Before pic.
(http://pics.weberkettleclub.com/images/IMG_2977ad5758f79b222b99.jpg)
After pic.
(http://pics.weberkettleclub.com/images/z4.jpg)
There are many ways to install ash bucket ring. Here is how I did mine. One ring tab had to be trimmed to fit into the leg socket and 2 other ring tabs bent outward and tightened as shown. Nothing visible from outside.
(http://pics.weberkettleclub.com/images/z5.jpg)
Looking in from the bowl. Tip of the vent openings extending pass the ash bucket ring blocked off.
(http://pics.weberkettleclub.com/images/rsz_z6.jpg)
Now, converted to a Smoker. Ready to smoke some beef ribs.
(http://pics.weberkettleclub.com/images/rsz_z10.jpg)
Very nicely done I like you can grill or smoke with same unit.
Sent from my SAMSUNG-SM-J727A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Quote from: Easy on June 16, 2019, 01:22:55 PM
Very nicely done I like you can grill or smoke with same unit.
Sent from my SAMSUNG-SM-J727A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Thanks! Even small Smoky Joe or Go Anywhere are both versatile enough to do double duties.
I intend to hang full 4 to 6 racks of side ribs on this 18" next weekend.
(http://pics.weberkettleclub.com/images/rsz_z11.jpg)
Getting acquainted with the shorty 18".
(http://pics.weberkettleclub.com/images/rsz_z12.jpg)
Blue 18s are my favorite grills!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
what do the acronyms OTS and OTG stand for?
Nice. I will have to remember that for the future. If I find a colored 18" I really want to add an ash bucket just like that if it doesn't already have one. Nice midget mod btw. Interesting how you made the front leg wider. Hadn't seen that before.
Quote from: Marzipan on June 19, 2019, 03:06:29 PM
what do the acronyms OTS and OTG stand for?
One Touch Silver and One Touch Gold
This is now Original Kettle and original kettle premium.
One is with the tray and one is with the ash catcher.
-H
Quote from: Hollando on June 19, 2019, 06:14:30 PM
Quote from: Marzipan on June 19, 2019, 03:06:29 PM
what do the acronyms OTS and OTG stand for?
One Touch Silver and One Touch Gold
This is now Original Kettle and original kettle premium.
One is with the tray and one is with the ash catcher.
-H
thank you for the clarification. I've never understood Weber's naming scheme...Silver, Gold & Platinum would give one to think of a product's color, and it does not in this case. quite confusing! :P
I believe it is possible that each of the series could have colour palette available too. But, the same could be said for model editions and years....
Im sure a WKC veteran could probably answer that better though
-H
Quote from: Hollando on June 20, 2019, 07:33:20 AM
I believe it is possible that each of the series could have colour palette available too. But, the same could be said for model editions and years....
Im sure a WKC veteran could probably answer that better though
-H
that makes me think that if these are actually made in the US, Weber could make a color-to-order option and paint them as individual orders come in. that would definitely satisfy the community!
Quote from: Marzipan on June 20, 2019, 07:30:52 AM
Quote from: Hollando on June 19, 2019, 06:14:30 PM
Quote from: Marzipan on June 19, 2019, 03:06:29 PM
what do the acronyms OTS and OTG stand for?
One Touch Silver and One Touch Gold
This is now Original Kettle and original kettle premium.
One is with the tray and one is with the ash catcher.
-H
thank you for the clarification. I've never understood Weber's naming scheme...Silver, Gold & Platinum would give one to think of a product's color, and it does not in this case. quite confusing! :P
For newer members unfamiliar with some acronyms.
https://weberkettleclub.com/forums/weber-kettles-accessories/wkc-glossary-2017/
For Weber kettle history. http://weberkettleclub.com/determine-age-of-old-grill/ which is on the top of the main forum.
Quote from: ReanimatedRobot on June 19, 2019, 06:09:36 PM
Nice. I will have to remember that for the future. If I find a colored 18" I really want to add an ash bucket just like that if it doesn't already have one. Nice midget mod btw. Interesting how you made the front leg wider. Hadn't seen that before.
The idea came from these hard to come by Euro kettles. I like doing unique mods. ;D
(http://pics.weberkettleclub.com/images/Brownie_01.jpg) (using member's pic to show what it looks like.)
I tried to emulate the back legs too but without proper size bender... wasn't worth trying. Instead, I used 1/2" width aluminum spacer between wheels to give that true dually truck look. Form and function accomplished. ( cool look and some extra stability for both front and back legs)
These Eurolegs were made from 81 to 84 for the european market.
The background of them is, you can step with your foot at the fronthook and push it in the ground of your garden. You can spy at the rear legs a clip. With this clip you can fix the rear wheels.
This photo i believe is from @Jan M from Germany
Sent from my SM-G950F using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Quote from: greenweb on June 20, 2019, 04:54:34 PM
Quote from: ReanimatedRobot on June 19, 2019, 06:09:36 PM
Nice. I will have to remember that for the future. If I find a colored 18" I really want to add an ash bucket just like that if it doesn't already have one. Nice midget mod btw. Interesting how you made the front leg wider. Hadn't seen that before.
The idea came from these hard to come by Euro kettles. I like doing unique mods. ;D
(http://pics.weberkettleclub.com/images/Brownie_01.jpg) (using member's pic to show what it looks like.)
I tried to emulate the back legs too but without proper size bender... wasn't worth trying. Instead, I used 1/2" width aluminum spacer between wheels to give that true dually truck look. Form and function accomplished. ( cool look and some extra stability for both front and back legs)
It is very surprising how strong the legs of these things really are. I tried to bend one so I could add a caster to the front leg not that long ago. It was a super pain just to get it to bend a little bit and I really didn't even get the leg in a straight down fashion for the caster and only did a so so job of making the bend. It works, but I would never try to do a bend like that Euro leg. Cool concept though if I run on to someone that has one haha.
Quote from: ReanimatedRobot on June 21, 2019, 03:58:39 AM
It is very surprising how strong the legs of these things really are. I tried to bend one so I could add a caster to the front leg not that long ago. It was a super pain just to get it to bend a little bit and I really didn't even get the leg in a straight down fashion for the caster and only did a so so job of making the bend. It works, but I would never try to do a bend like that Euro leg. Cool concept though if I run on to someone that has one haha.
why not just cut it?
Quote from: Marzipan on June 21, 2019, 06:13:20 AM
Quote from: ReanimatedRobot on June 21, 2019, 03:58:39 AM
It is very surprising how strong the legs of these things really are. I tried to bend one so I could add a caster to the front leg not that long ago. It was a super pain just to get it to bend a little bit and I really didn't even get the leg in a straight down fashion for the caster and only did a so so job of making the bend. It works, but I would never try to do a bend like that Euro leg. Cool concept though if I run on to someone that has one haha.
why not just cut it?
I did cut some of it. However it was a stem caster and I was trying to get it somewhat straight for that. It works and rolls a lot better. No one would probably notice that it isn't a perfect job at a glance. I would probably do it differently if I did it all over again. Mostly my down fall was I didn't have the right tools to do it cleanly.
Sent from my SM-G925R4 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Quote from: Bertl on June 20, 2019, 08:54:33 PM
These Eurolegs were made from 81 to 84 for the european market.
The background of them is, you can step with your foot at the fronthook and push it in the ground of your garden. You can spy at the rear legs a clip. With this clip you can fix the rear wheels.
This photo i believe is from @Jan M from Germany
Sent from my SM-G950F using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
One of my favorite pic and the style of the kettle. One of few other members pics I keep on my computer favorite folder.
On my to do list to turn my Brownie into one. Not hard to bend the legs if you have the proper size bender.