Title: Ivory SSP
Post by: Jules V. on September 13, 2018, 01:02:28 PM
Post by: Jules V. on September 13, 2018, 01:02:28 PM
Picked this up the other day from a member so i figured i would drop it in a ssp frame for the time being until i figure out a proper frame for it.
(https://uploads.tapatalk-cdn.com/20180930/95695f04eb66a6239ffac25e6bb069dc.jpg)
(https://uploads.tapatalk-cdn.com/20180930/95695f04eb66a6239ffac25e6bb069dc.jpg)
Title: Re: Ivory SSP
Post by: db130 on September 13, 2018, 01:28:43 PM
Post by: db130 on September 13, 2018, 01:28:43 PM
@Jules V, where did you get that handle for the stainless table?
Title: Re: Ivory SSP
Post by: Al b que on September 13, 2018, 02:08:42 PM
Post by: Al b que on September 13, 2018, 02:08:42 PM
Mind blowing beautiful. UR are the ssp KING 
Sent from my VS988 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my VS988 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Ivory SSP
Post by: Jules V. on September 13, 2018, 02:11:18 PM
Post by: Jules V. on September 13, 2018, 02:11:18 PM
Quote from: db130 on September 13, 2018, 01:28:43 PMJust a regular ss cabinet/drawer pull. Holes are slightly farther apart so i trimmed a fender washer to conceal the holes.
@Jules V, where did you get that handle for the stainless table?
Title: Re: Ivory SSP
Post by: Jules V. on September 14, 2018, 12:40:26 AM
Post by: Jules V. on September 14, 2018, 12:40:26 AM
Quote from: Al b que on September 13, 2018, 02:08:42 PMThanks but that's a bit too much.
Mind blowing beautiful. UR are the ssp KING
Title: Re: Ivory SSP
Post by: JayyyR on September 15, 2018, 05:37:13 AM
Post by: JayyyR on September 15, 2018, 05:37:13 AM
I think Weber should draft you into the R&D department. You have some amazing mods!
Title: Re: Ivory SSP
Post by: greenweb on September 15, 2018, 06:08:06 AM
Post by: greenweb on September 15, 2018, 06:08:06 AM
Nice going Jules! Looks beautiful! I like this Euro Ivory much better than Canadian Ivory as the lid vent is 90 deg. to the thermo not 180 deg. Much more accurate keeping tabs on the cooking temp.
Title: Re: Ivory SSP
Post by: Cellar2ful on September 15, 2018, 07:57:23 AM
Post by: Cellar2ful on September 15, 2018, 07:57:23 AM
Tuxedo SSP. Your fabrication and finishing skills are amazing. This one is really classy.
Title: Ivory SSP
Post by: Jules V. on September 16, 2018, 02:29:41 PM
Post by: Jules V. on September 16, 2018, 02:29:41 PM
Quote from: JayyyR on September 15, 2018, 05:37:13 AMThe design aspect is always easy. Keeping the cost of the final product in check is a totally different animal. If i were to design a performer, it would probably retail for $1k and no one would buy it.
I think Weber should draft you into the R&D department. You have some amazing mods!
Title: Re: Ivory SSP
Post by: Josh G on September 17, 2018, 08:57:08 AM
Post by: Josh G on September 17, 2018, 08:57:08 AM
I love this! @Jules V. You did and amazing job from the mounting to the removal of the handle. Looks super clean and stock. Great Job!!!
Title: Re: Ivory SSP
Post by: KettleMaster on September 17, 2018, 10:54:34 AM
Post by: KettleMaster on September 17, 2018, 10:54:34 AM
Amazing job! One of the best SS performers i have ever seen...should be on display somewhere lol
Sent from my SM-G930W8 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SM-G930W8 using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Ivory SSP
Post by: Jules V. on September 17, 2018, 03:49:06 PM
Post by: Jules V. on September 17, 2018, 03:49:06 PM
Ready to roll. Got done baking the touch up paint for the holes and did some finishing touches.
Title: Re: Ivory SSP
Post by: Kneab on September 17, 2018, 04:16:46 PM
Post by: Kneab on September 17, 2018, 04:16:46 PM
Very nicely done Jules 
Sent from my SM-G960U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SM-G960U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Ivory SSP
Post by: Darko on September 18, 2018, 10:39:42 AM
Post by: Darko on September 18, 2018, 10:39:42 AM
I like it!
Title: Re: Ivory SSP
Post by: Mr.CPHo on September 18, 2018, 10:57:54 AM
Post by: Mr.CPHo on September 18, 2018, 10:57:54 AM
That wire loom is pretty slick! Need details please!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Ivory SSP
Post by: Jules V. on September 18, 2018, 11:25:50 AM
Post by: Jules V. on September 18, 2018, 11:25:50 AM
Quote from: Mr.CPHo on September 18, 2018, 10:57:54 AMI got those from old gassers. They're used to insulate the igniter wires. They're double walled, a flexible tube with a braided outer wall. Only thing i can find online are single walled with just the outside braid.
That wire loom is pretty slick! Need details please!
Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
https://www.summitracing.com/parts/hsp-204002?seid=srese1&cm_mmc=pla-google-_-shopping-_-srese1-_-heatshield-products&gclid=EAIaIQobChMIqb3MvaHF3QIVD9tkCh2ROgd5EAQYBiABEgJHffD_BwE
Ultra-Flex Fiberglass High-Temp Braided Loom 1/4 Inch 50ft MIN-50 Per Box https://www.amazon.com/dp/B01HM6QEHW/ref=cm_sw_r_cp_api_3bvOBbAHYC1Z8
Title: Re: Ivory SSP
Post by: LiquidOcelot on September 19, 2018, 03:50:57 PM
Post by: LiquidOcelot on September 19, 2018, 03:50:57 PM
Ok confession, i HATE .... with legs. This is minto pinto and sick AF
Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Title: Re: Ivory SSP
Post by: Lemans on September 22, 2018, 03:02:52 PM
Post by: Lemans on September 22, 2018, 03:02:52 PM
Spectacular!!!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk