Larger wheels for OTP?

[90b4032]

I would like to add casters to my OTP and get larger diameter wheels to level it up. I swear I've seen someone on here with a similar mod on here but can't find it. I took the casters from my performer and put them on the OTP and it looks like I will need 11" diameter wheels to level it. Anyone done this?

Sent from my SAMSUNG-SM-N910A using Weber Kettle Club mobile app

[Jules V.]

Post a picture or  two so we have a better idea of what you're trying to  accomplish.


JV

[YardBurner]

Not many options for 11 inch.

This is one.

https://www.mowpart.com/110-1632-toro-11-inch-wheel-asm.html?gclid=Cj0KCQjwierMBRCHARIsAHl9i4G1ggvNWJNNmKIZkNH2dpu-wfU8hiOy5HkkCHyqwoX4wgeNzb39xvIaAjhWEALw_wcB

You could paint the hub to match the grill or the frame.

[90b4032]

Those wheels should work well as long as they are for a 3/8" axle.

Sent from my SAMSUNG-SM-N910A using Weber Kettle Club mobile app

[YardBurner]

If the axle hole is too large
you can get bushings at
almost any ACE Hardware.

Just take your axle and wheel with you.
Done this many times for other equipment.