I would like to add casters to my OTP and get larger diameter wheels to level it up. I swear I've seen someone on here with a similar mod on here but can't find it. I took the casters from my performer and put them on the OTP and it looks like I will need 11" diameter wheels to level it. Anyone done this?
Sent from my SAMSUNG-SM-N910A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Post a picture or two so we have a better idea of what you're trying to accomplish.
JV
Not many options for 11 inch.
This is one.
https://www.mowpart.com/110-1632-toro-11-inch-wheel-asm.html?gclid=Cj0KCQjwierMBRCHARIsAHl9i4G1ggvNWJNNmKIZkNH2dpu-wfU8hiOy5HkkCHyqwoX4wgeNzb39xvIaAjhWEALw_wcB
You could paint the hub to match the grill or the frame.
Those wheels should work well as long as they are for a 3/8" axle.
Sent from my SAMSUNG-SM-N910A using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
If the axle hole is too large
you can get bushings at
almost any ACE Hardware.
Just take your axle and wheel with you.
Done this many times for other equipment.