Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Griddle for kettle  (Read 3872 times)

Tomo1970

  • Smokey Joe
  • Posts: 63
Griddle for kettle
« on: September 22, 2019, 03:10:42 AM »
Hi, we have a birthday party coming up in a few weeks for our 2 boys. We are doing “pancakes and pajama” so most would think no grill necessary - but not people like us!! I’m looking for a full 22” griddle. Any suggestions? Are they hard to come by?


Sent from my iPhone using Weber Kettle Club

vwengguy

  • WKC Ranger
  • Posts: 930
Re: Griddle for kettle
« Reply #1 on: September 22, 2019, 03:51:13 AM »
Ask around in the group if anyone has a Weber griddle grate kit that they might want to sell.
Your other choice ( easier to get ) would be the Lodge pro griddle. It fits in the 22” kettle and just sits on top of the grate!



Sent from my iPhone using Weber Kettle Club

Tomo1970

  • Smokey Joe
  • Posts: 63
Re: Griddle for kettle
« Reply #2 on: September 22, 2019, 04:04:12 AM »
Anyone have any experience with this: http://www.mojoegriddle.com/shop/mojoe-griddle

If it’s 1/4” carbon steel - I can make that.


Sent from my iPhone using Weber Kettle Club

Tomo1970

  • Smokey Joe
  • Posts: 63
Re: Griddle for kettle
« Reply #3 on: September 22, 2019, 04:04:36 AM »

Ask around in the group if anyone has a Weber griddle grate kit that they might want to sell.
Your other choice ( easier to get ) would be the Lodge pro griddle. It fits in the 22” kettle and just sits on top of the grate!



Sent from my iPhone using Weber Kettle Club

Thanks that’s a good option!


Sent from my iPhone using Weber Kettle Club

Tomo1970

  • Smokey Joe
  • Posts: 63
Re: Griddle for kettle
« Reply #4 on: September 22, 2019, 05:21:26 AM »
Think the mojoe griddle will be a bad idea on a performer with the plastic table?


Sent from my iPhone using Weber Kettle Club

ReanimatedRobot

  • WKC Ranger
  • Posts: 1307
Re: Griddle for kettle
« Reply #5 on: September 22, 2019, 05:34:08 AM »
It depends on how hot the griddle is if you set it on or near the plastic table.  I would probably just buy the lodge griddle as it can be used on the grill and in the house.  If you really want to make something that is just for the kettle make sure you design it so there is air flow.  The mojoe griddle wouldn't work good on a charcoal grill because only a little air can escape the bowl.  Most I have seen have a cutout in the center for searing or some openings on the side to allow air flow. 

Personally I would buy some quality grill gloves or welders gloves to handle the griddle and anything else with heat.  I wouldn't set anything hot on or near the plastic table.  I have a cheap plastic table I occasionally use as an additional work table and even a sliver of grinded metal that falls off will stick to it.

This year I purchased some grill armor gloves and a couple combo hook/rake to pick up or spin grates or spread charcoal.  I honestly don't know how I got by so long without them.  Way safer when cooking and it makes clean up right after the cook a breeze as I don't have to wait for everything to cool. Links to both are below.

Grill Armor Gloves
https://smile.amazon.com/gp/product/B00ZORPCGG/ref=ppx_yo_dt_b_asin_title_o07_s00?ie=UTF8&psc=1

Rake/Hook
https://smile.amazon.com/gp/product/B01NBTXYZQ/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1


« Last Edit: September 22, 2019, 05:41:47 AM by ReanimatedRobot »
ISO: 18" & 22" Lime, 22" Cado, Plum SSP, Clean & Colored 18" for Midget Mod, and the usual Grails.

vwengguy

  • WKC Ranger
  • Posts: 930
Re: Griddle for kettle
« Reply #6 on: September 22, 2019, 06:10:10 AM »
You don’t need or want a ton of heat on your griddle to do pancakes or bacon and eggs! I use something around 18-21 coals nicely placed to give even heat and I have used this lots of times and it’s perfect!
Here is a photo of my coals for breakfast cooks. For meats or searing steaks you can easily add a row to it.
Ja it will get Real HOT and Stay hot so if you do need to move it.. be real careful and have a good safe place to set it! Or just close the vents and fire up another grill! [emoji6]


Sent from my iPhone using Weber Kettle Club

Tomo1970

  • Smokey Joe
  • Posts: 63
Re: Griddle for kettle
« Reply #7 on: September 22, 2019, 09:39:36 AM »
I’d like a little more space than what the pro griddle. We have a big family.

Here’s another possibility: https://www.homedepot.com/p/Bayou-Classic-20-in-Cast-Iron-Jumbo-Skillet-7438/100387828

You all think a could inches around the sides will provide enough air flow?


Sent from my iPhone using Weber Kettle Club

ReanimatedRobot

  • WKC Ranger
  • Posts: 1307
Re: Griddle for kettle
« Reply #8 on: September 22, 2019, 02:09:28 PM »
I’d like a little more space than what the pro griddle. We have a big family.

Here’s another possibility: https://www.homedepot.com/p/Bayou-Classic-20-in-Cast-Iron-Jumbo-Skillet-7438/100387828

You all think a could inches around the sides will provide enough air flow?


Sent from my iPhone using Weber Kettle Club
That would be a good cast iron skillet for cooks. I have thought about something similar myself. Maybe not the best for pancakes but for everything else it would probably be fine.

Sent from my SM-G925R4 using Weber Kettle Club mobile app

ISO: 18" & 22" Lime, 22" Cado, Plum SSP, Clean & Colored 18" for Midget Mod, and the usual Grails.

Tomo1970

  • Smokey Joe
  • Posts: 63
Re: Griddle for kettle
« Reply #9 on: September 22, 2019, 03:09:46 PM »

I’d like a little more space than what the pro griddle. We have a big family.

Here’s another possibility: https://www.homedepot.com/p/Bayou-Classic-20-in-Cast-Iron-Jumbo-Skillet-7438/100387828

You all think a could inches around the sides will provide enough air flow?


Sent from my iPhone using Weber Kettle Club
That would be a good cast iron skillet for cooks. I have thought about something similar myself. Maybe not the best for pancakes but for everything else it would probably be fine.

Sent from my SM-G925R4 using Weber Kettle Club mobile app

I decided to give it a try! Decent reviews on Amazon & the review pics show it being used on a kettle - seems like a good fit.

Any reason why you think it might not be the best for pancakes?


Sent from my iPhone using Weber Kettle Club

ReanimatedRobot

  • WKC Ranger
  • Posts: 1307
Re: Griddle for kettle
« Reply #10 on: September 22, 2019, 06:36:46 PM »
You can do pancakes alright, but the higher side wall can get in the way at times. It should work fine though and you will be able to use it for a lot of different cooks.  Enjoy!

Sent from my SM-G925R4 using Weber Kettle Club mobile app

ISO: 18" & 22" Lime, 22" Cado, Plum SSP, Clean & Colored 18" for Midget Mod, and the usual Grails.

Tomo1970

  • Smokey Joe
  • Posts: 63
Re: Griddle for kettle
« Reply #11 on: September 26, 2019, 11:57:41 AM »
Fits great just need to season it and try it out!


Sent from my iPhone using Weber Kettle Club

Schaefd2

  • WKC Ranger
  • Posts: 1301
Re: Griddle for kettle
« Reply #12 on: September 26, 2019, 06:20:54 PM »
Maybe Use a comal? Typically used for tacos, but you could cook a pancake in the bowl, then keep em warm around the edges?
https://www.amazon.com/Comal-Stainless-Inoxidable-Concave-Outdoors/dp/B010FGE3BK


Sent from my iPhone using Weber Kettle Club
I've been called the Robin Hood of Weber Kettles.

HoosierKettle

  • WKC Ambassador
  • Posts: 7366
Re: Griddle for kettle
« Reply #13 on: September 27, 2019, 02:30:21 AM »

Fits great just need to season it and try it out!


Sent from my iPhone using Weber Kettle Club

Very cool!  Just think of all the fried chicken that will fit in there.


Sent from my iPhone using Weber Kettle Club mobile app

DrewZ

  • WKC Ranger
  • Posts: 565
Re: Griddle for kettle
« Reply #14 on: September 27, 2019, 03:27:58 AM »
Anyone have any experience with this: http://www.mojoegriddle.com/shop/mojoe-griddle

If it’s 1/4” carbon steel - I can make that.


Sent from my iPhone using Weber Kettle Club

You could always just by a steel plate on eBay:  https://www.ebay.com/itm/1-4-Steel-Plate-Disc-Shaped-20-00-Diameter-250-A36-Steel-Round-Circle/201988333243?hash=item2f07715ebb:g:HUQAAOSwHnFVnzJF

I bought one to use as a pizza steel.  Holds heat like a mofo  . . .
Drew Z.
70th Anniversary-SSP, A-Code GA, Snap On GA, Blue 18" OTG, Eagles SJ, 18" Tuck-N-Carry Midget, 3-burner Genny Jr., S-320