Performer disassembly tool kit

[OoPEZoO]

Can anyone give me a quick run down of what someone would want to take with them to disassemble a newer style performer?  I know the bowl tabs are held down by Philips screws, but I wasn't sure about the table top or anything underneath regarding the frame rails. Are there and torx/Allen heads or anything else goofy I should know about?

[bthorn9435]

1- Phillips Screwdriver
1- Flathead Screwdriver


That's all you need, the flathead is to pop the gas orifice clip off. Everything
else is a phillips. Should take you less than 10 minutes, any longer and I
would start to question your love of the Weber Grill!!!! 

[pbe gummi bear]

Weber performer manual pg 6: http://c929377.r77.cf2.rackcdn.com/54788_072012.pdf shows a philips screwdriver (#2 and #3 should do but the igniter is  held onto the tube with a #1 though), wrench (likely 7/16" for the 1/4-20 hardware), hammer and block of wood for assembly so that's likely all you'll need for disassembly.

[OoPEZoO]

Excellent. Thank you gents. Hopefully picking one up Saturday morning. It needs a little TLC, but looks to be solid and all there per the current owner. If all goes well, it's going to be cleaned up and gifted to a buddy to help spread the Weberitus.

[1911Ron]

Excellent. Thank you gents. Hopefully picking one up Saturday morning. It needs a little TLC, but looks to be solid and all there per the current owner. If all goes well, it's going to be cleaned up and gifted to a buddy to help spread the Weberitus.

Good job passing on the love!

[Fishawn]

Done a few.... Battery powered drill/screwdriver with a Phillips bit is handy

[bthorn9435]

No power tools, to honor the majesty of the Weber you have to do it old school! By Hand!!

[pbe gummi bear]

No power tools, to honor the majesty of the Weber you have to do it old school! By Hand!!

You should see how fast I can disassemble an SS performer with a 7/16" socket on a drill and a philips/flathead screwdriver. 

[OoPEZoO]

Scratch that plan.  I was going to disassemble it to fit in my beater Corolla, but an SS popped up too close to pass up. Looks like I'm taking the truck and bringing home a pair of performers.  Hell of a week for grill acquisitions 

Gonna have to take some pics and change my status on that "how many grills you own" pole before the end of the weekend.

[1buckie]

No power tools, to honor the majesty of the Weber you have to do it old school! By Hand!!

You should see how fast I can disassemble an SS performer with a 7/16" socket on a drill and a philips/flathead screwdriver. 

^^^^ Do not doubt this, folks.....I've seen how fast he moves with a camera, other machinery can't be that far behind.....................

Scratch that plan.  I was going to disassemble it to fit in my beater Corolla, but an SS popped up too close to pass up. Looks like I'm taking the truck and bringing home a pair of performers.  Hell of a week for grill acquisitions 

Gonna have to take some pics and change my status on that "how many grills you own" pole before the end of the weekend.

Let's hear it for TRUCKS, instead of compact cars !!!!


Good Show !!!!