News:

SMF - Just Installed!

Main Menu

Propane knowledge needed

Started by GrillGuyMosier, February 16, 2018, 12:16:00 PM

Previous topic - Next topic

GrillGuyMosier

Any reason a performer burner tube would allow the flame to be contained before the crimped area? It looks clean inside tube. I have scraped and blew it out.  It doesn't do it every time. Sometimes no flame will come out the end, it stays trapped between the crimped area and the hose and also makes a gurgling sound.

Sent from my SM-G930V using Weber Kettle Club mobile app



[attachment deleted by admin]
Text @ 419-619-6379

randy

Hate to ask but is the tank full?


Sent from my iPhone using Weber Kettle Club

kettlebb

Usually a pressure/regulator issue if the Venturi is clean


Sent from my iPhone using Tapatalk
Looking for: Red MBH 26"(The Aristocrat), Chestnut-coppertone (The Estate), Glen-blue (The Imperial), and The Plainsman.

Heyjude

I don't care if you don't like my Avatar, its there for me..

GrillGuyMosier

Yes the tank if full lol
I did clean the orfice out and i switched things around from my different performers.
i am also thinking its a bad regulator, not enough pressure.
guess its time to update the SSP with a 1 pound regulator
Text @ 419-619-6379

Hell Fire Grill

Bugs and ashes get in the burner tube and that can congest the flow. Try blowing water through the tube with the orifice & hose removed.

I had to put a carburetor on one of mine.



You can't always get what you want....but if you try sometimes you get what you need