Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Ash pan for 26” Flat Top  (Read 1021 times)

cigarman20

  • WKC Ranger
  • Posts: 706
Ash pan for 26” Flat Top
« on: February 14, 2020, 03:14:11 PM »
I’m getting ready to restore the 26” flat top I picked up a while back.

I’m trying to locate the proper ash pan for mid-90’s kettle.

Does Weber still sell them? If so anyone know the part number?


Sent from my iPhone using Weber Kettle Club
Grails- ‘63 Fleetwood, Ambassador

michaelmilitello

  • WKC Performer
  • Posts: 3802
Re: Ash pan for 26” Flat Top
« Reply #1 on: February 14, 2020, 04:12:29 PM »
Unfortunately, they don’t sell them anymore.  I called  Weber customer service last summer and asked.  They only sell the current frisbee style for the 18 and 22.  The 22 pan may be wide enough for the one touch openings.   


Sent from my iPhone using Tapatalk

cigarman20

  • WKC Ranger
  • Posts: 706
Re: Ash pan for 26” Flat Top
« Reply #2 on: February 14, 2020, 05:41:08 PM »
Bummer. Thanks


Sent from my iPhone using Weber Kettle Club
Grails- ‘63 Fleetwood, Ambassador

solidgoldstein

  • WKC Brave
  • Posts: 167
Re: Ash pan for 26” Flat Top
« Reply #3 on: February 14, 2020, 07:18:27 PM »
I just put an ash catcher assembly on mine, as I too had a flat top without an ash pan. They use the same ones as 22” models. I had an extra one from another grill. You can buy them online and have to modify them a bit to mount them (I used metal zip ties under the leg welds and through a circle on the ash catcher assembly collar), or you can just search locally for a used 22” with one, take if off, and then flip the kettle w/o an ash pan for a few bucks. Think it looks great, and works well too. Another option would be one of the twist on reproduction pans Jeff and Bertl have made before. Good luck with your search!


Sent from my iPhone using Weber Kettle Club

RRRanger99

  • WKC Performer
  • Posts: 2061
Re: Ash pan for 26” Flat Top
« Reply #4 on: February 14, 2020, 08:08:13 PM »
...Or, you can order an uncut 26" reproduction ash pan from @Jeff & @Bertl, on the next production run.

http://weberkettleclub.com/forums/index.php?topic=31834.75

Bertl

  • WKC Ranger
  • Posts: 837
Re: Ash pan for 26” Flat Top
« Reply #5 on: February 14, 2020, 09:03:52 PM »
A bunch is at the moment on the way to US

Sent from my SM-G950F using Weber Kettle Club mobile app


Jeff

  • WKC Performer
  • Posts: 4839
Re: Ash pan for 26” Flat Top
« Reply #6 on: February 15, 2020, 03:10:28 AM »
I will make a post on here when I receive the pans from @bertl

Sent from my SM-G930V using Weber Kettle Club mobile app

Kettle collector AND cooker!

Cellar2ful

  • Moderator
  • Posts: 3629
Re: Ash pan for 26” Flat Top
« Reply #7 on: February 15, 2020, 07:04:34 AM »
A bunch is at the moment on the way to US

I will make a post on here when I receive the pans from @Bertl

I'm sure a lot of uncompensated time and effort goes into procuring, packaging and shipping of these pans.  Several of my looker kettles proudly wear one of your reproduction ash pans.  In fact, my Chariot Seville would not have an uncut ash pan if it were not for your efforts.  Thanks for collaborating on this again.

"Chasing Classic Kettles"

Bertl

  • WKC Ranger
  • Posts: 837
Re: Ash pan for 26” Flat Top
« Reply #8 on: February 15, 2020, 07:28:56 AM »
Thanks for your kind words Jim!
A bunch is at the moment on the way to US

I will make a post on here when I receive the pans from @Bertl

I'm sure a lot of uncompensated time and effort goes into procuring, packaging and shipping of these pans.  Several of my looker kettles proudly wear one of your reproduction ash pans.  In fact, my Chariot Seville would not have an uncut ash pan if it were not for your efforts.  Thanks for collaborating on this again.

Sent from my SM-G950F using Weber Kettle Club mobile app


solidgoldstein

  • WKC Brave
  • Posts: 167
Re: Ash pan for 26” Flat Top
« Reply #9 on: February 15, 2020, 09:46:07 AM »

A bunch is at the moment on the way to US

I will make a post on here when I receive the pans from @Bertl

I'm sure a lot of uncompensated time and effort goes into procuring, packaging and shipping of these pans.  Several of my looker kettles proudly wear one of your reproduction ash pans.  In fact, my Chariot Seville would not have an uncut ash pan if it were not for your efforts.  Thanks for collaborating on this again.

+1 Jeff and Bertl all both great dudes. I got a 26” twist last year and it’s awesome! Thanks for the hard work, gents!


Sent from my iPhone using Weber Kettle Club