Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: Ashcan Ted on March 29, 2016, 07:03:00 PM

Title: Slight pitting on redhead '92 MT lid
Post by: Ashcan Ted on March 29, 2016, 07:03:00 PM
Any solutions to repairing a few very small pitting spots on the lid of a redhead?  My '92 MT is in great shape but I'm trying to reach close to full restoration.  I searched the old forums and only came across some discussion about red cal paint when you're ready to paint.  These spots are only a few MMs across.  Any guidance?  Thanks!
Title: Re: Slight pitting on redhead '92 MT lid
Post by: addicted-to-smoke on March 30, 2016, 03:10:30 AM
A picture might help, but generally there isn't much you can do about missing paint on a cooker, especially if you want it to match. "Lookers" not subject to heat have some more options.
Title: Re: Slight pitting on redhead '92 MT lid
Post by: brewtownbeatdown on March 31, 2016, 04:29:36 AM
Red caliper paint would work best if you plan on cooking on your MT.  Spray the paint on a fine brush (Q-tip works also) & paint in the pits. Multiple coats will fill the pit close to level, but will become brighter red each coat (caliper paint will darken a little with heat over time).  Once dry, just run a razor blade around painted pits to get excess paint off the good porcelain.