Hello all,
I'm hoping someone can help me out with a Gas assist template so I can add to my non-gas assist performer bowl?
I've searched around pretty hard (But I am noOb so I've probably missed it...). I read the awesome article by Lawrence (http://weberkettleclub.com/blog/2014/04/25/weber-grill-mod-adding-gas-assist/ (http://weberkettleclub.com/blog/2014/04/25/weber-grill-mod-adding-gas-assist/)) too but can't seem to find an actual template anywhere...
Any help much appreciated.
Regards
maXX, Welcome to WKC.
I don't know if
@pbe gummi bear (that's Lawrence) still has that template or if he can draft another? My @ mention in that last sentence will alert him to this thread.
Another of our Statesmen also did this mod, I think without a template. Here is that inspiration for you: http://weberkettleclub.com/forums/weber-kettles-accessories/sage-performer/
I think that so long as you ensure the oblong burner tube hole exists just below the charcoal grate, everything else about this project will fall into place. Show us your pics! http://pics.weberkettleclub.com
thanks for the shoutout,
@addicted-to-smoke.
@maXX, sorry I didnt get to your pm. I don't know where that template currently is. I'll see if I can find it.
Thank you very much for the prompt replies,
@addicted-to-smoke &
@pbe gummi bear, they're very much appreciated!
You guys make it look so easy. I'm not really that 'handy' but I'm willing to give this mod a crack.
To clarify ... I like to talk a big game but don't really know shit. And I've never done this mod, but have a few I'd like to try it on some day.
Still, I know how I work, and believe there's a certain amount of "educated" trial and error that can suffice for this sort of project. Take your time and you'll nail it. Having the confidence is easily half the battle when putting tool to hand. :)
I've done this mod. As long as it misses the ash sweep and below the charcoal grate your good!
I'm one of those super-anal must-read-every-bit-of-the-detailed-instructions kind of guy before I feel as though I can really do anything.
I'm just not overly confident with drilling and I don't want to destroy my pride and joy.
Oh well in that case, first pick up a beater kettle from craigslist and go to town on it! And also, where are you located? There are no gas Performers near you, used?
LOL I forgot to mention the ash sweeps, which is ironic. My old Performer, over time, acquired a certain amount of ashed-up gunk under the sweeps. And yeah, I couldn't move the lever because that nearest sweep was now hitting the burner tube.
Drip pans / foil placed under the meat is a good idea.
The step-bit drill bits really do work well for this, or for adding a lid thermometer where none was originally. That, and applying painter's tape or whatever as the links demonstrate.
Thanks again very much for the advice.
I'm in Brisbane Australia. GA Performers aren't readily available here (to me anyways).
I always use a drip pan (did I mention that I'm a bit anal...?) :D
Hi there. I'm attaching a jpeg of template I created when I modified my non-gas assist Performer a couple of years ago. I haven't used started cubes since. I drilled pilot holes then used a Dremel with a fibre cut off blade to cut the "cat-eye"shape. Fits like a glove. Message me and I can send you the pdf of the template which will print to size. This site does not allow pdf attachments.
Ron
[attachment deleted by admin]
I right-clicked it, downloaded "save linked file." Printed at 107% it's darn close. I was able to get the 30.00mm figure to match my ruler, but the 19.00mm figure came up as closer to 18mm.
Thank you so much
@webbr23 !
I just need to get a position from the bowl lip...or wing it between the grill and the sweeper.
I have a performer bowl off the cart I can trace some templates out if you're not in a hurry I will mail them to you.
Thank you
@Meathook for the offer...but I'm in Brisbane Australia. Probably not worth your effort for postage.
Thanks again for the generous offer mate!
Anytime! If you change your mind just send me a note.
Happy to help.