Mini mod measurements for the 22in

[inkaddictedchef1]

I am in motion of making minis of a few kettles both 18 and 22in i have the specs in the 18 in mod, can soneone please share the info on a 22in mod. Thanks

Sent from my SM-G955U using Weber Kettle Club mobile app

[Shoestringshop]

X2!

[Mr.CPHo]

@inkaddictedchef1
@shoestringshop

I'm not sure if you guys are using single or double 6" or 8" wheels; mine use 8" dualies.

The front leg measured 13.0", the back legs measured 10.0".  Play it safe and simply cut off the same amount from THE TOP of each leg for consistency and to avoid that "gangsta lean".

The axle width measured 22" which makes sense. 

If using 8" wheels, you'll also have to drill another hole in the front leg an inch above the existing hole. 

Installing the ash ring and bucket is doable, but getting the bucket off and on is tight; once disengaged from the ring, I have to slide the bucket in and out from the backside.

Reach out with any questions.


Sent from my iPhone using Weber Kettle Club

[inkaddictedchef1]

Thank you! Mods coming soon! Here's my 18 i did earlier today... my boys approved.  today

Sent from my SM-G955U using Weber Kettle Club mobile app

[Speedster]

Sent from my iPhone using Weber Kettle Club mobile app

[inkaddictedchef1]

Sent from my SM-G955U using Weber Kettle Club mobile app