Weber Kettle Club Forums

Grill Talk => Weber Kettle Forum => Topic started by: JP on March 08, 2016, 03:22:02 AM

Title: Overheated Performer
Post by: JP on March 08, 2016, 03:22:02 AM
Hi



Few days ago i noticed that there are some scrathes in bottom of my performer and briquette bin was partly melted.

I contacted Weber CS and they said it must have been seriously overheated. I wonder how this is possible. I'm still waiting for they answer if they will replace damaged parts. Has this ever happened to anyone else?


(http://uploads.tapatalk-cdn.com/20160308/e836ce06ae4191f1e89697923d052f0d.jpg)

(http://uploads.tapatalk-cdn.com/20160308/23c171cb4eaaabbf6fe890da9823a04a.jpg)






Lähetetty minun Nexus 5X laitteesta Tapatalkilla
Title: Re: Overheated Performer
Post by: LightningBoldtz on March 08, 2016, 03:38:15 AM
Agreed, you musta had a REALLY hot fire in that thing
Title: Re: Overheated Performer
Post by: jfbincypress on March 08, 2016, 04:02:14 AM
Wow! I've never seen that, but I'm a newbie to the Performer world.


Sent from my iPhone using Tapatalk
Title: Re: Overheated Performer
Post by: SteveZ on March 08, 2016, 04:46:22 AM
Check the brass elbow for cracks. The one that holds the orifice. My ssp had a crack that ignited the elbow. Just a thought.
Title: Re: Overheated Performer
Post by: kettlecook on March 08, 2016, 04:53:19 AM

Quote from: SteveZ on March 08, 2016, 04:46:22 AM
Check the brass elbow for cracks. The one that holds the orifice. My ssp had a crack that ignited the elbow. Just a thought.

Yeah, I'm thinking this had to be related to the charcoal burner.


Sent from my iPhone using Tapatalk
Title: Re: Overheated Performer
Post by: ramsfan on March 08, 2016, 05:24:20 AM
Did the lid bale rollers melt too? If you had a really hot fire going, they would have melted first, before the charcoal bin because they are closer to the bowl. If the plastic lid bale rollers did not melt, but the charcoal bin did, then you must have had an external flame coming from around the gas orifice.
Title: Re: Overheated Performer
Post by: JP on March 08, 2016, 05:27:46 AM
Quote from: ramsfan on March 08, 2016, 05:24:20 AM
Did the lid bale rollers melt too? If you had a really hot fire going, they would have melted first, before the charcoal bin because they are closer to the bowl. If the plastic lid bale rollers did not melt, but the charcoal bin did, then you must have had an external flame coming from around the gas orifice.
No, they did not melt.

Lähetetty minun Nexus 5X laitteesta Tapatalkilla

Title: Re: Overheated Performer
Post by: Gpinch1 on March 08, 2016, 05:39:01 AM
The bottom of the used Weber Fire Place that I bought looks like that.

Looking forward to hearing if you have any luck with Weber replacing it.

Greg
Title: Re: Overheated Performer
Post by: Hell Fire Grill on March 08, 2016, 06:58:56 AM
Are you the only owner/operator of the grill?

There's some smoke on the bottom of the kettle. That normally only happens momentarily when theres a big hot, greasy, fire in the grill that was allowed to burn unchecked, then the lid gets put on (to control it) and the heat & flames jump out the bottom vents briefly.

All that heat didnt appear to melt the table top, or it was relpaced after.

Im not familiar with the gas supply line being metal, Iv only seen rubber lines on older SS grills.

My first guess is the touch & go was used with a big pile of fuel and was left unattended while the rig went nuclear and had a melt down.

Second guess is there was a gas leak from a broken part that torched some stuff.

Title: Re: Overheated Performer
Post by: JP on March 08, 2016, 08:43:51 AM
Quote from: Hell Fire Grill on March 08, 2016, 06:58:56 AM
Are you the only owner/operator of the grill?

Yes, it's less than three years old

Quote
There's some smoke on the bottom of the kettle. That normally only happens momentarily when theres a big hot, greasy, fire in the grill that was allowed to burn unchecked, then the lid gets put on (to control it) and the heat & flames jump out the bottom vents briefly.

All that heat didnt appear to melt the table top, or it was relpaced after.

Im not familiar with the gas supply line being metal, Iv only seen rubber lines on older SS grills.

My first guess is the touch & go was used with a big pile of fuel and was left unattended while the rig went nuclear and had a melt down.

Second guess is there was a gas leak from a broken part that torched some stuff.

I haven't used touch and go for a while, and when use it i will never put more fuel than one chimney. and i only use it for 5-10 minutes.
I will have to check touch &  go for leaks.

Title: Re: Overheated Performer
Post by: MikeRocksTheRed on March 08, 2016, 08:45:20 AM
@JP - Are you using lighter fluid that might have ran down into the ashpan and caught fire?
Title: Re: Overheated Performer
Post by: JP on March 08, 2016, 09:02:18 AM
Quote from: MikeRocksTheRed on March 08, 2016, 08:45:20 AM
@JP - Are you using lighter fluid that might have ran down into the ashpan and caught fire?
No


Title: Re: Overheated Performer
Post by: ramsfan on March 08, 2016, 04:49:47 PM
I had several Performers in the past where a small flame would still remain in that little hole at the gas orifice that is shown in the picture. The gas would be completely shut off, but the flame would remain. I would have to blow the flame out like a birthday candle. I don't know if this is similar to your problem? Could be? Turn your gas on, light the flame in the bowl, then shut the gas off and watch that orifice area. See if a small flame doesn't remain lit in that hole in the gas orifice? I actually had to take a video with my cellphone of mine doing this and send it to Weber to show them proof of what I was talking about.

However; the fact that your plastic bale rollers show no signs of melting or heat damage should indicate that there was not a raging hot fire in the bowl. I just don't see how a super hot fire in the bowl could damage the plastic charcoal bin that is about a foot away from the bowl, yet the plastic bale rollers that are right next to the bowl remained undamaged?

I believe there was some sort of fire that occurred at the gas orifice connection area due to a possible gas leak at that spot? However; there doesn't appear to be any heat damage to the underside of the plastic thermoset table that is right above in that spot? Beyond that, I can't think of what it could be? Keep us posted if you solve the mystery.
Title: Re: Overheated Performer
Post by: toolhead on March 08, 2016, 05:30:33 PM
At 3 years old the rust on the gas burner bracket is fairly excessive...ive seen that rust buildup on 10+ year performers gas burner brackets.

Ive had half dozen 3-5 year performers which didnt have rust on the gas burner bracket...

Unless what im seeing is not rust?.

If you didnt have 800+ degree cooks going its very possible that you could simply have had a defective /poorly enameled bowl which is failing..ive never seens scratches /cracks like you are showing on your bowl
Title: Re: Overheated Performer
Post by: toolhead on March 08, 2016, 05:33:29 PM
I just noticed you are in finland..are you cooking in subzero temp? ..lighting up a kettle in -20 degree weather with a fast rise cook temp could cause the enamel crack due to extreme temp swings?
Title: Re: Overheated Performer
Post by: Hofy on March 08, 2016, 07:37:50 PM
This has happened  A LOT with high heat cooks.   Here is my brick red less than 2 years old.   A call to Weber and in less than 48 hours I had a new bowl on my door step.

(https://lh3.googleusercontent.com/-ZLA_NQnGiWw/T7FBhVjF3II/AAAAAAAAA2s/nUBnfIdNP4k/s800-Ic42/IMG_0556.JPG)
Title: Re: Overheated Performer
Post by: JP on March 08, 2016, 10:43:58 PM
I just got reply from Weber, they will send me new bowl becouse it has 5 years warranty, but not charcoal bin becouse it only has 2 years warranty and it should not melt like that if used normally.  They also said that if grill is heated over  300 celcius it's overheated.
Title: Re: Overheated Performer
Post by: SmokenJoe on March 08, 2016, 11:21:16 PM
300 degrees Celsius is only 572 degrees Fahrenheit.  You can barely cook Pizza at that temp ???   Doesn't make sense to say that 300C is overheated ???

One of my C&B Grass Green Perf Dlx has bad crazing around the entire circumference of the bowl and badly melted rollers.  Of course Weber CS, in the USA, is very very good about replacing damaged parts.   Sooooooo, if your crazing is isolated to the fire tube side of the bowl, then something probably left the Touch-n-Go starter "lit" for quite some time, or, it had a excessive flow of LPG that caused flames from both ends of the tube ???   I can't explain why the thermoset table survived, but I'd watch your start up very carefully for a while to observe any strange flames !!!

BTW, I still use the C&B, crazing and all, she cooks just fine and she looks kind of rugged :)  ;D                                    SJ
Title: Re: Overheated Performer
Post by: JP on March 09, 2016, 12:05:16 AM
Quote from: SmokenJoe on March 08, 2016, 11:21:16 PM
300 degrees Celsius is only 572 degrees Fahrenheit.  You can barely cook Pizza at that temp ???   Doesn't make sense to say that 300C is overheated ???

One of my C&B Grass Green Perf Dlx has bad crazing around the entire circumference of the bowl and badly melted rollers.  Of course Weber CS, in the USA, is very very good about replacing damaged parts.   Sooooooo, if your crazing is isolated to the fire tube side of the bowl, then something probably left the Touch-n-Go starter "lit" for quite some time, or, it had a excessive flow of LPG that caused flames from both ends of the tube ???   I can't explain why the thermoset table survived, but I'd watch your start up very carefully for a while to observe any strange flames !!!

BTW, I still use the C&B, crazing and all, she cooks just fine and she looks kind of rugged :)  ;D                                    SJ

I'll specify.. ;)
Customer service said that if grill is heated much more than 300c then its overheated. But didn't specify how much is "much".  I'll have to check gas ignition system and make sure it works properly.
Title: Re: Overheated Performer
Post by: Filibuster on March 09, 2016, 12:30:38 AM
    Thats exactly how both my C&B performers came to me, never thought of escaping flames as a possible cause. Very interesting.
Title: Re: Overheated Performer
Post by: MeatAndPotatos on March 09, 2016, 11:41:32 AM
Quote from: toolhead on March 08, 2016, 05:33:29 PM
I just noticed you are in finland..are you cooking in subzero temp? ..lighting up a kettle in -20 degree weather with a fast rise cook temp could cause the enamel crack due to extreme temp swings?
Im still mostly curious how he could melt the coal bucket like that without damaging the rollers....
Title: Re: Overheated Performer
Post by: MikeRocksTheRed on March 09, 2016, 11:54:06 AM
Between my KettlePizza and my vortex I have had my 96 SS Performer well over 1000 F.  My infrared only goes up to 1022 F then reads "HI" and I've had it do that plenty of times.  I've had no damage to my kettle finish other than melting the plastic on my lid vent when I accidentally left it open using my kettlepizza.  I'm guessing the craving we see on some grills has to do with a bad porcelin or enamel job, or something in that process that wasn't quite right.

My lid handle did break off, but it was a bit wobbly when I got it about a year ago.  I'm sure hot cooks didn't help, but when it broke off I could see there was a little bit of rust where it broke.  Luckily it left to small holes in the lid, so I just drilled matching holes in the handle and bolted it back on with SS bolts.  The weird thing is that I had recently done a hot cook or two where the handle held up fine, then when it finally popped I was doing a medium heat (350-400F) cook. 
Title: Re: Overheated Performer
Post by: SmokenJoe on March 09, 2016, 12:00:09 PM
Quote from: MeatAndPotatos on March 09, 2016, 11:41:32 AM
Quote from: toolhead on March 08, 2016, 05:33:29 PM
I just noticed you are in finland..are you cooking in subzero temp? ..lighting up a kettle in -20 degree weather with a fast rise cook temp could cause the enamel crack due to extreme temp swings?
Im still mostly curious how he could melt the coal bucket like that without damaging the rollers....

I can see that happening with a starter FULL of hot coals going into a very cold kettle, but that's typically not how a performer is used.  It's TnG warms the entire kettle while it's on for 5-7 minutes or so  ...  not such a shock to the kettle in that case.

No damage to the rollers kind of indicates that the "kettle" was NOT "overheated"  ...  only damage was near the TnG.

I'd make a stronger case with Weber CS, THEY may have a faulty TnG design (in some cases).                         SJ

Title: Re: Overheated Performer
Post by: MikeRocksTheRed on March 09, 2016, 12:05:11 PM
Quote from: SmokenJoe on March 09, 2016, 12:00:09 PM
Quote from: MeatAndPotatos on March 09, 2016, 11:41:32 AM
Quote from: toolhead on March 08, 2016, 05:33:29 PM
I just noticed you are in finland..are you cooking in subzero temp? ..lighting up a kettle in -20 degree weather with a fast rise cook temp could cause the enamel crack due to extreme temp swings?
Im still mostly curious how he could melt the coal bucket like that without damaging the rollers....

I can see that happening with a starter FULL of hot coals going into a very cold kettle, but that's typically not how a performer is used.  It's TnG warms the entire kettle while it's on for 5-7 minutes or so  ...  not such a shock to the kettle in that case.

No damage to the rollers kind of indicates that the "kettle" was NOT "overheated"  ...  only damage was near the TnG.

I'd make a stronger case with Weber CS, THEY may have a faulty TnG design (in some cases).                         SJ

Great points @SmokenJoe.  You would also think that if the TnG was the cause, there would be some sign of fire or smoke on the bottom of the table which I'm not seeing.

@JP -  Are you on good terms with all of your neighbors?  LOL
Title: Re: Overheated Performer
Post by: SmokenJoe on March 09, 2016, 12:18:53 PM
@JP, @MikeRocksTheRed    I just took another look at your original pics.   IMHO you have a major issue with your TnG system.  It must be the case that the melting/scorching point of the thermoset table is higher than that of the charbin.   When you re-contact CS make certain that you aren't just asking for a bowl, you deserve a charbin AND an entire TnG system including the LPG regulating device.  Something is NOT right with your Performer.                              SJ
Title: Re: Overheated Performer
Post by: stellato1976 on March 10, 2016, 02:42:52 AM
I have the same problem.  My charcoal bin melted just like that. Please let me know what Weber says.
Title: Re: Overheated Performer
Post by: JP on March 10, 2016, 03:38:02 AM


Quote from: stellato1976 on March 10, 2016, 02:42:52 AM
I have the same problem.  My charcoal bin melted just like that. Please let me know what Weber says.

Do you have gas assist on your Performer?
I will investigate my gas assist during weekend and then get back to Weber CS.
Title: Re: Overheated Performer
Post by: stellato1976 on March 10, 2016, 07:57:38 AM
Yes I have the gas assist.. I thought it was caused by banking my coals on that side.. not sure but it should not melt like that
Title: Re: Overheated Performer
Post by: Hell Fire Grill on March 10, 2016, 07:59:42 AM
Quote from: JP on March 08, 2016, 08:43:51 AM
Quote from: Hell Fire Grill on March 08, 2016, 06:58:56 AM
Are you the only owner/operator of the grill?

Yes, it's less than three years old

Quote
There's some smoke on the bottom of the kettle. That normally only happens momentarily when theres a big hot, greasy, fire in the grill that was allowed to burn unchecked, then the lid gets put on (to control it) and the heat & flames jump out the bottom vents briefly.

All that heat didnt appear to melt the table top, or it was relpaced after.

Im not familiar with the gas supply line being metal, Iv only seen rubber lines on older SS grills.

My first guess is the touch & go was used with a big pile of fuel and was left unattended while the rig went nuclear and had a melt down.

Second guess is there was a gas leak from a broken part that torched some stuff.

I haven't used touch and go for a while, and when use it i will never put more fuel than one chimney. and i only use it for 5-10 minutes.
I will have to check touch &  go for leaks.

How are you lighting the coals if your not using the T&G?
Title: Re: Overheated Performer
Post by: JP on March 10, 2016, 08:30:28 AM
Quote from: Hell Fire Grill on March 10, 2016, 07:59:42 AM
Quote from: JP on March 08, 2016, 08:43:51 AM
Quote from: Hell Fire Grill on March 08, 2016, 06:58:56 AM
Are you the only owner/operator of the grill?

Yes, it's less than three years old

Quote
There's some smoke on the bottom of the kettle. That normally only happens momentarily when theres a big hot, greasy, fire in the grill that was allowed to burn unchecked, then the lid gets put on (to control it) and the heat & flames jump out the bottom vents briefly.

All that heat didnt appear to melt the table top, or it was relpaced after.

Im not familiar with the gas supply line being metal, Iv only seen rubber lines on older SS grills.

My first guess is the touch & go was used with a big pile of fuel and was left unattended while the rig went nuclear and had a melt down.

Second guess is there was a gas leak from a broken part that torched some stuff.

I haven't used touch and go for a while, and when use it i will never put more fuel than one chimney. and i only use it for 5-10 minutes.
I will have to check touch &  go for leaks.

How are you lighting the coals if your not using the T&G?
In wintertime i normally use chimney becouse gas does not work properly when its very cold, but in summertime i use touch & go.


Title: Re: Overheated Performer
Post by: Erich on March 10, 2016, 07:00:06 PM
I'll bet you had a flashback and a flame burning where the orifice exits the rubber hose.  Check the burner tube for a spider web or other crud.  check the hose for damage or leaks.
Title: Re: Overheated Performer
Post by: SmokenJoe on March 10, 2016, 07:03:48 PM
@Erich, nice to hear from you via the forum   ...   how's the project going ???                                   SJ
Title: Re: Overheated Performer
Post by: JP on March 11, 2016, 09:23:02 AM
So, today i investigated touch & go system and shot few videos :)
It seems that sometimes touch n go backfires, and unless i dont turn gas off really tight small fire stays on. What do you think, is this normal?


https://goo.gl/photos/BMyaCur1FEYkqEMR6

SLOW MOTION :)
https://goo.gl/photos/f7cvdhZudkFzY7d88
Title: Re: Overheated Performer
Post by: Erich on March 11, 2016, 05:47:53 PM
Quote from: SmokenJoe on March 10, 2016, 07:03:48 PM
@Erich, nice to hear from you via the forum   ...   how's the project going ???                                   SJ

I cleaned up the lid and bowl but the rest of the project has made no progress. :(

The honeydew list is long..........
Title: Re: Overheated Performer
Post by: SmokenJoe on March 11, 2016, 09:20:28 PM
Quote from: Erich on March 11, 2016, 05:47:53 PM
I cleaned up the lid and bowl but the rest of the project has made no progress. :(

The honeydew list is long..........

Tell me about it, I'm in the same pickle.  Maybe a little today, a little tomorrow  ...                           SJ