Replacement shaft for weber Rotisserie

[Rick H]

Hi Everyone,

Does anyone know if a replacement shaft for Weber Rotisserie can be bought,

The shaft for out Weber Rotisserie missing possibly lost when we were moving home,

Thanks In advance Rick

[michaelmilitello]

Try this.   Might want to check the measurements.   Do you need one for charcoal or gas?

https://www.grillparts.com/rotisseries/default.asp?product_id=SR-43


Sent from my iPhone using Tapatalk

[Rick H]

Hi Michael,

Thanks for the response,

One for the Weber charcoal model 22"

Sent a message to company asking if it could be advised what one would be required and any bushes etc for where shaft contacts the BBQ

[CatskillSmoker]

Weber doesn't sell the spit rod separately.

[Rick H]

Any ideas if there are after market ones available?


Sent from my iPhone using Weber Kettle Club

[PotsieWeber]

Some people look for something cheap (any brand) and long enough, or a bit longer, locally (like a used one on FB, craigslist, offerup, letgo, whatever, & then use a grinder (or something) to create a groove in the shaft at the appropriate spots.  Bonus is you often get a spare motor.

If you do that, you might be lucky enough to stumble across a cheap one (used or or new) (and likely non-Weber) that still has a box says it has SS shaft & forks. 

I didn't need one, but bought one because it was stainless & had a thicker heavy duty octagonal shaft that was machined to a square where it goes into the motor.  Was able to see the length on the box & instead of using a grove, it had one of those round clamp sort of things you can put anywhere on the shaft that serves the same purpose as a groove.

[Walchit]

@Mr.CPHo sent me a spit from a genesis and I ground a grove into it. I also had another member here agent me a char-broil brand one. It is chrome plated, so not as good of quality as the stainless weber brand. I have seen a few genesis rotis come up for sale but they have been a little further away than I wanted to drive. Let me pop out a tape measure and I will let you know the shaft size and stuff