Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: Hell Fire Grill on December 01, 2016, 06:44:36 PM

Title: Rusted out & Repaired Rapidfire
Post by: Hell Fire Grill on December 01, 2016, 06:44:36 PM
The bottom of this rapidfire rusted out right where the handle connects to the chimney, which allowed the hot coals to fall through a big Ol'fire breathing gap.

(http://i1078.photobucket.com/albums/w493/HellFireGrill/rusted%20out%20rebuilt%20rapdfire/rusty%20rebuilt%20rapidfire%202016-11-12%20031_zpsmmrhszyz.jpg)

(http://i1078.photobucket.com/albums/w493/HellFireGrill/rusted%20out%20rebuilt%20rapdfire/rusty%20rebuilt%20rapidfire%202016-11-12%20037_zpsxqnyuoq0.jpg)

Fortunately when I flipped the fire grate over I bent the tabs. That made the chimney so it can never come completely apart and the grate cant fall out the bottom if its over heated...like hell fire overheated. It lights easier too since the charcoal is closer to the flame if your using pube cubes or propane.
(http://i1078.photobucket.com/albums/w493/HellFireGrill/rusted%20out%20rebuilt%20rapdfire/rusty%20rebuilt%20rapidfire%202016-11-12%20069_zpswartnlwi.jpg)

Once I started jostling it around to fix it the top rivet gave out...
(http://i1078.photobucket.com/albums/w493/HellFireGrill/rusted%20out%20rebuilt%20rapdfire/rusty%20rebuilt%20rapidfire%202016-11-12%20039_zpsz1ajbomg.jpg)

The fire grate is the only thing holding the chimney together in this pic.
(http://i1078.photobucket.com/albums/w493/HellFireGrill/rusted%20out%20rebuilt%20rapdfire/rusty%20rebuilt%20rapidfire%202016-11-12%20041_zpszxkqctyq.jpg)

Here I took the handle off the heat shield and bent the shield a little to match the chimney. Then screwed it on 180* backwards. Weber sold this accessory with replacement parts already attached.
(http://i1078.photobucket.com/albums/w493/HellFireGrill/rusted%20out%20rebuilt%20rapdfire/rusty%20rebuilt%20rapidfire%202016-11-12%20048_zpsy4xsohfb.jpg)

Ground the screws off short so they dont block any air flow.
(http://i1078.photobucket.com/albums/w493/HellFireGrill/rusted%20out%20rebuilt%20rapdfire/rusty%20rebuilt%20rapidfire%202016-11-12%20052_zpsl4m4e692.jpg)

Started reattaching the handle with new bolts.
(http://i1078.photobucket.com/albums/w493/HellFireGrill/rusted%20out%20rebuilt%20rapdfire/rusty%20rebuilt%20rapidfire%202016-11-12%20055_zpsxtzrpewj.jpg)

That should hold it together a couple more days.




Title: Re: Rusted out & Repaired Rapidfire
Post by: TheDude on December 01, 2016, 06:50:27 PM
Are you an engineer or something? The stuff you rig up is amazing, and your ability to reuse what most would throw away...
Title: Re: Rusted out & Repaired Rapidfire
Post by: Hell Fire Grill on December 01, 2016, 07:09:37 PM
nahh...just a boaring ol'fuck really
Title: Re: Rusted out & Repaired Rapidfire
Post by: HoosierKettle on December 01, 2016, 07:15:56 PM
Been there. I drilled out what was left of a couple rivets and bolted the top together. Top gave out in mine. I've got big holes rusted out on the sides but it's still together so will keep it in service as long as I possibly can. Nice work on yours.


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Rusted out & Repaired Rapidfire
Post by: HoosierKettle on December 01, 2016, 07:16:48 PM
I bought a new one but now I have two functional chimneys. That's more fun than one


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Rusted out & Repaired Rapidfire
Post by: Filibuster on December 01, 2016, 11:48:49 PM
   Just dont leave them outside and you eliminate the rusting. The ones I bought new have no rust because I bring them inside,the ones that come with the kettles I aquire I hit with a wire brush,round it out,clean the handle they're back in business. Throw that bad boy away and get a new one.
Title: Re: Rusted out & Repaired Rapidfire
Post by: Hell Fire Grill on December 02, 2016, 05:09:58 AM
I think I'll replace the rusty grate next...after that...Ill find something

Id rather fix it than nix it.

Title: Re: Rusted out & Repaired Rapidfire
Post by: swamprb on December 02, 2016, 06:56:40 AM
Dayumboy!
Title: Re: Rusted out & Repaired Rapidfire
Post by: Neil_VT00 on December 02, 2016, 07:04:53 AM
Quote from: Hell Fire Grill on December 02, 2016, 05:09:58 AM
Id rather fix it than nix it.

I'm with you @Hell Fire Grill.  Nice work.
Title: Re: Rusted out & Repaired Rapidfire
Post by: swamprb on December 02, 2016, 10:17:30 AM
I noticed you did the fire grate mod - Effin' Magnificent!!
Title: Re: Rusted out & Repaired Rapidfire
Post by: Hell Fire Grill on December 02, 2016, 03:27:36 PM
I went out to my garage and got distracted away from working on a fire grate for this, but I did work on something really cool...
Title: Re: Rusted out & Repaired Rapidfire
Post by: Hell Fire Grill on December 02, 2016, 03:46:14 PM
All I'll say is I have the coolest Rapidfire charcoal chimney on the planet.

After I test it out pics will be posted of fire and flames yada...
Title: Re: Rusted out & Repaired Rapidfire
Post by: Hell Fire Grill on December 02, 2016, 04:51:42 PM
(http://i1078.photobucket.com/albums/w493/HellFireGrill/rusted%20out%20rebuilt%20rapdfire/cooler%20then...%202016-12-02%20032_zpspt0bwsos.jpg)

It held together but it didn't get hot enough. My IR was only about 900* when I dumped it.
Title: Re: Rusted out & Repaired Rapidfire
Post by: HoosierKettle on December 02, 2016, 05:49:08 PM
Awesome shot. What fuel?


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Rusted out & Repaired Rapidfire
Post by: kettlebb on December 02, 2016, 05:53:54 PM
My guess is RO Lump.


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: Rusted out & Repaired Rapidfire
Post by: Hell Fire Grill on December 02, 2016, 06:00:57 PM
Lazzari