I think Gen 1 Performers are some of the best kettles Weber has ever produced. Quality materials and a great design. That said, I ditched by charcoal bin a long time ago and got rid of the small propane tank as well. I just don't like the tank hanging down in the front of the kettle. For quite some time now, I have been using lighter cubes with Bisbee - which is kind of lame given the propane starter is one of the performer's best features. Time for a new mod!
I started by ordering the gas regulator, piezo starter, and burner tube for a Gen 3 performer. I wanted the spin on gas bottle feature. To make it work with my Gen 1 performer, and to position the propane bottle in a horizontal position, I had to fabricate some brackets:
(https://dl.dropbox.com/s/cbi2srbbooa1wvc/IMG_1699.jpg?dl=0)
(https://dl.dropbox.com/s/1jk6plr8w5fapar/IMG_1700.jpg?dl=0)
I leave my Slow N Sear in the kettle 90% of the time. For the burner tube, I copied the idea that
@ed3120 and
@pbe gummi bear have pioneered - positioning the ignitor to the right of the mounting bracket. This allows you to focus the flame right under the fuel when using the SNS.
(https://dl.dropbox.com/s/caqmqny9zxd9b12/IMG_1701.jpg?dl=0)
Here you can see the basket I installed where the charcoal bin use to be. Very handy storage. I positioned the regulator so the tank would mount parallel to the basket.
(https://dl.dropbox.com/s/dp20n8lztjiplnl/IMG_1702.jpg?dl=0)
The piezo ignitor mounted nicely next to the regulator. Both the gas adjustment knob and the ignitor button have enough clearance to fit underneath the flip up table when it is closed.
(https://dl.dropbox.com/s/hkd93mdaid6hxmz/IMG_1704.jpg?dl=0)
The tip of the tube sits under the SNS perfectly
(https://dl.dropbox.com/s/ljxjatt9ggyk1n1/IMG_1705.jpg?dl=0)
All rigged up!
(https://dl.dropbox.com/s/uaks21gz5m7lduy/IMG_1706.jpg?dl=0)
Much better - Bisbee now has gas, but no tanks hanging down in front. The basket and new gas system are pretty simple mods, but provide some good functionality. I like the piezo ignitor - it is a nice upgrade over the stock Gen 1 unit.
(https://dl.dropbox.com/s/nvo51a0jnauqspt/IMG_1708.jpg?dl=0)
Winz
Love it!!!
Yeah, I like how you mounted that. Clean look. Good job man!
Sent from my iPad using Tapatalk
That's a really clean GA mod,
@Winz. Nice job!
That looks great, Winz!
@Winz that is something else buddy. I absolutely LOVE the stealth gas mod.
Quote from: Troy on June 11, 2016, 11:42:43 PM
@Winz that is something else buddy. I absolutely LOVE the stealth gas mod.
Thanks Troy - that's what we shall call it: "the stealth gas mod"
Winz
Bisbee looks great like that, super clean!
How bad did Weber nail you for the regulator assembly? I have a SS Performer and one of the twin table OTP's I've been meaning to add new regulators/gas assist to
Quote from: OoPEZoO on June 12, 2016, 04:52:02 AM
How bad did Weber nail you for the regulator assembly? I have a SS Performer and one of the twin table OTP's I've been meaning to add new regulators/gas assist to
I usually buy stuff like this through ereplacement parts instead of Weber. I think it was around $30
Winz
Nice! I'm gonna have to do that to mine. 8)
@Winz do you have the part numbers from ereplacement handy?
@Nate Quote from: Nate on June 12, 2016, 01:37:51 PM
Nice! I'm gonna have to do that to mine. 8)
@Winz do you have the part numbers from ereplacement handy?
Here are the part numbers from my order. I replaced everything (it was time).
1 X Regulator Assembly (74237)
1 X Ignition Module (85681)
1 X Burner Assembly (85683)
1 X Retainer Clip (890415)
Winz
Nice clean look, great job.
My favorite all time grill just keeps getting better.
Bisbee is a constant inspiration
Amazingly clean install. Great job, that grill is definitely an inspiration.
Me Likee! It's got me wondering if I could mod my new performer to hide the gas bottle!
Man that mounting of the propane tank is nice. I didnt think it could be done sideways....now you have me thinking.
Quote from: Winz on June 11, 2016, 05:22:35 PM
I leave my Slow N Sear in the kettle 90% of the time. For the burner tube, I copied the idea that @ed3120 and @pbe gummi bear have pioneered - positioning the ignitor to the right of the mounting bracket. This allows you to focus the flame right under the fuel when using the SNS.
(https://dl.dropbox.com/s/caqmqny9zxd9b12/IMG_1701.jpg?dl=0)
Winz
I've done similar, but with a twist. I rotate the burner tube 180 so the igniter is mounted up rather than down. I think it protects the igniter better and also allows the wires to be dressed nicer and out of the way.
http://weberkettleclub.com/forums/weber-kettles-accessories/ssp-burner-any-reason-not-to-do-this/msg226862/#msg226862 (http://weberkettleclub.com/forums/weber-kettles-accessories/ssp-burner-any-reason-not-to-do-this/msg226862/#msg226862)
Clean and classy !
Sent from my iPhone using Tapatalk
Love it! I think I might do these mods to my new performer. Thanks!
So, are there any issues with mounting the propane tank sideways??? I though there would be which is why i didnt do it that way in the first place.
You think if there isnt, then Weber wouldve mounted them like this from the beginning
Finally did this mod!!
Thanks
@Winz. Now onto the sliders.
Very nice work!!
I need to replace the burner tube on my latest SSP acquisition. Its an EE Code red head. Is that the same burner tube from a new Gen of the performer?
I gotsta git me one o' them!!! The old one works but is quite rusty and the flame is a lazy yellow rather than Blue like my Black SSP....
Nice Mod!!!
The burner tube is the same for all gas-assist Performers. The regulator for the SSP is different than the Gen2 and all later Performers (which are all interchangeable, I believe.)
Quote from: haeffb on October 12, 2016, 02:53:16 PM
The burner tube is the same for all gas-assist Performers. The regulator for the SSP is different than the Gen2 and all later Performers (which are all interchangeable, I believe.)
Thank @haeffb. I did order a new one from ereplacement. The regulator is good. Just the tube is all wonky... didnt mean to hijack... and now back your regularly scheduled discussion...