Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Mod a 22" kettle or .......gasp, go pellet.  (Read 2897 times)

mjacxx

  • Happy Cooker
  • Posts: 7
Mod a 22" kettle or .......gasp, go pellet.
« on: July 19, 2020, 08:45:26 AM »
A decision I have been debating. I have had mediocre temp control success while smoking on a kettle. I am considering investing in a fan and atc controller to perhaps solve temp control problems. However I could, almost, spend the same and have a small pellet rig.
I rv a lot but have space for both a grill and a separate small smoker. Weight and power isn't an issue either. Just cooking for two.
Thoughts?

Sent from my moto g(6) using Tapatalk


michaelmilitello

  • WKC Performer
  • Posts: 3802
Re: Mod a 22" kettle or .......gasp, go pellet.
« Reply #1 on: July 19, 2020, 02:50:32 PM »
Can you describe your temp control issues and how you set up your kettle?


Sent from my iPhone using Tapatalk

mjacxx

  • Happy Cooker
  • Posts: 7
Re: Mod a 22" kettle or .......gasp, go pellet.
« Reply #2 on: July 19, 2020, 06:36:32 PM »
I close the lower intake vent half way. The upper vent is open 1/8 to 1/4.
I have married two Weber baskets together, fill add wood and light with 10-12 fully lit charcoal. I also have fire bricks next to the baskets, from side to side. The remaining area is foiled.
The upper vent/lid is placed on the side opposite the charcoal.
All adjustments are attempted with  the lower vent.
I see temp swings of 40-50 degrees and can't seem to get it to stay at any temp for longer than one hour.

Sent from my moto g(6) using Tapatalk


michaelmilitello

  • WKC Performer
  • Posts: 3802
Re: Mod a 22" kettle or .......gasp, go pellet.
« Reply #3 on: July 19, 2020, 06:54:19 PM »
Thanks. How do you measure temps?


Sent from my iPhone using Tapatalk

mjacxx

  • Happy Cooker
  • Posts: 7
Re: Mod a 22" kettle or .......gasp, go pellet.
« Reply #4 on: July 19, 2020, 06:58:56 PM »
ThermPro. I forgot the model. 2 probes.

Sent from my moto g(6) using Tapatalk


michaelmilitello

  • WKC Performer
  • Posts: 3802
Re: Mod a 22" kettle or .......gasp, go pellet.
« Reply #5 on: July 19, 2020, 07:36:32 PM »
Well, that’s a head scratcher.   What you described should give you steady temps.  I would probably try a slightly different vent approach.  I do 1/4 open bottom and top wide open.

Does your lid sit properly?   Is the lid or bowl out of round?

Have you tried the snake method?


Sent from my iPhone using Tapatalk

mjacxx

  • Happy Cooker
  • Posts: 7
Re: Mod a 22" kettle or .......gasp, go pellet.
« Reply #6 on: July 20, 2020, 03:53:16 AM »
Thanks. I will try your suggestions. I haven't tried the snake as I thought it was for much longer smokes than those I have attempted.

I have some free time so I'll do some tests. 1) your vent settings. 2) the snake. 3) fewer lit charcoal to start.

I will get a very slight wisp of smoke at the lid occasionally but a slight movement will fix it. Otherwise the lid is good.

I assume your not a fan, pun intended, of an atc and fan?

Thanks again.

michaelmilitello

  • WKC Performer
  • Posts: 3802
Mod a 22" kettle or .......gasp, go pellet.
« Reply #7 on: July 20, 2020, 05:26:35 AM »
Snakes are fine for shorter cooks too.   

Your technique is sound and I think you may have some analysis paralysis on your temps.   No disrespect intended.  Despite the temps, are you pleased with what you’re producing bbq-wise?

Personally, I’m not interested in Atcs but I have no issue with them.  I’d rather spend money on quality meat.  I can live with 225-275 for my low n slow cooks.   My bbq turns out fine and I’m happy with the results.   I do overnight cooks for brisket and pork butts and set my maverick to alarm at 210 and 290.   It’s rare that I need to adjust unless it’s windy or raining.  The fluctuation really has little impact except things might cook slightly faster or slower.   

I would worry more about the temperature of your beverage [emoji481].  [emoji3]. 

Btw, I had a Traiger and saw temp fluctuations with it too.  Pellets won’t solve the issue completely, especially if you are comparing the thermostat to another probe thermometer.  It’ll drive you nuts.


Sent from my iPhone using Tapatalk
« Last Edit: July 20, 2020, 05:35:05 AM by michaelmilitello »

mjacxx

  • Happy Cooker
  • Posts: 7
Re: Mod a 22" kettle or .......gasp, go pellet.
« Reply #8 on: July 21, 2020, 10:49:10 AM »
Your snake configuration please.

Sent from my moto g(6) using Tapatalk