Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: Bluesman on July 28, 2013, 06:11:02 AM

Title: Hey I never got any........
Post by: Bluesman on July 28, 2013, 06:11:02 AM
I've had my 98 SS Performer since new. I just noticed....I ain't got no farking casters. I'm suppose to have casters right? Or are you guys adding them on and making me nuts......
Title: Hey I never got any........
Post by: Thin Blue Smoke on July 28, 2013, 06:32:02 AM
Quote from: Bluesman on July 28, 2013, 06:11:02 AM
I've had my 98 SS Performer since new. I just noticed....I ain't got no farking casters. I'm suppose to have casters right? Or are you guys adding them on and making me nuts......

So is it off kilter a bit? Without my casters the table would resemble more of a boat ramp... If they were added, adjustments to the leg height would have to be made.
Title: Re: Hey I never got any........
Post by: Bluesman on July 28, 2013, 06:38:03 AM
I checked level and it's spot on. There are plastic inserts in the legs so mine must be pre-caster model............Chit. I wanted casters. And NO I'm not carving the legs up.
Title: Re: Hey I never got any........
Post by: edhead35 on July 28, 2013, 06:39:58 AM
Maybe a mod?
Title: Re: Hey I never got any........
Post by: Bluesman on July 28, 2013, 06:45:51 AM
Quote from: edhead35 on July 28, 2013, 06:39:58 AM
Maybe a mod?

The legs would have to be shortened to allow for the additional caster height. I'd fark it up........
Title: Re: Hey I never got any........
Post by: G$ on July 28, 2013, 06:54:42 AM
Are the current wheels six or eight inch?
Title: Re: Hey I never got any........
Post by: Bluesman on July 28, 2013, 07:10:41 AM
Quote from: G$ on July 28, 2013, 06:54:42 AM
Are the current wheels six or eight inch?

I have the 8" wheels. I'm going to Menards and see if I can find some tubing that will fit inside the axles sides. I can insert the extensions, re-drill for the axle and then add the casters. Two thing come form this. The grill will be higher, which I like and I get casters...........Win WIN
Title: Re: Hey I never got any........
Post by: Bman on July 28, 2013, 07:12:01 AM
I have two '98 SS Performers and both have casters (and sit level)
You can get the caster in a twin pack at Home Depot for like 5 bucks. 
If you have 8" wheels and it sits level, something weird is going on.
Title: Re: Hey I never got any........
Post by: Bluesman on July 28, 2013, 07:17:26 AM
Quote from: Bman on July 28, 2013, 07:12:01 AM
I have two '98 SS Performers and both have casters (and sit level)
You can get the caster in a twin pack at Home Depot for like 5 bucks. 
If you have 8" wheels and it sits level, something weird is going on.

It sits level. Like I said it has plastic end caps were the casters would go. This must be the way I got it in the box.
Title: Re: Hey I never got any........
Post by: Bman on July 28, 2013, 07:24:59 AM
Doesn't make sense.  Don't understand how we each have '98 Performers w/ 8" wheels and both sit level --- only mine has casters.
I just went and measured mine.  At the 8" wheel end and the caster end, it's 29 5/8" high from the deck to the top of the frame. 
What does yours measure?
Title: Re: Hey I never got any........
Post by: Bluesman on July 28, 2013, 07:29:39 AM
Quote from: Bman on July 28, 2013, 07:24:59 AM
Doesn't make sense.  Don't understand how we each have '98 Performers w/ 8" wheels and both sit level --- only mine has casters.
I just went and measured mine.  At the 8" wheel end and the caster end, it's 29 5/8" high from the deck to the top of the frame. 
What does yours measure?

Axle side. From bottom of leg to deck is 26" with the axle hole center 1" from the bottom. Other side, yup, 29 5/8"
Title: Re: Hey I never got any........
Post by: pbe gummi bear on July 28, 2013, 07:35:57 AM
The ss performer without gas assist did not come with casters so those frame parts to let it sit level exist.
Title: Re: Hey I never got any........
Post by: Bman on July 28, 2013, 07:43:35 AM
Quote from: Bluesman on July 28, 2013, 07:29:39 AM
Axle side. From bottom of leg to deck is 26" with the axle hole center 1" from the bottom. Other side, yup, 29 5/8"

Axle side - bottom of leg (no plastic insert) to bottom of deck frame = 25.25"  (26.5" to top of frame)  Overall, 29 5/8" high

Caster side - bottom of leg (w/ plastic insert) to bottom of deck frame = 26"   (27.25" to top of frame)  Overall, 29 5/8" high

If you're caster side is 29 5/8" high without any casters, low long are those legs?  28.25" plus the 1.25" frame for the top?

EDIT - Gummi just cleared the air.
Title: Re: Hey I never got any........
Post by: pbe gummi bear on July 28, 2013, 07:50:49 AM
Do I win a prize? :D
Title: Re: Hey I never got any........
Post by: Bman on July 28, 2013, 07:54:30 AM
Quote from: pbe gummi bear on July 28, 2013, 07:50:49 AM
Do I win a prize? :D

;D

(https://encrypted-tbn3.gstatic.com/images?q=tbn:ANd9GcSNHWDN9lAtXSGHg-iZp8bLZ-_DCFSiYCDjPmPnx1KisqBSPbQC)
Title: Re: Hey I never got any........
Post by: pbe gummi bear on July 28, 2013, 07:59:41 AM
How much taller on your performer would you like to go?
Title: Re: Hey I never got any........
Post by: Bluesman on July 28, 2013, 08:37:55 AM
Quote from: pbe gummi bear on July 28, 2013, 07:59:41 AM
How much taller on your performer would you like to go?

2" or so would be great
Title: Re: Hey I never got any........
Post by: javahog2002 on July 28, 2013, 09:21:08 PM
Quote from: pbe gummi bear on July 28, 2013, 07:35:57 AM
The ss performer without gas assist did not come with casters so those frame parts to let it sit level exist.

Yup I have 2 SS Performers with gas and casters and one with no gas and no casters. 
The casters are a POS in my opinion.  They never seem to roll right. The performer without the casters is just as easy to move as those with casters since I usually have to lift up the end with the casters to move it anyway.
Title: Re: Hey I never got any........
Post by: 1buckie on July 28, 2013, 09:30:34 PM


  "The casters are a POS in my opinion.  They never seem to roll right."

I don't have one, but I know those casters.....office equipment.....I wouldn't expect them to last long & would try to fix something from metal wheels to replace them.......

Oh, Lawrence.....a project !!!!!
Title: Re: Hey I never got any........
Post by: Bman on August 04, 2013, 05:00:00 AM
Blue - is your bowl drilled for the gas assist tube?  Just asking the question here as it came up in another thread.
Title: Re: Hey I never got any........
Post by: Bluesman on August 04, 2013, 07:15:10 AM
Quote from: Bman on August 04, 2013, 05:00:00 AM
Blue - is your bowl drilled for the gas assist tube?  Just asking the question here as it came up in another thread.

No mine is not drilled for the gas assist. But my New Brick Red is and it's got casters.............. 8)
Title: Re: Hey I never got any........
Post by: pbe gummi bear on August 04, 2013, 07:28:35 AM
Quote from: 1buckie on July 28, 2013, 09:30:34 PM


  "The casters are a POS in my opinion.  They never seem to roll right."

I don't have one, but I know those casters.....office equipment.....I wouldn't expect them to last long & would try to fix something from metal wheels to replace them.......

Oh, Lawrence.....a project !!!!!

Way ahead of you Buckie! Here's my ss with casters and off road tires. It's lifted 1" but I think I could have done more.

Quote from: pbe gummi bear on June 26, 2013, 06:46:07 PM
Quote from: G on June 26, 2013, 06:39:55 PM
Sorry honey, no cooking tonight.  The grill has a flat.....

All joking aside, those mods are cool.  A true ATG.  All terrain grill.

Thanks, G. More like "Honey we can't cook on the Performer because I don't want to get it dirty before I finish it. True story. She is not amused but luckily we have other Weber devices.

I also stretched the work surface using all oem parts. I hope to be done with the grill in a few weeks.

(https://fbcdn-photos-a-a.akamaihd.net/hphotos-ak-ash3/s720x720/1011043_990395023278_635095327_n.jpg)

You can see the raked stance too. It sits higher at the kettle. Not my proudest moment. Lol

I forgot to account for the taller wheels so it sits crooked. Luckily I have extra frame parts.