Yellow has a soft handle

[Vwbuggin64]

So a while back i picked up a MBH yellow. However, the front handle is pretty soft, meaning it feels like it wants to break off. Anyone have any tips on how to strengthen it?


Sent from my iPhone using Weber Kettle Club

[Cellar2ful]

Drilling a small hole in the tab of each side of the handle, then  securing with very small stainless steel bolt, nut and washer works. I have used this method to secure handles that have broken off and ones that feel soft as you describe.  I usually remove all the rust possible using #0000 steel wool. Once completed the small bolt head is barely visible on the outside.

[Vwbuggin64]

Drilling a small hole in the tab of each side of the handle, then  securing with very small stainless steel bolt, nut and washer works. I have used this method to secure handles that have broken off and ones that feel soft as you describe.  I usually remove all the rust possible using #0000 steel wool. Once completed the small bolt head is barely visible on the outside.

Thanks for the tip Cellar. ill look for a small bolt and go from there. I apprecaite it.

[Chesapeake Weber]

If you have a Tractor Supply company near by, they have a good selection of nuts, bolts, etc


Sent from my iPhone using Weber Kettle Club

[Cellar2ful]

Here is an example of the size bolts I use. Although the photos are from a lid handle, I have used the same repair method to reattach mbh’s.