News:

SMF - Just Installed!

Main Menu

Performer Deluxe Propane Question

Started by neocacher, February 07, 2018, 07:06:43 AM

Previous topic - Next topic

jaynik

It normally only takes a couple minutes with the flame on.  In cold weather, I've left it on maybe up to 5 minutes.  During the summer, it's only a minute or two.

Quote from: Firemunkee on February 08, 2018, 07:26:59 PM
Quote from: jaynik on February 08, 2018, 04:06:03 PM
I can get quite a few cooks out of the 1lb canisters.  For my space, another 20lb tank would be clunky and crowded.  I do have a 5lb can that came with the SSP I got.  I was able to get it recertified at the propane shop nearby for $5.  Since you just got it, try the 1lb tanks and see if you need to get a bigger tank.

FWIW, I use the propane start on my performers with a chimney.  No newspaper.  Just put the chimney over the flame then you can spread the coals how you want them.  Takes a couple minutes to light.
How long do you leave the flame on while you have the chimney over it?

Sent from my Nexus 5X using Weber Kettle Club mobile app

Firemunkee

Quote from: jaynik on February 09, 2018, 01:50:19 AM
It normally only takes a couple minutes with the flame on.  In cold weather, I've left it on maybe up to 5 minutes.  During the summer, it's only a minute or two.

Thanks!

Sent from my Nexus 5X using Weber Kettle Club mobile app

Together we'll fight the long defeat.

Firemunkee

Quote from: jaynik on February 09, 2018, 01:50:19 AM
It normally only takes a couple minutes with the flame on.  In cold weather, I've left it on maybe up to 5 minutes.  During the summer, it's only a minute or two.

I just tried this for lighting just 12 briquettes for low and slow and it worked great! Thanks for the tip!
Together we'll fight the long defeat.