Anyone do a mod for bottom vents?

[Merkong]

Tired of bending down to see status of my bottom vents. My Happy Cookers have 3 on the bottom.

Anyone make orientation markings and/or add a vent knob to them.

Yes, I thought of this after seeing the vent knob thread...

Tired of bending down to check bottom vents... Am I missing something.

ken


Sent from my iPhone using Weber Kettle Club mobile app

[MacEggs]

Tired of bending down to see status of my bottom vents. My Happy Cookers have 3 on the bottom.
Tired of bending down to check bottom vents... Am I missing something.

ken

One word comes to mind : ....   Lazy .... Get it done .... Report back ... 

[Mike in Roseville]

Merkong,

May I suggest get a OT kettle and mark the shroud (in relation to the OT handle) with a sharpie. Never think that much about bottom position vents again. Done!

Mike

[Merkong]

Tired of bending down to see status of my bottom vents. My Happy Cookers have 3 on the bottom.
Tired of bending down to check bottom vents... Am I missing something.

ken

One word comes to mind : ....   Lazy .... Get it done .... Report back ... 

Not as much lazy as old...

Will do.


Sent from my iPhone using Weber Kettle Club mobile app

[Merkong]

Merkong,

May I suggest get a OT kettle and mark the shroud (in relation to the OT handle) with a sharpie. Never think that much about bottom position vents again. Done!

Mike

I think I'll try something like that on my two OT kettles. Maybe an etching or something...

My Happy Cooker (soon to be two Happy Cookers) have 3 vents. I'm going to add knobs and try an orientation mark... Again, maybe an etching.

My Structo and John Deere (both likely made by the Thermos Corp. in the late 60's) have one bottom vent but I still might try to minimize stooping due to old age (lmao, I mean laziness).

Will post progress.


Sent from my iPhone using Weber Kettle Club mobile app

[Skinsfan1311]

Sharpie

Sent from my SM-G900V using Weber Kettle Club mobile app