Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: Shoestringshop on March 30, 2016, 01:25:32 PM

Title: Wire lid hanger for the Master Touch grill Question
Post by: Shoestringshop on March 30, 2016, 01:25:32 PM
Has anyone ever tried to put a Wire lid hanger for the Master Touch grill 22" onto a 18"? I was thinking I could maybe bend it to get the lid to open to a full 90° like the 2015 grills... Any and all thoughts welcome!!

Thanks
Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: firedude5015 on March 30, 2016, 02:54:17 PM
I put a performer lid bale on an 18
Makes a slight funky bend, but works great. And yes it holds the lid almost at 90 degrees.

(http://uploads.tapatalk-cdn.com/20160330/ab5822db830e71c64081178e1945b8ec.jpg)
(http://uploads.tapatalk-cdn.com/20160330/e356bcc938d79582532f73d64e61d1ad.jpg)

Sent from my SAMSUNG-SM-G870A using Tapatalk
Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: Shoestringshop on March 30, 2016, 03:27:11 PM
@firedude5015 Thanks... Looks just like I thought it would! I a going to do it!
Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: firedude5015 on March 30, 2016, 03:28:43 PM
The lid doesn't slide as smoothly as a 22 lid, but I LIKE it.

Sent from my SAMSUNG-SM-G870A using Tapatalk

Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: Shoestringshop on March 30, 2016, 03:29:51 PM
@firedude5015 Did you just eyeball it to fit when drilling?
Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: firedude5015 on March 30, 2016, 03:30:58 PM
Yes..I did the top 2 holes first,  then let the bottom fall where it wanted

Sent from my SAMSUNG-SM-G870A using Tapatalk

Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: Shoestringshop on March 30, 2016, 03:31:47 PM
@firedude5015 Thanks for the tip!
Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: firedude5015 on March 30, 2016, 03:33:02 PM
Any time

Sent from my SAMSUNG-SM-G870A using Tapatalk

Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: indy82z on March 30, 2016, 03:48:47 PM
The sell one for the 18" also....they made the 18" platinum. I remember seeing it was only like $8 or something like that if you want to go that route..
Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: addicted-to-smoke on March 30, 2016, 04:34:40 PM
Quote from: indy82z on March 30, 2016, 03:48:47 PM
The sell one for the 18" also....they made the 18" platinum. I remember seeing it was only like $8 or something like that if you want to go that route..

The "hangar wire" (bale) is I think still available but the bracket and support bracket probably aren't.


Hotrod 18, now 15+ yrs old

(http://ecx.images-amazon.com/images/I/419Y2AC88VL.jpg)

Checking ereplacements.com they also list dark blue and another blue ... never seen any of 'em.
Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: Josh G on March 31, 2016, 02:21:17 PM
I used the 18" platinum bale with the 22" bracket and strap for an 18" MT and it worked fine.  I just had to set it up a little off center so the one touch sweep would close completely.   I'm probably the only person that would notice it's not directly centered opposite the handle. 
Title: Re: Wire lid hanger for the Master Touch grill Question
Post by: firedude5015 on March 31, 2016, 05:03:38 PM
Quote from: Josh G on March 31, 2016, 02:21:17 PM
I used the 18" platinum bale with the 22" bracket and strap for an 18" MT and it worked fine.  I just had to set it up a little off center so the one touch sweep would close completely.   I'm probably the only person that would notice it's not directly centered opposite the handle.
Thanks for reminding me Josh.
I ended up trimming 1/2" off the back sweep because of the bracket. I kinda squeezed the sweep together and all still works fine

Sent from my SAMSUNG-SM-G870A using Tapatalk