Has any one attempted to make their own slow and sear?

[kingforce]

If so can you post some pics. I'm a lil curious to see how it came out?


Sent from my iPhone using Weber Kettle Club

[randy]

Sent from my iPad using Weber Kettle Club

[kingforce]

Sent from my iPad using Weber Kettle Club

That's looks awesome what where your measurements and how did it fit in your grill?



Sent from my iPhone using Weber Kettle Club

[WMT]

 I also made one. Its in the link below. Unfortumately because of photobuckets 3rd party hosting rules, the pictures are not there anymore. I will try to find them on my computer and get then for you, but it is prety much the same as Randy's. I just took some measurements from the kettle and inserted them into an online cone calculator, made a template, transfered the template to the stainless sheet, cut it out with my angle grinder and welded it up. I made it with the water resovoir also but I never use it. The temps stay rock steady on my master touch. I have done piles of cooks with it and havent needed to use the resovoir at all. In my opinion it's a waste of time building the resovoir, but thats just my opinion.  Its the best thing I have made for grilling. It's definately not the poor mans version that I mentioned in the first post in the link. It's more of a heavey duty version and will outlast me and my kettle.
Like I said, there are no images in the link but I go through the testing of it in the link below.
http://weberkettleclub.com/forums/weber-kettles-accessories/happy-at-last/msg291150/#msg291150

Heres the cone calculator I used
http://craig-russell.co.uk/demos/cone_calculator/

[kingforce]

I also made one. Its in the link below. Unfortumately because of photobuckets 3rd party hosting rules, the pictures are not there anymore. I will try to find them on my computer and get then for you, but it is prety much the same as Randy's. I just took some measurements from the kettle and inserted them into an online cone calculator, made a template, transfered the template to the stainless sheet, cut it out with my angle grinder and welded it up. I made it with the water resovoir also but I never use it. The temps stay rock steady on my master touch. I have done piles of cooks with it and havent needed to use the resovoir at all. In my opinion it's a waste of time building the resovoir, but thats just my opinion.  Its the best thing I have made for grilling. It's definately not the poor mans version that I mentioned in the first post in the link. It's more of a heavey duty version and will outlast me and my kettle.
Like I said, there are no images in the link but I go through the testing of it in the link below.
http://weberkettleclub.com/forums/weber-kettles-accessories/happy-at-last/msg291150/#msg291150

Heres the cone calculator I used
http://craig-russell.co.uk/demos/cone_calculator/

Thanks for sharing I want to try an make my own. So yeah let me know if u find your old pic it will help a lot


Sent from my iPhone using Weber Kettle Club

[webbr23]

Another good cone calculation site that also creates a template is at http://www.templatemaker.nl/index.php?template=cone&lang=en

Perfect for a Vortex clone plan.

[WMT]

Another good cone calculation site that also creates a template is at http://www.templatemaker.nl/index.php?template=cone&lang=en

Perfect for a Vortex clone plan.

Thats a good one.

[WMT]

Here are the pictures that I promised. Like I mentioned before, It is very similar to Randy's. It is a bit bigger than the actual SnS. Here is the vortex that I built buy cutting the bottom out of a stainless bowl. The credit for the vortex goes to some one on this site but I cant remember who. I just copied it and it works great. cost me $3. Gotta like that.

[attachment deleted by admin]

[WMT]

opps sorry for the double post on the SnS pictures. I'm new to this.

[WildonionAB]

Made mine out of regular steel.  Lol way cheaper than stainless. It's a little wider than adrenalines SnS but works so good!

Sent from my SM-G930W8 using Tapatalk

[kingforce]

Made mine out of regular steel.  Lol way cheaper than stainless. It's a little wider than adrenalines SnS but works so good!

Sent from my SM-G930W8 using Tapatalk

It looks awesome bro and as long as it works that what matters



Sent from my iPhone using Weber Kettle Club