News:

SMF - Just Installed!

Main Menu

Welp

Started by wildeagle, February 21, 2020, 05:12:09 PM

Previous topic - Next topic

wildeagle

Its stuck , last night maintenance burned . Went the 500 then back to this.
Ryan  Andrew Moore

bamakettles

You can get a weber replacement or a custom from amazon for less than $20.  Check out T-Roy cooks on YouTube or Phil in Florence.  Both replaced theirs.


Sent from my iPad using Weber Kettle Club

jcnaz

I think that Tel-Tru and River Country both make thermometers that will work in that bezel.
They will probably be more accurate, too.
A bunch of black kettles
-JC

rc

If your the original owner and still within the 10 year warranty, contact Weber for a replacement. Even if your not the original owner I'd still contact Weber. They might send you a new one.


Sent from my iPhone using Weber Kettle Club

SteveZ

Maintenance Burn to 500?
SSP Caribique, Black 2nd Generation Performer, 2018 Green Performer, 1970 MBH 26 Black (Fleetwood) with Roti, 1965 Thumb Screw 49er, (2) Black 18 OTG, 2017 Black Master Touch, Black Genesis Silver B.  E code 14 WSM, AH code 18 WSM, AH code 22 WSM,

WNC

Mine has done that too
It was fine for years, but then one day it sat in and around the same position.
It's still pretty accurate when it get hot though


Sent from my iPhone using Weber Kettle Club

Mr.CPHo

#6
I swapped in a Genesis thermometer (P/N 67088 ) which has a much higher temp range than the stock thermometer.  Fits perfectly in the existing bezel. 

https://www.grillparts.com/weber/weber-grill-parts.asp?src=base&product_id=67088%20&utm_source=google&utm_medium=cpc&utm_campaign=shopping&gclid=EAIaIQobChMIgpjckKX04gIVFcpkCh0xBA3SEAQYASABEgIiAvD_BwE

wildeagle

So I made a fire, I had originally only the bottom piece lit I'm going for a bit.  Then I put it all together, and watched it get what ever it was. I closed vents at that point and let it come back down after a while. No water pan or grates. Only about 1/3 bag of regular charcoal briquettes.
Quote from: SteveZ on February 22, 2020, 04:51:22 AM
Maintenance Burn to 500?
Ryan  Andrew Moore

wildeagle

I just got it from a dude going through a bad divorce more than half off   . it's less than two years old
Quote from: rc on February 21, 2020, 06:44:25 PM
If your the original owner and still within the 10 year warranty, contact Weber for a replacement. Even if your not the original owner I'd still contact Weber. They might send you a new one.


Sent from my iPhone using Weber Kettle Club
Ryan  Andrew Moore

rc


Quote from: wildeagle on February 22, 2020, 11:20:41 AM
I just got it from a dude going through a bad divorce more than half off   . it's less than two years old
Quote from: rc on February 21, 2020, 06:44:25 PM
If your the original owner and still within the 10 year warranty, contact Weber for a replacement. Even if your not the original owner I'd still contact Weber. They might send you a new one.


Sent from my iPhone using Weber Kettle Club
It's still under warranty. Contact Weber and get a replacement. They may ask you for the serial number found on the lids vent cover to validate its age.


Sent from my iPhone using Weber Kettle Club

wildeagle

Weber didn't care Weber didn't ask, new one is in the mail
Quote from: wildeagle on February 21, 2020, 05:12:09 PM
Its stuck , last night maintenance burned . Went the 500 then back to this.
Ryan  Andrew Moore