grabbed a firepit off of craigslist; what to do about the handles

[addicted-to-smoke]

I guess its common for these handles to get lost ?

The handles were finished in some kind of bright, almost orange finish or stain but not actually protected very well. And unlike with a grill that might get pulled back in a garage or under the eves when not used, these would get left outside.

I still think it's a neat product; you can walk into any home improvement store today and see fire pits for sale, but Weber's grill reliability didn't transfer over to their fire pit.

[Bubblehead]

You can get a new set here.

https://www.ereplacementparts.com/handle-fireplace-p-1475698.html

Let me know if you need some.  Mine will be much better than the lousy replacement ones Weber sells....

Sent from my XT1650 using Tapatalk

You are absolutely correct.  I picked up a set for a project and the bamboo handles that come with the set are pretty crappy.  I was more posting the link for the metal straps.

[AZ Monsoon]

On the left is what the original handles look like after they've sat outside for a few years (even under a Weber cover in AZ). The stain or whatever was just flaking off.

[Lowbrass]

What kind of/how much sand?  Do those who use it have trouble cleaning and separating it from the ashes when cleaning up after a fire?  Does anyone use a charcoal grate to set the logs on?


Sent from my iPad using Weber Kettle Club

[SixZeroFour]

A charcoal grate works really well - that's what I use at home. Don't use sand in mine, but if I did I would use kids sandbox or "play sand" as it is generally quite clean.

Nice find!

[SixZeroFour]

Oh... and don't do this...

https://www.youtube.com/watch?v=Ib9gXV8Gkjs

[mcgolden]

I would also recommend putting and old 22" cooking grate in the bottom if you have one. It creates good airflow underneath your wood and protects the bottom a bit.


Sent from my iPhone using Weber Kettle Club mobile app

[Lowbrass]

I would also recommend putting and old 22" cooking grate in the bottom if you have one. It creates good airflow underneath your wood and protects the bottom a bit.


Sent from my iPhone using Weber Kettle Club mobile app

As opposed to or in addition to sand?


Sent from my iPad using Weber Kettle Club

[MTW524]

FYI before using the fireplace, put a couple pounds of sand in the bottom.  I have found this will insulate the bottom and help keep the porcelain from cracking and crazing.

I completely agree with recommendation to use sand. Not only will it protect the porcelain, but it will also keep the fireplace from blowing away in a stiff wind.

Agreed. Go to the hardware store and get real play sand too. Regular dirt will rust out the finishes.

Sent from my Pixel using Weber Kettle Club mobile app

[lksdrinker]

A charcoal grate works really well - that's what I use at home. Don't use sand in mine, but if I did I would use kids sandbox or "play sand" as it is generally quite clean.

Nice find!

FYI before using the fireplace, put a couple pounds of sand in the bottom.  I have found this will insulate the bottom and help keep the porcelain from cracking and crazing.

I completely agree with recommendation to use sand. Not only will it protect the porcelain, but it will also keep the fireplace from blowing away in a stiff wind.

Agreed. Go to the hardware store and get real play sand too. Regular dirt will rust out the finishes.

Sent from my Pixel using Weber Kettle Club mobile app

Good call on the charcoal grate!  I had some pool filter sand that I used before lighting my first fire in it this weekend!

[captjoe06]

Just to catch up. Will the nylon reinforced handles work on the firepit? After just one use with brand new wood handles it's obvious they're not going to hold up. 


Sent from my iPad using Weber Kettle Club mobile app

[addicted-to-smoke]

I would think the wood handles would hold up if they are treated/protected. That's the thing with the Fireplace handles. Weber put that weird orange-y finish on them, but not an actual protectant such as polyurethane or even spar varnish.

[pbe gummi bear]

I would think the wood handles would hold up if they are treated/protected. That's the thing with the Fireplace handles. Weber put that weird orange-y finish on them, but not an actual protectant such as polyurethane or even spar varnish.

I think the fireplace handles are also made out of bamboo.

[Bob BQ]

Just to catch up. Will the nylon reinforced handles work on the firepit? After just one use with brand new wood handles it's obvious they're not going to hold up. 

I put taco shells on my fire pit... the wooden handles are holding up great! Would probably do a good job protecting the bulking reinforced handles, as well.