Title: One touch on 18 question
Post by: HoosierKettle on March 08, 2017, 05:09:28 AM
Post by: HoosierKettle on March 08, 2017, 05:09:28 AM
My bottom one touch damper is in the closed position when it is in the middle between the legs (the lever). And open when all the way against either leg. My other one touch kettles are opposite. Does this mean the one touch was installed incorrectly or is this normal?
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: One touch on 18 question
Post by: brewtownbeatdown on March 08, 2017, 06:28:15 AM
Post by: brewtownbeatdown on March 08, 2017, 06:28:15 AM
Sounds like an installation error. Designed to be against leg when "shut down". Pull handle bar out, spin OT 180degrees, reinsert handle & it should be correct.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Title: Re: One touch on 18 question
Post by: kettlebb on March 08, 2017, 06:37:57 AM
Post by: kettlebb on March 08, 2017, 06:37:57 AM
Maybe the blades are in the wrong order. 1 on bottom, 2 middle and 3 on top. I think 2 goes left and 3 is right.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Title: Re: One touch on 18 question
Post by: HoosierKettle on March 08, 2017, 07:23:05 AM
Post by: HoosierKettle on March 08, 2017, 07:23:05 AM
It's a thumb screw type. I wonder what my chances are of successfully removing the thumbscrew. It doesn't look rusted. No go with bare hands. I put some penetrating oil on it and I'll try again in 15. I should probably leave well enough alone.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: One touch on 18 question
Post by: HoosierKettle on March 08, 2017, 07:55:30 AM
Post by: HoosierKettle on March 08, 2017, 07:55:30 AM
Got it. Pb blaster is great stuff. I think it was 180 off and sweeps in wrong order. Anyways it's correct now and I can go back to work. 
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: One touch on 18 question
Post by: kettlebb on March 08, 2017, 07:56:36 AM
Post by: kettlebb on March 08, 2017, 07:56:36 AM
Good to know about the PB blaster, I haven't tried it yet. Good job on the fix.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Title: Re: One touch on 18 question
Post by: pbe gummi bear on March 08, 2017, 09:04:29 AM
Post by: pbe gummi bear on March 08, 2017, 09:04:29 AM
Quote from: HoosierKettle on March 08, 2017, 07:23:05 AM
It's a thumb screw type. I wonder what my chances are of successfully removing the thumbscrew. It doesn't look rusted. No go with bare hands. I put some penetrating oil on it and I'll try again in 15. I should probably leave well enough alone.
Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Does it have the ash catcher? If you can't get it off, try pulling the legs out and then moving the handle between the two other legs. I can't do the geometry in my head to make sure this works. Worst case, just put a big bend in the handle so it's aligned to where you want it. You can do this right by the thumbscrew and you won't notice it at all once it's upright
Title: Re: One touch on 18 question
Post by: Travis on March 08, 2017, 09:08:49 AM
Post by: Travis on March 08, 2017, 09:08:49 AM
Gotta love pb blaster.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk