First restoration

[damienroux]

Hello, I will start my first restoration. how to proceed for this bowl ?

Is It possible to stop the rust progression ?

Thank you son much




Sent from my Redmi Note 8T using Weber Kettle Club mobile app

[michaelmilitello]

Hello.  Nice brownie.  Check this article out. 

http://weberkettleclub.com/weber-grill-restoration-interior-and-exterior-kettle-cleaning/

As for the rust, I usually apply some oil to it with a cotton swab or cotton ball.  It'll season like cast iron.   If it's too close to the heat, you may need to reapply periodically.  I would not apply paint to the interior of the bowl.  Try to use foil pans to catch grease. 


Sent from my iPhone using Tapatalk

[Filibuster]

   If you're hardcore you can resort to navel jelly, my two outriders needed the navel jelly treatment. Took about two weeks per because the bowl has to be tilted to keep the product on that spot, inside then outside. Be careful because if the rust has worked it's way thru the navel jelly will clean it out then you will have a hole there, had this happen to the second outrider. The end result is rust free and nothing to worry about.

Sent from my SM-J700P using Weber Kettle Club mobile app

[Darko]

Spray some Pam on it and cook away!

[damienroux]

Thank you

Hello.  Nice brownie.  Check this article out. 

http://weberkettleclub.com/weber-grill-restoration-interior-and-exterior-kettle-cleaning/

As for the rust, I usually apply some oil to it with a cotton swab or cotton ball.  It'll season like cast iron.   If it's too close to the heat, you may need to reapply periodically.  I would not apply paint to the interior of the bowl.  Try to use foil pans to catch grease. 


Sent from my iPhone using Tapatalk

Sent from my Redmi Note 8T using Weber Kettle Club mobile app