I started cleaning my CL Platinum today; step 1 of my planned refurb job.
Turns out I should've looked underneath the table more closely, with more light.
When I had scraped off a lot of the junk clinging to the inside surface of the grill bottom I knocked off a piece and found a rusted hole underneath one of the tabs that hold up the top grate.
Looked outside and saw another spot that's nearly rusted through, plus some serious scrapes. See:
(http://i446.photobucket.com/albums/qq181/machembree/Mobile%20Uploads/2015-10/9C15A118-A84B-4400-95F7-B92C71FAC97D_zpslf0f46kv.jpg) (http://s446.photobucket.com/user/machembree/media/Mobile%20Uploads/2015-10/9C15A118-A84B-4400-95F7-B92C71FAC97D_zpslf0f46kv.jpg.html)
Should I try to replace the bottom half of the kettle (it's black)? Shoot.
Total bummer but I don't know what to tell you. Other guys know a lot more about rehab/repair than I do. Good luck!
Maybe time to swap in some color...otherwise finding black bowls are pretty cheap.
Got one like that before. I would just use it as a cooker and consider it another vent hole.
Forgive my ignorance (I've got plenty), but when you say "use it as a cooker," is a "cooker" different than just a grill used to cook steaks burgers etc? (;-) I know, I'm a rube). In any case, it seems like I'd want to avoid cooking on a wood deck!
"Swap in some color" -- as in find a used kettle top/bottom that could be installed on a platinum? Are the Performer kettles interchangeable with mine?
I'm torn about how to proceed here. I like the Platinum set up and I could continue on undaunted. But maybe that would be good money (and energy) that would be better spent on another unit that's in better shape to start with. I really do like the SS Performers ...
I say Frankenstein it out. Pop rivet some steel patches over the holes/weak spots and she should be good to go. On second though maybe bolts would be more appropriate for Frankenstein ;)
you could use a bolt/ nut and washers to patch the holes
I'm not sure i could get a bolt/nut/washers combo to fit in that crater, since the strap/tab holding up the grate inside is located right up across the rusted hole.
I used 2 bottle caps and a self tapping screw to cover a gas burner tube hole
I like your style!
I have a lot of class /// all low
My dad used to say that -- one of his least offensive stock comments! ;-)
Quote from: TexasOnion on October 11, 2015, 03:42:15 PM
I have a lot of class /// all low
C'mon TO if your on WKC, that easily elevates you to Upper Middle Lower class for sure! ;)
#micky
IMHO a cooker is a grill your not afraid to beat up and leave dirty after a cook. However TO has a good point, just patch it up and fire it up.
Good luck
Cook on it until you find another Platinum grill that the cart is trashed and transfer the bowl to your cart! :) Or you could place a WTB (want to buy) ad in member deals section and see if anyone has either just the bowl or lid and bowl! 8)
I'd put this magnet over that hole (close up the hole in the middle with a small bolt) and continue to cook on it. m.harborfreight.com/66mm-round-magnet-96650.html?utm_referrer=https%3A%2F%2Fwww.google.com%2F in the meantime keep an eye out for a replacement bowl.
The magnet seems like a great stop-gap solution. Thanks so much for that! I will follow your suggestions and place a WTB post for a replacement bowl. Does it need to be from another Platinum? Or would a Performer bowl also fit with the Platinum frame? Thanks very much.
Quote from: micky on October 11, 2015, 10:09:12 PM
The magnet seems like a great stop-gap solution. Thanks so much for that! I will follow your suggestions and place a WTB post for a replacement bowl. Does it need to be from another Platinum? Or would a Performer bowl also fit with the Platinum frame? Thanks very much.
The Platinum and Performer bowl are the same, the Gas assist Performer has a hole in it for the burner tube, the Non gas Assist Performer and Platinum bowls are the same.
@micky If you decide to repair the damage, the post above have some good ideas.
If you decide to replace the bowl, You have (at least) two options here:
Door # 1. as stated above : seek a replacement bowl from a non gas assist performer or one touch platinum
or door number two...
Lets say you find a performer with a bowl for a good price, you may find you like the performer as a whole better then your OTP. OTP carts are great platforms for projects. You can build up a base on the lower wire rack and place a WSM on the base and now you have a WSM cart with table!
Bottom line, you have options either way here so keep your mind open as you move forward.
Okay. Thank you, 1911Ron – now I know I can look for either Performer or Platinum kettles or both.
And CharliefromLI, I'm thinking like you. I will get the magnet (thx gummi bear) and use it "as is" for now. Meanwhile my eyes will be peeled for a great SS Performer (in which case my current Platinum/cart will find a new home) or a good Performer / Platinum kettle in a good color. Luckily I have deployable friends in a lot of different CL areas!
Got a new grill grate over the weekend, before discovering the holes – the Gourmet BBQ grate with the removable circle center. It looks good and feels hefty. I plan to use the grill for wok stir fries as well as for grilling, so this is a good accessory for me. Also got a new chimney. So all in all, I'm feeling good and looking forward to my maiden voyage on this grill.
Many thanks to everyone who offered information and advice here; it was all a great help.
I don't think that the Platinum is a Touch-n-Go model. That being the case, ANY black One-Touch bowl could solve your problem. That's roughly 9 million old used kettles with big dented lids that sell everywhere for $5 to $20 almost everywhere. Hacksaw a little here, nip a little there and "Bob's Your Uncle, Fanny's Your Aunt" you've solved your problem. 'Til then, cook steak, burgers, skewered foods (like shrimp), stir-fry ... need I go on ??? Remember; "Life's an outdoor cook on an open grill." SJ
Thanks for that SmokenJoe. But you have more confidence in my abilities than i do. I'm not at all equipped to saw or otherwise manhandle a bowl that's not intended to fit my cart! I'm unlikely to be able to finesse a 3-legged bowl onto my cart -- the tripodded kettles dont have the flat connecting tabs that are used to attach thebowl to a cart, right? So I'm keeping eyes open for a performer or platinum bowl, i guess. Or the coveted SS performer ...
Quote from: micky on October 12, 2015, 07:04:53 PM
Thanks for that SmokenJoe. But you have more confidence in my abilities than i do. I'm not at all equipped to saw or otherwise manhandle a bowl that's not intended to fit my cart! I'm unlikely to be able to finesse a 3-legged bowl onto my cart -- the tripodded kettles dont have the flat connecting tabs that are used to attach thebowl to a cart, right? So I'm keeping eyes open for a performer or platinum bowl, i guess. Or the coveted SS performer ...
You are spot on no need to over complicate it!