I'm just now getting around to posting shots of a 22.5 MBH B Code that I cleaned up. It's a CL find that was about an hour away and only a few pennies. Unfortunately (or fortunately), no fascinating story or complicated restore with this one. It's just a 35 year old kettle that needed some TLC.
Shot from the CL ad. Gentleman didn't realize that "old Webers could be collectible." For his own sake, I didn't go into a long explanation about this place.
(http://pics.weberkettleclub.com/images/2015/10/08/00t0t_hbZbzTYipCR_600x450.md.jpg)
Some before shots. The main issues were that it was caked with past cooks on the inside, the bottom 3 daisy wheels were a bit out of shape, and a slight, even fade to fugrayzzi. Other than that, the grill was well cared for and had all it's parts. It needed more elbow grease than anything else. I forgot to put the ash pan on for both before and after shots, but the original came with the grill. It's the bent edge style.
(http://pics.weberkettleclub.com/images/2015/10/08/20150918_144114.md.jpg)
(http://pics.weberkettleclub.com/images/2015/10/08/20150918_144144.md.jpg)
(http://pics.weberkettleclub.com/images/2015/10/08/20150918_144207.md.jpg)
(http://pics.weberkettleclub.com/images/2015/10/08/20150918_144402.md.jpg)
(http://pics.weberkettleclub.com/images/2015/10/08/20150918_144324.md.jpg)
And the after shots. A small sliver has rusted through in the area of the leg socket welds. There was also a bit more rim rash (than anticipated) on the lid after cleaning it up. The handle wasn't cracked and still held tight so I decided to just clean it up and refinish it (sorry Brian,
@zavod44 .) I went with a semi-gloss SPAR varnish on top of tung oil that came out shinier than I would have liked, but I'm fine with it.
(http://pics.weberkettleclub.com/images/2015/10/08/20151007_175742.md.jpg) (http://pics.weberkettleclub.com/image/95)
(http://pics.weberkettleclub.com/images/2015/10/08/20151007_175723.md.jpg) (http://pics.weberkettleclub.com/image/91)
(http://pics.weberkettleclub.com/images/2015/10/08/20151007_175659.md.jpg) (http://pics.weberkettleclub.com/image/94)
(http://pics.weberkettleclub.com/images/2015/10/08/20151007_175757.md.jpg) (http://pics.weberkettleclub.com/image/9J)
The after shots were done in the shade so the bowl appears darker than the before shots. It is still the same speckled fugrayzzi I picked up, I didn't use the Pam trick. I also forgot an after shot of the bottom daisy wheels, but they came clean as well. The grates were also in OK shape, I just didn't put them back in yet. I may get a Craycort or MT setup for this kettle but I'm still on the fence. It's nothing fancy or rare, but it was a good candidate to "restore" since I wouldn't be too upset if I muffed it up.
You did a nice job there. Great cookers for low'n'slow. Enjoy!
No apologies, that looks great, really nice work.....kudos
great work!
Thanks for the kind words, fellas.
Quote from: MacEggs on October 08, 2015, 11:06:17 AM
You did a nice job there. Great cookers for low'n'slow. Enjoy!
I planned on using it for low and slow, something I hope to do more often.
Looks great to me
Sweet!!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Great find and clean up!
Cleaned up real good, it looks great I love the orange peel look!
Good looking B code! That original handle looks pretty sweet! I've got a couple kettles (A, B, and C code) that still have the original handles that have held up well.
Good work Santo! That handle came out great.
I've found that kettles of that particular color and that particular era can "take it" !!! I use mine for pizza, ribs, Roti-chicken, you name it ... it's my dedicated Roti cooker and Pizza oven :) You did a great cleanup 8) SJ
Fugrayzzi!
Love that!
Again, thanks for the kind words!
Quote from: 1911Ron on October 08, 2015, 05:41:41 PM
Cleaned up real good, it looks great I love the orange peel look!
Thank you, I'm a big fan of the orange peel look as well. It's so even it almost looks like it was by design. It's technically still black, but the fade and peel make it just a bit more interesting.
Quote from: Craig on October 08, 2015, 07:06:35 PM
Good looking B code! That original handle looks pretty sweet! I've got a couple kettles (A, B, and C code) that still have the original handles that have held up well.
I was drawn to it by the MBH, but the condition of the handle sold me. My thought is that if I cleaned it up now, it will hopefully last another 35 years.
Any photos of the A code? Did they have a small damper vent tab and metal wheels?
Quote from: SmokenJoe on October 08, 2015, 10:15:52 PM
I've found that kettles of that particular color and that particular era can "take it" !!! I use mine for pizza, ribs, Roti-chicken, you name it ... it's my dedicated Roti cooker and Pizza oven :) You did a great cleanup 8) SJ
I recall reading similar sentiments from others, so I figured this would be a worthy addition to my small collection. The B code will get the nod for next pizza cook.
Quote from: swamprb on October 09, 2015, 02:36:50 AM
Fugrayzzi!
Love that!
Thanks, I may have to trademark that one
Great job Santo! It really came back to life with the handle refresh and interior cleanup! Congrats!
Much appreciated fellas, I'll be sure to throw some shots of the inaugural cook when I get to it. Thanks again.
Beautiful job. Did you just wash the handle or sand or a combination? Please share. The finished product is awesome and I would like to do something similar on my most recent score.
Quote from: jkolantern on October 12, 2015, 06:17:16 PM
Beautiful job. Did you just wash the handle or sand or a combination? Please share. The finished product is awesome and I would like to do something similar on my most recent score.
Sorry for the delay, didn't realize there was more replies. I did not wash the handle to start. There was no grease or dirt on it, just the old, weathered wood. I started sanding with 220 grit (only 1 pass), then worked up to 1000. Three coats of tung oil followed with three coats of semi gloss spar varnish after the tung oil. In between spar coats, I wet sanded with 1000 grit (which probably wasn't necessary, but the final product is super smooth). If I were to refinish an original handle again, I would consider drilling out the original rivets to refinish the undersides of the wood and get new hardware in there. It would provide that little extra piece of mind knowing that the ENTIRE handle has been refinished.