Okay fellas, I was cleaning up the WSM after the last cook. Took it apart cleaned it up and out of the corner of my eye, I see one of my projects.
(http://uploads.tapatalk-cdn.com/20161114/3f8592cca244086fb1c17f90b77c800b.jpg)
I have an idea...
(http://uploads.tapatalk-cdn.com/20161114/d41dc1027fff76da142d04cb71b40218.jpg)
i already have a red head SSP. So i think i may just sell/trade the read head bowl.
What do you guys think?
i think it will look real good, and if that red is in good shape, I'd like a crack at it to replace my black performer bowl.
I had a SSP cart laying around, I would definitely do that.
Sent from my iPhone using Tapatalk
Cool... I've been wanting to do something like this for awhile, just waiting on the right donor SSP. Go for it!
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
I did this same thing with a old frame i picked up , have extended the lower self a bit more and it works great.
Quote from: Easy on November 15, 2016, 06:16:48 AM
I did this same thing with a old frame i picked up , have extended the lower self a bit more and it works great.
Awesome!!! I am planning on making the lower shelf, 18 x 38 using either cedat 1x6 lumber or 1x6 yellawood. My plans are still on the drawing board. Can you share a few pics if you have any?
I used cedar fencing for mine but when that goes away due to weather I will look at using expanded metal with a square tube frame . Much stronger and would last for like ever.
I am also looking for a good deal on a older early 2000's weber gaser with a side burner so I could always have a chimney starter light source. Just need to be patient.
I will try to get you a couple photos and email them to you shoot your address please.
Sent from my SAMSUNG-SGH-I747 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
I'm interested in buying the bowl. How much and where u located.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
@Speedster the bowl and lid have 3 fellas interested. I will let you know what the out come is. This is the fun part!! all these parts making their way back to "Kettle-Hood".... Thanks for the interest!!
On the same thought... Thinking of using small vertical clamps mounted to the shelf to secure the base/bowl legs to the shelf. Just position the base and lock it in. When its time to clean it up... Just take the WSM down and release the clamps, dump the bowl and there a ya go... I found them on harbor freight for under $5.00 US.... May just have to pick up three of them.
@Easy thanks for the Cedar Idea!! I think that is the way I will go.
Do you fellas think that the heat from the bowl would be an issue? I have a close friend that can source some Stainless steel for under the bowl/base. Would that be overkill or would a trimmed "Grill Mat" work? I just hope this doesn't become a "Tank"...
Take it away....
Thanks!
J
Jettrackmo
If you text me your email I can firward you a few pictures with measurements @ 859-609-4001
Sent from my SAMSUNG-SGH-I747 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Quote from: jeffrackmo on November 16, 2016, 05:52:53 AM
@Easy Sent...
Thanks
Jeff
Check the number I did not get your text.
Easy
Sent from my SAMSUNG-SGH-I747 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
@jeffrackmo Is that an 18 or 22 inch WSM? 8)
RKR. That would be an 18
Quote from: jeffrackmo on November 18, 2016, 10:29:17 AM
RKR. That would be an 18
Okay gang..
I braved the cold and worked on the ssp / WSM cart project.
From this...
(http://uploads.tapatalk-cdn.com/20161204/5d6bcb79b1d7fafcec39052a573fbe29.jpg)
To this...
(http://uploads.tapatalk-cdn.com/20161204/d62f2200e5ac06e7c8ab26f092a6e563.jpg)
Still need a few parts but should be funtional. Need the Weber badge for the front panel and a plug insert for the handle. The clamps I picked up were a bit too big. Took those back today She sits pretty stable. I may not use clamps... eh... who knows.
Anyhoo thanks @easy for the pics of yours and the encouragement. Hope to get a cook or two on her very soon. Even Mrs grillfella was impressed...
Jeff it looks very good hey it has to get up to 40 one of these days. Congrats on the cart.
Enjoy.
Sent from my SAMSUNG-SGH-I747 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Looks great @jeffrackmo
I'll have to check it out tomorrow!
Sent from my iPhone using Tapatalk
in WHAT universe did they make a SSP WSM??!!...LOL...Sweet!
Only in my little corner @varekai. 😊
Cool corner dude!!
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Love it! any pics of the wood platform, specifically how you assembled it?
Quote from: jeffrackmo on December 03, 2016, 04:49:16 PM
Still need a few parts but should be funtional. Need the Weber badge for the front panel and a plug insert for the handle. The clamps I picked up were a bit too big. Took those back today She sits pretty stable. I may not use clamps... eh... who knows.
You may already know this, but Ace Hardware carries the square tube plug inserts.
Thanks for the reminder @haeffb! Will hit that tomorrow...
Quote from: captjoe06 on December 04, 2016, 12:47:22 AM
Love it! any pics of the wood platform, specifically how you assembled it?
No pics unfortunately of the build. It was rather simple once i wrapped my head aroud what i needed to do.
3 - 6 foot of Cedar 1x6 fence stock dog ear boards.
6 - self tapping SS screws to mount the shelf to the frame. (The lower supports and wire rack were mia when i picked up the ssp.)
A generous handful of exterior grade screws.
Cut all of the fence stock to 48 inches.
Cut 2 of the remaining pieces to 18 inches.
Used 2 of the remaining pieces of stock to shore up the shelf. Squared up the shelf to be 18 inches wide with compression clamps and fastened the 2 pieces to all three lengths of the shelf.
Centered the shelf on the supports, Squared up and ran the self tappers into the shelf supports on the frame front and rear.
I woke up all kinds of excited to get this done on Saturday am... therefore no pics of the build. Just the finished project.
(http://uploads.tapatalk-cdn.com/20161205/63e3d6d0b4cac4204519f6dfd534a7c5.jpg)
(http://uploads.tapatalk-cdn.com/20161205/36406a2a284f9e9376f86b5e0ad8ca28.jpg)
(http://uploads.tapatalk-cdn.com/20161205/565bd33f3e8e77bce3517637f1863ec1.jpg)
Still some work to do and parts to get. But it was fun just the same. All in , i am in for this project at 20 for the ssp, 9.55 for.the shelf parts. Sold the ssp red bowl and lid and now i am in for a whopping total of.... $4.55. Fun project and frugal build. AND got to meet another local grill fella! Pretty productive weekend i'd say...
AND spun up an amazing bird as well!@
Looks great. Functional and good looking. Good job!