... putting pieces together for a coppermist ssp build out. Seeking advice as I enter into the process.
Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
What advice do you need? I would say don't be hesitant to chop off the handle on the lid bale side- you can leave the handle that will sit under the table as a lot of them came that way from the factory. Don't rest the handles on the frame. That looks really cheesy. Don't worry about the GA. I would even remove all those GA components and it will look super clean. I have a lot of SPP replacement parts if you need anything.
That's what we're here for. Got questions?
qwesthunter makes brackets you'd want for attaching the bowl
Both zavod44 and pbe gummi bear have posted threads a few years ago for how to drill the hole for the gas assist, if adding that feature.
Quote from: pbe gummi bear on April 28, 2018, 10:59:58 AM
... I would even remove all those GA components and it will look super clean. ...
I was also thinking about way to highlight the copper mist's color, without necessarily painting a bunch of stuff copper.
Some judicious removal of some thing might work for that, such as not using the front top side panel, or cutting it so that it still conceals the stuff on the right but not the bowl on the left ... use your imagination!
Quote from: addicted-to-smoke on April 28, 2018, 11:03:37 AM
Quote from: pbe gummi bear on April 28, 2018, 10:59:58 AM
... I would even remove all those GA components and it will look super clean. ...
I was also thinking about way to highlight the copper mist's color, without necessarily painting a bunch of stuff copper.
Some judicious removal of some thing might work for that, such as not using the front top side panel, or cutting it so that it still conceals the stuff on the right but not the bowl on the left ... use your imagination!
Wood or wood veneer on the front panel would be a nice touch. A dark wood table pull would complement the brown kettle too.
Thanks for the early insight...I have an artist friend that is very handy with a rattle can that I was the planning to have paint a coppermist fade on the propane tank. Planning on handles, rollers and matching badge from Brian as well. I have brackets I ordered from R shack bbq already and will have the cart in my possession Tuesday and I will then be able to assess my other needs from there. I will be needing a lid bale for sure but I have a spare ash bucket that I will use in the build. I like the idea of a wood panel for the front and definitely want the kettle color to shine in the build...
Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
I have a lid bale that you are welcome to have. Have your artist friend do something cool with the Weber badge.
Also hit up Jules V. He has done quite a few Performer builds —especially SSP's .
Sent from my iPhone using Tapatalk
Is it a mbh or no? On the cado i just put the brackets under the handles and put the bail on the side. It puts the kettle about 1.5 inches higher than a normal performer. If you do it that way make sure you put them low enough that the bolts are under there the cooking grate straps are. I got lucky and didnt realise that until after i drilled into it.
Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Quote from: LiquidOcelot on April 29, 2018, 07:24:33 AM
Is it a mbh or no? On the cado i just put the brackets under the handles and put the bail on the side. It puts the kettle about 1.5 inches higher than a normal performer. If you do it that way make sure you put them low enough that the bolts are under there the cooking grate straps are. I got lucky and didnt realise that until after i drilled into it.
How can you put the brackets down low(er) and still have the brackets reach both the bowl and the frame? Long bolts with spacers/washers?
All this talk of drilling into a Copper Mist had me nervous until I remembered they actually grow in the OP's backyard. True story.
Quote from: LiquidOcelot on April 29, 2018, 07:24:33 AM
Is it a mbh or no? On the cado i just put the brackets under the handles and put the bail on the side. It puts the kettle about 1.5 inches higher than a normal performer. If you do it that way make sure you put them low enough that the bolts are under there the cooking grate straps are. I got lucky and didnt realise that until after i drilled into it.
Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Not a mbh an H code I bonused earlier in the week while agenting a logo SJ for @cellar2ful
Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
If you go so far to drill holes to install brackets on your bowl, you might as well chop off the handles. Obviously a 2 handle bowl adds a bit more work for these mods.
Quote from: inkaddictedchef1 on April 29, 2018, 09:38:57 AM
Quote from: LiquidOcelot on April 29, 2018, 07:24:33 AM
Is it a mbh or no? On the cado i just put the brackets under the handles and put the bail on the side. It puts the kettle about 1.5 inches higher than a normal performer. If you do it that way make sure you put them low enough that the bolts are under there the cooking grate straps are. I got lucky and didnt realise that until after i drilled into it.
Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Not a mbh an H code I bonused earlier in the week while agenting a logo SJ for @cellar2ful
Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Damn thats pretty and as old as me. You can almost drill out the handles and mount the brackets to yhe same location
Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Quote from: addicted-to-smoke on April 29, 2018, 09:28:46 AM
Quote from: LiquidOcelot on April 29, 2018, 07:24:33 AM
Is it a mbh or no? On the cado i just put the brackets under the handles and put the bail on the side. It puts the kettle about 1.5 inches higher than a normal performer. If you do it that way make sure you put them low enough that the bolts are under there the cooking grate straps are. I got lucky and didnt realise that until after i drilled into it.
How can you put the brackets down low(er) and still have the brackets reach both the bowl and the frame? Long bolts with spacers/washers?
All this talk of drilling into a Copper Mist had me nervous until I remembered they actually grow in the OP's backyard. True story.
This is what i mean i left the handles and mounted the brackets a little lower. Had to manipulate the tabs to the bowl a bit due to the more drastic curvature to the bowl. But i almost made it so my grate didnt fit but i managed to oops it in the right spot
Sent from my SAMSUNG-SM-G928A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
If you can imagine it you can build it!
(http://pics.weberkettleclub.com/images/2017/11/29/P1019994.md.jpg) (http://pics.weberkettleclub.com/image/fIY)
Quote from: SteveZ on April 29, 2018, 02:44:14 PM
If you can imagine it you can build it!
(http://pics.weberkettleclub.com/images/2017/11/29/P1019994.md.jpg) (http://pics.weberkettleclub.com/image/fIY)
What did you do as far as prep prior to painting? Have you had any issues since painting?
Sent from my SM-G955U using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)