I just picked up this sweet looking Weber 2726 firepit today thanks to the heads up alert from @brewtownbeatdown. The lid is in phenomenal shape and the mid section is brand new. The bowl on the other hand is not in the best of shape. Major porcelain cracking on the entire underside of the bowl. A question to all the 2726 firepit owners, are you seeing porcelain cracking like this? I'm contemplating ordering a new bowl from Weber for $60.
(http://uploads.tapatalk-cdn.com/20160604/18ed2e82ffd7ac72a84e223e767913bf.jpg)(http://uploads.tapatalk-cdn.com/20160604/aaaac7163face49803659b78079f0d3c.jpg)(http://uploads.tapatalk-cdn.com/20160604/1775a50570e8156dee7e2097af943375.jpg)(http://uploads.tapatalk-cdn.com/20160604/6b497e90993e847b6e67e6230213a669.jpg)
Sent from my iPhone using Tapatalk
From what I can tell, it's expected if you don't burn with a level of sand on the bottom of the bowl when you burn. That being said : I picked up a pit where they only used it once. It had the same problem , so use it and order another bowl after you get frustrated.
Sent from my iPhone using Tapatalk
I picked up a NIB last year. I've used it 3 times and already have the same problem as you. I didn't use sand because I thought it would be to hard to clean out ash. I like being able to just dump it out and not always have sand around to refill it.
Sent from my SAMSUNG-SM-G930A using Tapatalk
I put a 22 charcoal grate in the bottom of mine after my 1st use. That 1st use caused the same issues on my bowl, but I don't think it looks quite as bad as yours. Works much better now.
I roached the shit out of my top and bottom....."C'est la vie"
My DE 26 kettle has crazing all around the bowl. I don't worry, it cooks like a champ and probably will for the next 20 years.....
Quote from: landgraftj on June 04, 2016, 10:33:42 AM
I put a 22 charcoal grate in the bottom of mine after my 1st use. That 1st use caused the same issues on my bowl, but I don't think it looks quite as bad as yours. Works much better now.
Wow, crazing and cracking after one use huh? Were these fire pits made in China of lesser quality porcelain enamel or something? I've banked ripping coals many times in my kettles and even burned fires without issues like what I've seen in this fire pit. Just doesn't seem right.
Sent from my iPhone using Tapatalk
I've got a new one that I have never used yet but the instructions says to put sand in the bottom of the bowl. I just looked at the owner's manual. It says to use at least 2 pounds of sand in the bottom to help insulate the bottom of the firepit. I would say that the person you got the firepit from did not use sand or not enough of it.
Wayne
I just went out to the garage to check mine. I only use my fire pit once a year - on Halloween night out in the driveway. Mine has the same crazing marks as well. However, it is very light and I had to hold my bowl up at a certain angle to the light to see them. I have never used sand in mine. I have always used a 22.5 charcoal grate to keep the heat from making direct contact with the bowl. I think now I will change the grate from a 22.5 charcoal grate to a 26.75 charcoal grate or maybe a 22.5 cook grate to raise it up even higher?
Being that this is a discontinued item from Weber, I was under the assumption that a new replacement bowl was no longer available? Does anyone know for sure if these are still available from Weber?
@ramsfan - I called Friday and was quoted $60 for the bottom bowl, ~100 units left in inventory. Leg kit was $27.
Sent from my iPhone using Tapatalk
Congrats
@crumbsnatcher! I'm glad you ended up with one. I know you were looking for a while. I have no cracking, and have never used anything in my bowl. Do you know if they had any aluminum heat pans(ash pans) in stock?
Quote from: bladz on June 05, 2016, 05:09:12 PM
Congrats @crumbsnatcher! I'm glad you ended up with one. I know you were looking for a while. I have no cracking, and have never used anything in my bowl. Do you know if they had any aluminum heat pans(ash pans) in stock?
Thanks man. Took a while finally score a fire pit. Gonna put it to good use. These definitely don't come up very often. BTW, I'm not sure about the heat shield pan because mine is still in good shape so I didn't Inquire with Weber CS during my call.
Sent from my iPhone using Tapatalk
Quote from: 70monte on June 04, 2016, 03:29:59 PM
I've got a new one that I have never used yet but the instructions says to put sand in the bottom of the bowl. I just looked at the owner's manual. It says to use at least 2 pounds of sand in the bottom to help insulate the bottom of the firepit. I would say that the person you got the firepit from did not use sand or not enough of it.
Wayne
Interested in parting with it at all?
Sent from my Pixel using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Quote from: MTW524 on December 02, 2016, 05:53:30 PM
Quote from: 70monte on June 04, 2016, 03:29:59 PM
I've got a new one that I have never used yet but the instructions says to put sand in the bottom of the bowl. I just looked at the owner's manual. It says to use at least 2 pounds of sand in the bottom to help insulate the bottom of the firepit. I would say that the person you got the firepit from did not use sand or not enough of it.
Wayne
Interested in parting with it at all?
Sent from my Pixel using Weber Kettle Club mobile app (http://r.tapatalk.com/byo?rid=91018)
Not at this time but thanks for asking.