Welcome, Guest

Shop Amazon.com and support the WKC | WKC T-Shirts

Author Topic: Performer Gas Assist Hose Part  (Read 2039 times)

Hogsy

  • WKC Performer
  • Posts: 3649
Performer Gas Assist Hose Part
« on: November 16, 2014, 10:47:48 AM »
I need the little brass nozzle that goes into the burner tube on a performer.
Does anyone have a spare or know where to purchase one?
I'm only 2 or 3 kettles away from being that creepy guy down the street with all the Webers
                            WKC Collaborator
                        Viva La  Charcoal Revolution

Heyjude

  • WKC Performer
  • Posts: 4660
Re: Performer Gas Assist Hose Part
« Reply #1 on: November 16, 2014, 11:07:33 AM »
They are part of the hose assembly..
I don't care if you don't like my Avatar, its there for me..

Hogsy

  • WKC Performer
  • Posts: 3649
Re: Performer Gas Assist Hose Part
« Reply #2 on: November 16, 2014, 12:17:46 PM »
Ok thanks AJ
Does anyone have a spare hose and reg off a SS Performer?
Are they still available or do I have to buy one for a new performer?
« Last Edit: November 16, 2014, 12:26:11 PM by Hogsy »
I'm only 2 or 3 kettles away from being that creepy guy down the street with all the Webers
                            WKC Collaborator
                        Viva La  Charcoal Revolution

Hogsy

  • WKC Performer
  • Posts: 3649
Re: Performer Gas Assist Hose Part
« Reply #3 on: November 16, 2014, 03:03:02 PM »
Just got off the phone from weber, they have them in stock but cost $50....ouch!!! That's nearly as much as I paid for the performer
Part number- 78788
I'm only 2 or 3 kettles away from being that creepy guy down the street with all the Webers
                            WKC Collaborator
                        Viva La  Charcoal Revolution

addicted-to-smoke

  • WKC Ambassador
  • Posts: 5783
Re: Performer Gas Assist Hose Part
« Reply #4 on: November 17, 2014, 10:03:07 AM »
It's twice that at ereplacements.com, for the early Performers: http://www.ereplacementparts.com/hose-and-regulator-assembly-p-1477479.html

About $33 for non-SS Performers, http://www.ereplacementparts.com/regulator-assembly-p-1477523.html

My understanding is that the brass nozzle would be the same on both, and the hose too except that both ends are right-angled on the later one.

But a Performer expert more familiar with both kinds would have to corroborate that assertion.
It's the iconic symbol for the backyard. It's family/friends, food and fun. What more do you need to feel everything [is] going to be all right. As long as we can still have a BBQ in our backyard, the world seems a bit of a better place. At least for that moment. -reillyranch