Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: Maineac on November 24, 2018, 02:30:08 PM

Title: Weber Performer Deluxe Questions
Post by: Maineac on November 24, 2018, 02:30:08 PM
I'm wondering 2 things - what is the diameter of the hole where the igniter enters the bowl?
And there are three triangular areas below the charcoal grate that the ash sweepers don't reach; does the igniter tube come through one of those areas?  Thanks.
Title: Re: Weber Performer Deluxe Questions
Post by: ClubChapin on November 24, 2018, 05:36:31 PM
http://weberkettleclub.com/blog/2014/04/25/weber-grill-mod-adding-gas-assist/ (http://weberkettleclub.com/blog/2014/04/25/weber-grill-mod-adding-gas-assist/)


The hole size is in the above post. It is not round.


I think the tube is above the sweeps.
Title: Re: Weber Performer Deluxe Questions
Post by: YardBurner on November 24, 2018, 06:23:01 PM
Quote from: Maineac on November 24, 2018, 02:30:08 PM
And there are three triangular areas below the charcoal grate that the ash sweepers don't reach; does the igniter tube come through one of those areas?  Thanks.

Is it possible that it was assembled wrong???

Post some pics if you can.
Title: Weber Performer Deluxe Questions
Post by: Jules V. on November 24, 2018, 06:38:08 PM
Hole is centered between the tip of the sweeps and charcoal grate. You make it a little too high and the burner will come into contact with the grate. Too low and the tip of the sweeps will come into contact with the burner. Hole is slightly oval because of the curvature of the bowl. Slightly larger than 3/4" horizontally and 1"  vertically. Adding the pointy tip at the top and bottom of the hole is unnecessary. Just dismantle the burner and insert from the inside of the bowl and then reassemble.
Title: Re: Weber Performer Deluxe Questions
Post by: YardBurner on November 24, 2018, 07:45:09 PM
Edit  double post  plz delete.
Title: Re: Weber Performer Deluxe Questions
Post by: Maineac on November 25, 2018, 05:10:35 AM
Thanks for the responses, guys.  That's the info I was looking for.  I should have been clear about the questions.  I think a blue Performer is the coolest of the cools, but it looks like the only way you can get it (short of major mods) is with the gas ignition which I have zero interest in.  And I wouldn't want the hole in the bowl, especially an oval one.
Yardburner, here is a pic of those triangular areas. 

(http://www.deansmiley.com/Files/Performer/Blower/3%20areas.jpg)
Title: Re: Weber Performer Deluxe Questions
Post by: ClubChapin on November 26, 2018, 04:30:24 AM
I like the gas assist. Works well and more convenient and cleaner than newspaper or wax starters.

I'm sure it would be easy to remove. Could fill the hole with a fender washer.
Title: Re: Weber Performer Deluxe Questions
Post by: captjoe06 on November 29, 2018, 01:21:52 AM
I had a blue performer bowl new in box that came without a hole.

https://northeastbbq.com/2017/08/11/webergrills-blue-performer-build/
Title: Re: Weber Performer Deluxe Questions
Post by: notodehola on November 29, 2018, 09:27:01 PM
My favorite feature of the performer deluxe model is the propane gas grill grill start for the charcoal. No more lighter fluid or pungent self-light briquettes.
Title: Re: Weber Performer Deluxe Questions
Post by: Maineac on November 30, 2018, 12:24:28 AM
Quote from: captjoe06 on November 29, 2018, 01:21:52 AM
I had a blue performer bowl new in box that came without a hole.

https://northeastbbq.com/2017/08/11/webergrills-blue-performer-build/
Yep. That's the one I'm looking for!