Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: GJR on August 04, 2018, 07:39:43 AM

Title: Which ash catcher and ring would you keep/install on SS Performer?
Post by: GJR on August 04, 2018, 07:39:43 AM
I purchased a new steel/black ash catcher set I found on Ebay (sourced from the red limited edition kettle) and thought I'd use it to replace the old one on my late '90s stainless Performer. I started having second thoughts and wondered what your opinions are. The one that came with my Performer seems to be in good shape but needs the handle stripped of rust and painted, and the rest needs a good polishing.

Any functional reason I should hold on to one or the other? If I reuse the old one I plan on using stainless zip ties to fasten it and delete the center bar support. It does seem to be of a heavier construction and I'm thinking it might be easier to empty and re-install than the new version- any thoughts? Thanks!
Title: Re: Which ash pan and ring would you keep/install on SS Performer?
Post by: lksdrinker on August 04, 2018, 08:04:28 AM
You'll have to make some modifications for that new one to work whereas if the hardware (the nut, and the bar) on your original is still good its a direct fit.  If you choose the new black one you'll either  have to cut some slots in the leg sockets for the tabs to fit into, or use some hose clamps to hold the assemble onto the kettle. 
Title: Re: Which ash catcher and ring would you keep/install on SS Performer?
Post by: Filibuster on August 04, 2018, 12:52:09 PM
   Why make unnecessary work for yourself with the modifications. Take care of the tarnish and rust and be done with it.

Sent from my SM-J700P using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)

Title: Re: Which ash catcher and ring would you keep/install on SS Performer?
Post by: Jan M. on August 05, 2018, 02:30:46 AM
I would go for the old one.
Polish it up paint the red parts and it's super authentic and nice!

Here is my attempt:
First polish:
(https://i.imgur.com/5wzuzf3.jpg?1)

Coloring black and red:
(https://i.imgur.com/74h39jJ.jpg?1)

Final polish (finishing) (some hours later :-) ):
(https://i.imgur.com/0I8ozVF.jpg?1)


Ash Pan:
(https://i.imgur.com/3yCZn4D.jpg?1)



Sent from my iPhone using Weber Kettle Club (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Which ash catcher and ring would you keep/install on SS Performer?
Post by: GJR on August 05, 2018, 04:35:02 AM
I think that's the way I'm going to go Jan, thanks for posting- yours looks beautiful!
Title: Which ash catcher and ring would you keep/install on SS Performer?
Post by: 603kettle on August 05, 2018, 05:48:04 AM
GJR-
As long as the cross support bar is solid I would use the old style. Clean, Polish and touch up if necessary.

Jan-
Looks better than New.
Title: Re: Which ash catcher and ring would you keep/install on SS Performer?
Post by: KettleFan on August 06, 2018, 08:40:11 AM
Drill holes into the black bucket so it fits your current (after polishing) handle in the current ring? 
Both of your buckets are aluminum...so an easy mod.