Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: Samps on August 23, 2016, 09:45:31 AM

Title: DIY Grill Bench
Post by: Samps on August 23, 2016, 09:45:31 AM
Hey All.  I want to thank all the folks that have posted their DIY tables and benches.  I've been lurking and saving pics for a long time- and you provided great lessons and inspiration.  So, I'll take my turn and share what I did and what I might do differently after trying it.

Here's my table:


(https://lh3.googleusercontent.com/mKva-6n804bu-VJLu5uhqMaizRY7FYX2UvO08zpq-5pUFHUYwWC_vxlvez8Xo38YDQFXE0TIYRn-AVCGfq9_HVXShI5PnKHa9Y1VlU95qaLRYa3ISPCYxaNwIHuPvrnHsAdfT0BdxgpwQkunxMi0xAoO-WyVrvg1cOhjY-bcCIfBQR0vhJ9xuJVrwMjbwv8tnIubTSlTc0N6A9BgqfY-wgTMshc3GqrQUd25hlLlgJOamBtL72uN06UzDY7ZZJZ7q0ifQiOGaaXB7gpGwum54y4jVnNAC4024MjhHBpo91UZRy1wflAAOEey6x0ePkt7RlXRhI94z_cN_IG0vZUV5zaGqEYCYk7D2Aa5QAUkxv7oqSQO-w16_YgyLoxkCjEjNgA3d7hyUv3MG4omwNItrBsA1D1Ys_JwiZJM28ytlYHcvm9G5TioBqEvYK4Utq4EjPOf3O4KyT0nfW0wLBny4rgVwzBcqVfmExCzbm8SvQj9ayZHGK6zGhNWj1n63sWsSPcQmDN9QKauv1-LYu0ErYGiGjiJrZvu7wq4ICxWu8Euzf9bvwWzxubyO9rfRQuO1X9lESHIb1LA2vbE5LhZi7bMwggmmNrWvjV9gBF2Rf88BM0e=w956-h717-no)

The basics:

18.5 kettle off craigslist.  Added aftermarket ash pan and wooden handles from Brian (love them, btw.  And he was excellent to deal with). *just noticed these pics were before the handle arrived.
treated lumber.  Will stain after a bit.
Flashing for heat protection around kettle cut-out
corrugated panels in back (painted with Rustoleum)
hooks and bottle opener
Flag art from ebay
solar light added to top

Another View:

(https://lh3.googleusercontent.com/hanrB2GJwL_NmL5ze-mu2v_Xf0DAH4M3hzBsdkWC59lr_4eKs_rkYDPg1xTI5JRUxhUtrISjOiNrQbCkRenT2cOJA0URsxb83dFg2V8X0EA5Ljcxr8XL9MJQj1WcV2X93JV4DqgMIphT2AKsv1EfAqjt50KRRfDHT2Ou-MONTyRRM8DNtZ9rUyBgpTWsCfwrbE4A6aCIA8r9U_xA7jcJRAE6rtIUR5hcP9Ru97j12pA2ZfwginNm1tMnR6V15TytbkBXCtWOiU6g0TxJjZ4oPvMhuwOahNVQ-OGN3dWUvWdLrSO3jVjHpiFaIS6Dew4sDc1Fgz1oOSyBwU3yzK5SOke85Vhku8_unwrjh5v3RmK88rDRH4-_P4Q7fpYySgDi8azAl4dKA-70w0qJRobZK9LPOSUOif2wvAhnLomMxet5A5d7en2JF2P4EltvpMRjHb60CCIB91QInWAs2TWRJwNVI6FhMU3552YlwZvH457_Hz1z4iAOFA_aeDBcyYtHY3Rj1x8s9kaOHMRozF8S8m-sqotKVc697sMqhsOVJ0_RYFbJ-n-HUZAZ7Ulv1CEfIisJoKispsYEi6A2c455O3KVQBqX73jT5gWACS3nuPiWAKPB=w956-h717-no)

For the kettle, my research suggested that a 1 inch gap would be sufficient.  screwed brackets into the side of the kettle and added a ring of metal flashing for further protection.  a fire extinguisher has been added to one of the legs.  If I really want to get hot, I use the performer.

(https://lh3.googleusercontent.com/lBgh4YJV77QJwmDVn4SAj_7A8fDLbwwO_m6M3aGO9a-bf4iYND8sRMhyBGUCXKzf21T64UzjLmy-vrfnpjH86wb6sL9oLb_9-4NTlipQIhN9CI_OJZg5j1eD_JduZkoapBtOYsMHzZHFhRHjzIkilplVZ7WqhCJBQRe5amSV5yEa1CGhU1MpDpjg6036Qd7w0KyXh5AEM1DakLJkVpsNqCAMPZt15_0U3KjtmVDZXRHrwLMgB3GGqB3TkKjqGC6qi4XLFgkfbCkymexnwOXg9CTmZhs2HCVdiVoGbgiL9OUuDH7iQ1R9lSuwEcIr3DEdN6XHS8N3eF47255l-GpgydQbub7fzzswIZs_u1EhYApAtH6EI8PSG6hbLpRqSIwTszfufxoMUKiacdzRTpkcYSA2tGuytTlr0OHxB8fjgZtiIKUpVY7Zb9joKQidf3yfU_9VwDKuae16YMI5cwnr2c_YTc5Pj6-b4ek1GWh_36jOoi_s-Evtdx3NV3o7LcXFjWBIKtQw5GwNoGYngb0x09XgaWVsTzJDObEjadFNK4FHdiCTCbyWFLc5fmy03vwbu3TaNZefkb2VA5R5idAKWl1OhyzY0fQCsAIHL7Z7l5O4LMKV=w956-h717-no)

This pic was before the back was added and the grill suspended, but it shows the solar light added to the top.  I had figured a few lights would be necessary, but this one small light from HD was sufficient.  The cell phone pic makes this look more harsh than it does in reality.

(https://lh3.googleusercontent.com/DWV9-4x4IFB9mYjBRNwnGCxNXV6UaIGnPf27G27AaILOZ7B4P8dNS3QrlzJAEI-24Kh2XuS0NUcQzogTskSeI10QLYaUKffh7KnNtBqWUCFF7b-GOgNj4aa3JF9QAEiwCsB9GSjDzIiGJ5C5MFInNloo4_LFHpuAHjmtKrmE8jReBJ3eohrVW74sCjg0jhEsRia0qy3WHrRxnh5XbUwcPCvHuIw2VB6_0AYViCdSgsNMAfJh8zh8p7EblhRkOpOK0zfojUnc7CuCfvHDRUJSaA06gnxSr6FIw5_ctl-UHYvH3avqS6AUztSXA_nUhhsdEBZ4Qui0qPUgT_LjkxcozeWwGQ8nhqAiQiB2PgAW8Jjcy-JTKsTjkTyETVii0ctYZbmU3qJTYuLlI5fSYg8NfUjGtjpnGZ9ji8yaI_1-Vb5IIC6iyOK9rZ_md2oHIlM2wEu1pJI6xMJcRMZ99bbFPo7tWds7aqlOdT6odqCXo17Meb-yTmtBmyaSW3XxIQdV6FrEzZSPq8BKkx0wIADdJ4da_no7SHjY1Ja3Jq3oFFs8iH1ARGEQsp7akzkEvyzQB6lJp_MJAGdK_fZkUHi2g5iJlrQJ-jTtNS-NzPD0PqDDgFji=w956-h717-no)


The one regret I have is that I didn't dry the lumber out a bit before putting it together. I clamped the heck out of the table top, and the emerging gaps have exceeded what I expected (and warped the top left a bit).  Also, I stapled the flashing into the cut-out, and the dried out lumber has caused it to be a little less flush to the circle. 

While I thought a good bit about the measurements, I neglected to consider the width of corrugated panels.  The top section left a gap, which I filled by adding and extra 2x4 and the small shelves.  I thought it would throw off the symmetry, but I actually like the resulting shelves. (the night picture is how I thought I'd leave it.)

Next steps, stain the whole thing and add some kind of bar or hook to the end to hold the lid when I take it off.  I also need to swap out the blue rhino tailgate grill with a Weber Q.  Need the quick grill for busy weekday evenings.

Thanks again to all for the inspiration.  This was a really fun project.

Steve

Title: Re: DIY Grill Bench
Post by: MikeRocksTheRed on August 23, 2016, 09:53:40 AM
Awesome build!   Love the lit flag!
Title: Re: DIY Grill Bench
Post by: Darko on August 23, 2016, 10:03:08 AM
Wow! That's an awesome looking table. Very nice work.
Title: DIY Grill Bench
Post by: Mr.CPHo on August 23, 2016, 10:10:16 AM
Very nice.  This gives me just a little more confidence to create my own table/cart for my WSM


Sent from my iPhone using Weber Kettle Club mobile app (https://siteowners.tapatalk.com/byo/displayAndDownloadByoApp?rid=91018)
Title: Re: DIY Grill Bench
Post by: MikeRocksTheRed on August 23, 2016, 12:09:32 PM
I might have to do something like this.  I'm in an apartment right now, so I don't want to make anything too permanent, but I know my girlfriend would like it if some of my grills were built into a table or tables in stead of just sitting on the patio.  I'm thinking I could do a few of these that would all fit together in several different arrangements in case I move and end up with a different patio configuration.
Title: Re: DIY Grill Bench
Post by: stellato1976 on August 23, 2016, 04:12:00 PM
nice work
Title: Re: DIY Grill Bench
Post by: WhaleinaTeardrop on August 23, 2016, 04:18:44 PM
Great looking table; how long did it take you to find such straight boards?  The Lowe's and HD closest to me are hit or miss....
Title: Re: DIY Grill Bench
Post by: Travis on August 23, 2016, 04:38:36 PM
Very nice work, bud! Love how it lights up.


Sent from my iPad using Tapatalk
Title: Re: DIY Grill Bench
Post by: 1ROW on August 23, 2016, 07:51:28 PM
That's a great build, very well done! Where did you pick up the solar light?
Title: Re: DIY Grill Bench
Post by: jcnaz on August 23, 2016, 07:58:39 PM
Very cool!

Sent from my SM-G900V using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)

Title: Re: DIY Grill Bench
Post by: captjoe06 on August 24, 2016, 02:05:54 AM
So functional.  I see the Performer getting neglected or relegated to start the chimney with the gas-assist duty only.

Great job!
Title: Re: DIY Grill Bench
Post by: Geezer on August 24, 2016, 03:18:30 AM
Great looking table.
Title: Re: DIY Grill Bench
Post by: Samps on August 24, 2016, 04:43:27 AM
Thanks.

Whale, I was picky on the boards. probably passed two for every one I took, and they still aren't all right.  Used reward points for a HD card, so it made me stick to the box store.

1ROW: the solar light is Home Depot.  $19.97 "Outdoor Solar Powered LED Black Flag Light" by Hampton Bay.

CaptJoe: You'd think this would be my go-to, but I find that I tend put all the stuff on this bench, but still grill on the performer right next to it. Probably because the one in the table is an 18.5.
Title: Re: DIY Grill Bench
Post by: Samps on August 24, 2016, 04:46:15 AM
BTW, does anyone have a bright idea for hanging the kettle hood?  I could just put a bar on the end.  Although since I added Brian's wood handle and cut the side handle completely off, I was thinking of finding a way to use original weber kettle handles in some way.  I'm definitely not pitching them, and they need a purpose.