Finally picked up tank for my SSP at Ace Hardware with their 25% off coupon. It looks like I still need an adapter to complete. In the SSP manual it lists a part as "filler adapter". Is this what I need to complete connection? I'm guessing it may be quick connect? Attaching photo of where I need adapter. Any help appreciated...
(http://pics.weberkettleclub.com/images/2017/06/13/Prop.jpg)
Yep, you need a quick connect kit.
https://m.acehardware.com/product/index.jsp?productId=1437922&KPID=1226480&cid=CAPLA:G:Shopping_-_Heaters/Fireplaces&pla=pla_1226480&k_clickid=7f62b608-4f27-4a99-8832-ca331b46ac38
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
You can get one of these to adapt
https://www.amazon.com/gp/aw/d/B000AMAVAM/ref=mp_s_a_1_10?ie=UTF8&qid=1497397559&sr=8-10&pi=AC_SX236_SY340_QL65&keywords=propane+quick+connect+fittings
Or just get new connector to screw into your regulator and take out that quick coupler nipple
https://www.amazon.com/gp/aw/d/B01MZ8PRMP/ref=mp_s_a_1_1?ie=UTF8&qid=1497397832&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=propane+fittings&psc=1
Although I actually prefer all metal like the one below I've had the plastic handles break before just use some pipe dope on the 1/4" threads when you screw the new connector in
https://www.amazon.com/gp/aw/d/B001SGUVJU/ref=mp_s_a_1_1?ie=UTF8&qid=1497398030&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=1%2F4%22+propane+to+p.o.l&dpPl=1&dpID=41I0CeVTBsL&ref=plSrch
(https://uploads.tapatalk-cdn.com/20170613/587d95476fb665f51a2d257c9468dc55.png)
Sent from my iPhone using Tapatalk
Quote from: Mr.CPHo on June 13, 2017, 03:37:16 PM
Yep, you need a quick connect kit.
https://m.acehardware.com/product/index.jsp?productId=1437922&KPID=1226480&cid=CAPLA:G:Shopping_-_Heaters/Fireplaces&pla=pla_1226480&k_clickid=7f62b608-4f27-4a99-8832-ca331b46ac38
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Thanks MR.CPHo
I ran into some other things needing my attention and haven't completed the rehab on the SSP. When I do I'll add pictures and thank you again properly for sending me the charcoal bin I was missing.
Quote from: northwestkettle on June 13, 2017, 03:47:10 PM
You can get one of these to adapt
https://www.amazon.com/gp/aw/d/B000AMAVAM/ref=mp_s_a_1_10?ie=UTF8&qid=1497397559&sr=8-10&pi=AC_SX236_SY340_QL65&keywords=propane+quick+connect+fittings
Or just get new connector to screw into your regulator and take out that quick coupler nipple
https://www.amazon.com/gp/aw/d/B01MZ8PRMP/ref=mp_s_a_1_1?ie=UTF8&qid=1497397832&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=propane+fittings&psc=1
Although I actually prefer all metal like the one below I've had the plastic handles break before just use some pipe dope on the 1/4" threads when you screw the new connector in
https://www.amazon.com/gp/aw/d/B001SGUVJU/ref=mp_s_a_1_1?ie=UTF8&qid=1497398030&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=1%2F4%22+propane+to+p.o.l&dpPl=1&dpID=41I0CeVTBsL&ref=plSrch
(https://uploads.tapatalk-cdn.com/20170613/587d95476fb665f51a2d257c9468dc55.png)
Sent from my iPhone using Tapatalk
Thanks so much for the info. Saves me a lot of time trying to sort out what I needed. Never been much of a gassser but I'm learning...
You bet I would unscrew the quick conect nipple and install the $7 tank connector I posted the picture of it will save you an extra Conection and potential for a leak and it's a cheaper way to go
Sent from my iPhone using Tapatalk
Just get this..
(https://i.ebayimg.com/00/s/MTAwMFgxMDAw/z/STAAAOSwn7JYCIi0/$_58.JPG)