Does anyone own the Cajun Bandit 22.5 charcoal ring? If so, how is it different from the stock Weber 22.5 charcoal ring? Is it taller? Does it hold more charcoal than the Weber ring?
Here is the High Flow Expanded ring out of the box.
The charcoal grate fits inside the ring and rests on tabs. It was originally designed for the Gen1 22" WSM that had the intake vents at the c/grate level which caused the vents to clog at times on long cooks.
Those of us that figured out the Weber design flaw, modded the grate holder bolts to raise the grate above the vents.
While the Cajun Bandit ring does not look that much larger than the stock ring, it does hold more fuel than the original. I wired the grate in place to make ash disposal easier.
This is the ring filled with a 21.6 lb. bag of KBB.
So in theory, if you were to start the bullet with the traditional Minion Method, you would be removing @ 50 briqs and starting them in a chimney and spreading them on the unlit coals.
But firing a full ring off with a torch (what Jim Minion uses) you can get 3-5 more hours of burn time. Figuring a full chimney of briqs weighs @ 5 lbs. YMMV
I always thought the only difference was that it's stainless. Not sure though.
Yes it is Stainless Steel
I was wondering the same thing about the ring for the 18wsm. I sent them an email months ago asking that very question. Either they did not respond or I missed the response.
I'v only used the High Flow charcoal ring for the 22" WSM, but the rings that I have for my 18" & 22" Cajun Bandit Kettle Conversion and Stackers do not have the riser.
good question
Here is a little FB Group for all things Cajun Bandit:https://www.facebook.com/groups/374475039413561/
Hopes this clears things up?