I started to clean up my yellow 18 yesterday
I have been in two minds whether to use the original daisy wheels or use some new ones
The 18 was missing a vent when I received it and although a few members offered to send me an old one I decided to replace with new
One call to Weber CS and a couple days later 12 new dampers turned up on my doorstep 8)
Here's a couple of pics , what do ya think??
Before-
(http://i1165.photobucket.com/albums/q585/joelhogston/364D4625-ED79-4601-B6E9-57BAEEB25D19-330-000000BAB210B69E_zpsc6fb670d.jpg)
After-
(http://i1165.photobucket.com/albums/q585/joelhogston/DCDB9F44-E789-4FEA-81E6-C8762C7386D9-330-000000BAC09D9AE4_zps8d74dc14.jpg)
Some of Brian's best work
(http://i1165.photobucket.com/albums/q585/joelhogston/62AE06D0-4B2D-401C-9D4C-22536DE61F2D-330-000000BAE4910061_zpsf1e03db0.jpg)
Now for the wheels, there in pretty good condition and I've ordered some white walls from Brian but one of the treads has come off the wheel and I'm after some advice on the best way to fix it
When the tread is placed around the the wheel there's still a 1/2 inch gap in the tread do I just live with it or is there some other way of fixing it ? What's the best way to reattach the tread?
Here's a pic -
(http://i1165.photobucket.com/albums/q585/joelhogston/DEFCB192-DAA5-4488-A645-DA63626900FE-330-000000BCD5C57617_zps854447e2.jpg)
WOW...............we can get New Daisy wheels from Weber? I'm in thanks. Keep us posted on the RRR................What did you use for fastening..........Inquiring minds want to know.
You might want to start with attaching the tread, for about an inch with epoxy. Then use a heat gune to gently pull it around another few inches and attach with epoxy. Continue until it is flush on the ends.
Good start....that lid looks like new. What is the part number for those dampers? I only thought they sold the newer style (non small tab).
Quote from: G on July 20, 2013, 01:59:06 PM
Good start....that lid looks like new. What is the part number for those dampers? I only thought they sold the newer style (non small tab).
aaahh only sell you gypsys big tabs
i suppose its a benefit of being aussie you get all the gear
great work on the vents hogsy :-X
For a limited only !!!!!
For every mini ranch sold you will receive a free set of dampers
Those new dampers are sweet! Did you do Duke's snip & shape method? Those look authentic!
Ding!!Ding!! We Have a Winner!!
Yep there just standard dampers that needed a bit of a snip
Here's what I used-
(http://i1165.photobucket.com/albums/q585/joelhogston/0034F6DC-1431-44F3-8A27-7E09669F4940-605-000000E62FCA674A_zps7b3a29a8.jpg)
The scissors are out of a First Aid Kit, could of used snips but the scissors work fine
I also used a file for some fine tuning
Here it is compared to the original
(http://i1165.photobucket.com/albums/q585/joelhogston/FA1A54D4-E5BB-48BA-A6F6-C619134EDFB8-330-000000CDB7B36A6C_zpsde7faf57.jpg)
Shame about the date code, but what are ya gonna do
Damper Perfection! ;)
Quote from: Duke on July 21, 2013, 09:23:08 PM
Damper Perfection! ;)
Is that an aussie joke? Damper? ;)
Ken
Quote from: Hogsy on July 20, 2013, 09:50:35 PM
Ding!!Ding!! We Have a Winner!!
Yep there just standard dampers that needed a bit of a snip
Here's what I used-
(http://i1165.photobucket.com/albums/q585/joelhogston/0034F6DC-1431-44F3-8A27-7E09669F4940-605-000000E62FCA674A_zps7b3a29a8.jpg)
The scissors are out of a First Aid Kit, could of used snips but the scissors work fine
I also used a file for some fine tuning
Here it is compared to the original
(http://i1165.photobucket.com/albums/q585/joelhogston/FA1A54D4-E5BB-48BA-A6F6-C619134EDFB8-330-000000CDB7B36A6C_zpsde7faf57.jpg)
Shame about the date code, but what are ya gonna do
Get a punch and stamp a new date...
Sent from my XT1080 using Tapatalk 2
Excellent work so far. Its cleaning up very nice. Nice touch on the dampers!
Hogsy, is there going to be a problem and do we care about the little stopper tabs being reversed? I have never notced this before and not sure how it will matter in practice.
Good call G$
Because there reversed the tab doesn't slot into the tear drop hole when in the closed position
It doesn't even slot in in the open position
(http://i1165.photobucket.com/albums/q585/joelhogston/1DB2E309-F650-46C9-A2A3-893FFF73FBE6-3265-0000036AF9412F9C_zpse96151ad.jpg)
Which leaves a slight opening when closed
(http://i1165.photobucket.com/albums/q585/joelhogston/3DF65D9A-9946-4587-A31C-7E15D1CD6FE1-3265-0000036AFF68EE5E_zpsbf681f4b.jpg)
I guess the only problem is it might not shut down
Yeah, that is what I thought, closing down mught be an issue, but only for coal misers like me. No problems for the "devil may care" guys like Zavod... he thinks charcoal grows on trees!
Question, is the new mounting hardware from Weber, or did you pick it up atr the HW store?
The hardware is from Weber, it came with the dampers
I don't like it and will probably upgrade to SS
I had no luck glueing these treads on with a two part epoxy(Araldite)
(http://i1165.photobucket.com/albums/q585/joelhogston/DEFCB192-DAA5-4488-A645-DA63626900FE-330-000000BCD5C57617_zps854447e2.jpg)
Problem is the lack of glue-able area
Any other suggestions?
Anyone have a spare wheel?
I have a glue that will purportedly stick anything to ANYTHING! I'm not sure of the name but I'll have a look when im next out in the garage.
Sent from another planet using Mental Telepathy.
bump ;)
I'm still digging his vent job! ;)
Thanks for the bump, its all cleaned up and ready to go
I'm just waiting on the white walls before I take some pics
Now to start on the 22
How did you wind up regluing the wheels?
Quote from: Duke on August 03, 2013, 03:53:20 PM
How did you wind up regluing the wheels?
Yeah all good , I ended up using caulking adhesive Sikaflex 227
Seems to be holding well