Specs on various gassers.

[jacko1962]

Happy Friday to all,

Looking for some inside dimensions on various gasser frames. So far the weber silver a and b are to small for what I need. My project is to salvage an old frame and mount my 18 inch charcoal inside the frame. I then want to use a product like this. https://www.homedepot.com/p/MSI-Giallo-Fantasia-18-in-x-31-in-Polished-Granite-Floor-and-Wall-Tile-7-75-sq-ft-case-TGCGIAFAN1831/202194697?MERCH=REC-_-PIPHorizontal2_rr-_-202194688-_-202194697-_-N to but up to the mounted charcoal grill giving me a nice work surface and an 18 inch homemade "Performer".

Thanks,
Jack

[56MPG]

Even the big Gennies are too narrow for an 18. Center to center between the rails on the Gennie are 16 3/4". You need 19 3/8" for a 18.5 kettle, unless you want it sitting sky high. Couple ways to do it though, here's one way:

http://weberkettleclub.com/forums/weber-kettles-accessories/mod-month-half-baked-wsm-cart/msg245957/#msg245957
A Smokey Joe however...
[/url]

[jacko1962]

@56MPG . I like the first one. What frame was it?

[jacko1962]

@56MPG . Sorry found the info from the link.

[jacko1962]

@56MPG . What frame was your mockup from? I really like it. Little jb weld first then nuts and bolts.

[56MPG]

One of the three-burner models - probably a 1000. They all share the same rail centers, it's the length that varied from model to model.