these kettle gassers
Can't let hogsy have something I don't 
mmm maybe a green one

[Hogsy]

Hogsy,

Sorry for the delay.  Hope these help

http://imageshack.us/a/img803/9626/gkcoverm.jpg
http://imageshack.us/a/img855/8856/photo2bame.jpg
http://imageshack.us/a/img18/8963/photo3zvf.jpg
http://imageshack.us/photo/my-images/208/photo1ufq.jpg/

Cheers Ed
That's great

[Golly]

Had a beer and a perv and a smoke with gas warrior yesty
Gave her the once over and she looked mighty fine in the flesh

[Hogsy]

They say things happen in 3's
First I picked up Grandpa's old gasser
Then Golly picked up the same model but in green a week later
And finally I grabbed this one during the week
It looks like an older model, can't wait for it to arrive

[zavod44]

Hogsy your parts are in the mail, it looks like your gonna need them.....


Brian

[Hogsy]

Cheers Brian
I'm eagerly awaiting them
Looks like the new one I'm getting has metal handles on the bowl and no vents on the lid which is pretty weird.
I cooked some pizzas on the gasser last night and they turned out great
Grill temp sat up around the 450 to 500f mark on high using the indirect position
No pics, pizzas were for the kids and pretty uneventful as far as toppings
Cheers
Joel