I have no idea how it happened, but my 26" kettle somehow developed a bad lean. It looks like the leg sockets and bowl are bent and dented. Anyone know how to fix this?(https://uploads.tapatalk-cdn.com/20170723/50ed06a71d8f41bba13436c091c29f44.jpg)(https://uploads.tapatalk-cdn.com/20170723/705306bc2db34369bd4bbe3a36ecdb9a.jpg)(https://uploads.tapatalk-cdn.com/20170723/247e391025040f959bc25fdc80e62270.jpg)(https://uploads.tapatalk-cdn.com/20170723/3329c199c3c69a31e03c57f08bb87916.jpg)
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
I would call Weber customer support. They would probably send you a new bowl if you explain the situation.
I agree. Unless you were trying to roast a 50 pound pig in there or something that shouldn't happen. Their CS is very good. Make sure to go in a register it online if you haven't already. They require that from you.
Have a few drinks last night?
If you put a pipe in the socket I think you can bend it back into position. Gently...
If the kettle is deformed pry on the pipe ,gently, while you tap the inside of the kettle with a rubber hammer.
Preferably you would do this on a soft work bench like wood or plastic, after dismantling the legs and ash system.
Shes going to have some character from now on....
No drinks. I have no idea what happened. I keep it covered in my garage. I went to pull it out yesterday and it was bent like that.
Looks like you keep it clean...It'd be black if I had it.
I use it weekly but try to take care of it.
You can try the rubber mallet technique if your socket to bowl welds are still good. Bolting the leg socket to the bowl can interfere with the ash sweep, so if the welds are broken or soft you have a problem.
Customer service sent me one in three or four days, after I spent weeks trying to figure out what to do. Now I have an extra bowl for a 26" Performer project, or a fire pit.
Sent from my SM-G930V using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
I'd just call Weber and they should take care of you. If you don't want the spare bowl someone here could probably use it for mod month.
Sent from my iPhone using Tapatalk
I called Weber and they said they had to review photos. I haven't heard back.
Give it some time. They will likely review and take care of you.
Sent from my iPhone using Tapatalk
Maybe
@Cellar2ful has some CSI skills and can figure how this happened...probly has a special kit for detecting grill marks on car bumpers
Weber replaced my bowl for similar reasons. It wasn't bent like yours, but the spot welds on the leg sockets were giving up, and it was only a couple years old. I think the 26ers are just too big and heavy for the standard triangle base. I used to think Weber needed to make the mini ranch, but the new summit charcoal fits that niche.
Yours looks like it was hit by something or someone. I don't see it starting to lean like that on it's own.
Quote from: Hell Fire Grill on July 23, 2017, 11:28:34 AM
Maybe @Cellar2ful has some CSI skills and can figure how this happened...probly has a special kit for detecting grill marks on car bumpers
lol- That was my first thought too Ray. Not saying that is the cause here but it does look like a "pulled in to close" or a "backed into" injury. Don't see a lot of damage to two legs like that. One leg yes, usually from being set down or dropped to hard.
I heard Weber had some issues with their 26r leg sockets being welded in the wrong spot. This gave it a weird lean before they broke. Call Weber support. They should send you a new bowl.
Quote from: Davescprktl on July 23, 2017, 12:53:19 PM
I heard Weber had some issues with their 26r leg sockets being welded in the wrong spot. This gave it a weird lean before they broke. Call Weber support. They should send you a new bowl.
Like this....
(https://uploads.tapatalk-cdn.com/20170723/917a6a17cc4c7c1d38714cafc5f09252.jpg)
........Looking for a Westerner
Which leads to this:
(https://farm5.staticflickr.com/4291/35966863091_6eee67e303_b.jpg) (https://flic.kr/p/WNgzka)20151122_112524 (https://flic.kr/p/WNgzka) by jcnaz (https://www.flickr.com/photos/124800561@N08/), on Flickr
Just heard from Weber. They are sending me a new bowl. Weber's customer service is second to none.
Quote from: Hell Fire Grill on July 23, 2017, 11:28:34 AM
Maybe @Cellar2ful has some CSI skills and can figure how this happened...probly has a special kit for detecting grill marks on car bumpers
+1
Haha. If anyone does it'll be @cellar2ful for sure
Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
From you Pics above looks like well-used "Oldie"??
Do you have teenagers? Sometimes unexplainable events happen like that.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Now you will have 2 26er bowls. The broken leg then your new shipment bowl
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)