I few weeks ago pbe gummie posted a "b" 18" lid and a rolled ash catcher. I needed a rolled ash catcher for my 18" BBQ Kettle. Though it isn't period correct I made the purchase. He said the 18" "B" lid was in great condition, but the tray not so good. He PM'd me some pictures, I said no problem " I can clean that up".
This is what he didn't think would clean up.
(http://i1271.photobucket.com/albums/jj623/glrasmussen/null_zps9947e2cc.jpg) (http://s1271.photobucket.com/user/glrasmussen/media/null_zps9947e2cc.jpg.html)
So I was cooking and did a little clean-up....Didn't come out to bad?
(http://i1271.photobucket.com/albums/jj623/glrasmussen/null_zpsa5fd523f.jpg) (http://s1271.photobucket.com/user/glrasmussen/media/null_zpsa5fd523f.jpg.html)
While I waiting for dinner to get done and Zav wanted some picture of my recent purchase, Took a few while I was waiting. Walnut yet to be installed.
(http://i1271.photobucket.com/albums/jj623/glrasmussen/null_zps3d29e30c.jpg) (http://s1271.photobucket.com/user/glrasmussen/media/null_zps3d29e30c.jpg.html)
what did you use to get it that clean?
Quote from: LightningBoldtz on June 05, 2013, 06:12:44 PM
what did you use to get it that clean?
LBoldtz, here is the combo, but I have to refine it do to some waste...
1) CLR, I am going to start using this in a spray bottle. This is the first application.
Going forward, spray with this, scrub with SOS pad and repeat...
2) Rinse and use the Mag Cleaner(Tray must be lightly wet). Let stand for 30 seconds, lightly scrub with SOS pad.
3) Repeat #1 if not to your liking.
4) Mothers using 0000 as the applicator.
5) Buff, before Mothers is dry. This, is ongoing, as it comes up black for a while, then it will shine.
6) This is a work in progress, at figuring this out, so if you can add, please do. But this is what is working for me so far.
That looks brand new, better than new! Nice job
WoW, I could damn near shave with that!!!!
Whats LCR? I assume you also mean Mothers Mag wheel Polish as well..
8)
Quote from: Heyjude on June 05, 2013, 07:14:19 PM
Whats LCR? I assume you also mean Mothers Mag wheel Polish as well..
8)
Sorry, CLR. It is a chemical available at HD or Loses. Removes lime, calcium and rust., Mothers Mag wheel Polish, 0000 as applicater.
Sent from my Kindle Fire using Tapatalk 2
Do you mean CLR at Lowes?
(http://pics.drugstore.com/prodimg/81915/220.jpg)
Yeah but depending on how you tilt the container as it comes out determines which part, the lime, rust or calcium gets cleaned first.
Quote from: Heyjude on June 05, 2013, 07:34:35 PM
Do you mean CLR at Lowes?
(http://pics.drugstore.com/prodimg/81915/220.jpg)
Yes, that's the stuff, thanks for correcting me. I am going to use it in a spray bottle going forward. I will use less and can control if better. Light sprays, couple applications.
Sent from my Kindle Fire using Tapatalk 2
What does it actually do to the aluminum? 8)
Quote from: Heyjude on June 05, 2013, 07:56:40 PM
What does it actually do to the aluminum? 8)
Well, the whole process makes them shine. CLR and SOS scrub gets rid of the build up if crud. The next step is the Mag Aluminum cleaner, let set for 30 seconds, lightly scrub again with SOS pad. Finish with 0000 and Mothers, polish...
Sent from my Kindle Fire using Tapatalk 2
That's amazing, Greg. Thanks for sharing your secrets. I didn't say it couldn't be done. I said I didn't want to do it! :D That may change now though for the aluminum parts. ;)
Oh and that pan is in even better shape than I could have imagined!
That looks fantastik Greg. my new avacado has the older thinner twist pan that needs to be cleaned as well. I am a little concerned that scrubbing it is going to mis-shape it even more. I will definitely add CLR to my treatment plan.
Very nice work Greg! I am going to give that a shot on my next pan.
That came out looking NOS! I might have to give this a try on my 22 version. Its clean, but not as clean as yours. :o
Quote from: G$ on June 05, 2013, 09:06:13 PM
That looks fantastik Greg. my new avacado has the older thinner twist pan that needs to be cleaned as well. I am a little concerned that scrubbing it is going to mis-shape it even more. I will definitely add CLR to my treatment plan.
You'll be fine. I use a rubber mallet and a very dense rubber material I have, the come into shape pretty good. The ones with deeper creases, not so good.
@glrasmussen I have a 1970 ash pan that doesn't have the slightest bend... it's near perfect but for the buildup of grease and ash. I've had it soaking in a sink of warm water with a cup of CLR added, per the ash pan cleanup guide on our home page. Now that the "crud" has re-absorbed moisture and softened up, what is the best way to remove it? I'm guessing a single edge razor but before I start, I want to confirm that's the right thing to do. I sure don't want to make a mistake on this...(https://uploads.tapatalk-cdn.com/20171105/d178d56b2b0e41309f3759ef4003d9c3.jpg)
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Try a 1 inch plastic putty knife
Quote from: TexasOnion on November 05, 2017, 10:13:27 AM
Try a 1 inch plastic putty knife
Good call.
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Steel wool.
Don't use a razor blade on the aluminum ash pan. Aluminum is a soft metal and and the razor blade will actually gouge it and leave deep scratches. As mentioned above, start with a plastic putty knife and then move onto steel wool. You can also use a combination of Dawn soap and SOS pads. They work good on built up grease like that. Always work in circular motions.
Quote from: Cellar2ful on November 05, 2017, 10:51:02 AM
Don't use a razor blade on the aluminum ash pan. Aluminum is a soft metal and and the razor blade will actually gouge it and leave deep scratches. As mentioned above, start with a plastic putty knife and then move onto steel wool. You can also use a combination of Dawn soap and SOS pads. They work good on built up grease like that. Always work in circular motions.
10-4. How does an SOS pad compare to 0000 steel wool?
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
If you want to use a razor blade, try a PLASTIC one. If you are in the midwest & have a Menards near you, that is where you will probably find the best price. Otherwise, a lot of auto parts stores carry them.
SOS is more coarse than #0000 steel wool. I use the SOS and Dawn soap when first attacking built up grease on bowls, lids and ash pans. Once the initial crud is removed, I use the #0000 steel wool to polish and remove fine deposits that may have been missed. The good thing about SOS and Dawn soap is they both use biodegradable ingredients. I just scrub down the kettles on my lawn. It waters the lawn and causes no harm to it either.