Just curious I have done a few searches and did not find any information pertaining to this product but was curious if anyone has any experience with this table from home depot?
https://www.homedepot.com/p/YellaWood-Grill-Table-Kit-IR52X28AGT/205619748
Thanks
Glenn
ps. I am not that handy otherwise I would make my own!
For that kind of money, I would buy a new performer or better yet find a used one for less.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Is the table setup available for purchase with a performer? I am kind of partial to the red kettle even though it keeps having chipping issues.
I just like the way the wood looked my biggest concern was would the kettle and the heat produced cause issues with the wood base?
This is like $50 work of wood and Bolts. It still needs to be finished or sealed. This would be an awesome first time woodworking project. You could get away with just doing this with a jig saw and a drill.
I do think its made for Big Green Egg type grills but you could like the the circle with some type of flashing.
So like some aluminum flashing tacked in place inside the circle would do the trick? I suppose I could attempt to make this on my own, this just looked like an easy assemble option haha.
The bigger problem would be where to put your lid. Your lid Bail with no longer be functional
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Yea I saw that... as well, I dont know why I like the whole table setup it just makes storage easier as I live in a condo and have limited space so any and all storage is useful. I guess I could rig something, I thought more people would have had experience with something like this if not this one.
I'm with
@azbeeking . That looks like a simple project. I wouldn't pay that money for it.
should I build one I will have to keep track via pictures for reference.
Go for it.
I built one similar to this one, but not as long. It does start to burn the wood if you have a real hot bed of coal. I just dump some water on it to stop it. I put 2 wheels on the grill side to make it a bit portable. The reason I made it the legs were broken.
But isnt that bad for the wood to burn with stain and seal on it? I mean along the lines of breathing it in etc?
Not a fan of PT wood plus way too much money. I had plans for one in a wood magazine complete with wheels but never built one. The lid ''hanger'' was a 3/4 or 1 inch hole near the edge. Worked out perfect in picture that I seen.
Quote from: Poorfolks on October 24, 2018, 12:56:44 PM
Not a fan of PT wood plus way too much money. I had plans for one in a wood magazine complete with wheels but never built one. The lid ''hanger'' was a 3/4 or 1 inch hole near the edge. Worked out perfect in picture that I seen.
I can't visualize the hole your talking about but it sounds like a hole for the lid hook? His grill doesn't have a lid hook I'm guessing since it has a bale.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
I tried building a wood cart for my Weber years ago. Finally ditched it and got a Performer and never looked back.
Just buy a Performer, you will be glad you did.
Do they sell just the table for the performer? I like my grill and its only 6-8 months old...
Not that I'm aware of. There are ways to install your red kettle in a performer.
The other option is a stand alone storage table like one from Sams club that has a stainless top and cabinet doors below. I think they are around $150
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
I have the BBQ Dragon side table currently... I may just rock that for now and when spring comes around see how I feel and if I build anything I will document.
Building one from scratch... for table top surface what type of wood should I use? I know I can use normal for base and frame but I want it to be weather protected and I hear from BGE owners that you can use a few coats of danish oil to protect it as opposed to poly or something like that. Ideas?
(sorry for run on sentence)
Would cedar with a sealer work? and pine for frame?
Thanks
http://www.hopkinsmfg.com/2x4/WorkBench-Legs.html
I would suggest this instead. Also available through Lowes / Home Depot / etc.
I would just spend some time looking at the customs here, searching youtube, and looking at Pinterest. If I were to try to build with wood though I would definitely go with a burnt wood and stain project. There is something about a grill in burnt wood that just looks good. There are a lot of ways to build them. I would recommend using a miter saw for most of your cuts if you can get one or have one. Just makes it super quick to measure and cut at a 90 or 45 degree angle.
Honestly, I would just go with some pine wood. Cedar will cost a lot more and if you plan on staining it I don't think it will really make a big difference appearance wise. The stain should last a pretty good amount of time if it isn't getting hit with rain/sun all the time, but be careful how close you put it to your house as it could stain/melt siding.